Spring to mid-summer is the best time to take a softwood cutting of the wisteria plant; cut a piece of the new growth tips that includes several leaf sets. Take out the cutting’s lower two sets of leaves. You can also take a hardwood cutting in the winter, although softwood cuttings are usually simpler to root. A 12-inch planting pot can hold six to eight cuttings for germination.
Cuttings of wisteria can they grow in water?
Placing Wisteria cuttings in water is one of the most popular methods used by individuals to attempt and root them. It’s challenging for these plants to effectively root with this technique, though. Make sure it’s a softwood cutting if you want to attempt to root your wisteria using water. Your hardwood stems shouldn’t be submerged for an extended amount of time.
Put the base of a softwood cutting into a glass of water to keep it hydrated if you don’t plan to plant it right away. If you’re lucky, if you keep the base of the cutting submerged, it might start to produce roots.
Because wisteria dislikes having damp feet, it thrives in well-drained or even sandy soil. The ideal method for allowing your cutting to take root is to place it in a pot.
Taking Wisteria Cuttings
Obtaining the cuttings is the first step in growing wisteria from seed. Wisteria pruning, as previously indicated, can be an excellent source of cuttings, but you can also collect wisteria cuttings from the plant expressly for wisteria plant germination.
It is necessary to cut wisteria from the softwood. The wood in question is still green and lacks a woody bark. There should be at least two sets of leaves on the cutting, which should be 3 to 6 inches (7.5 to 15 cm) long.
Preparing Wisteria Cuttings for Rooting
Remove any sets of leaves discovered on the lower half of the wisteria cutting once you have it. These will be the principal locations where new roots form. The cutting should be trimmed so that the lowest node, which is where the leaves you just removed were, is 1/2 to 1/4 inch (1 to 6 ml) from the bottom. You can remove any flower buds that may be present on the cutting.
Rooting Wisteria Plants
Fill a pot with potting soil that drains properly and has been sufficiently watered. Rooting hormone should be applied to the cutting’s rooting end. Create a hole in the potting soil with a stick or your finger, then insert the wisteria cutting, carefully pressing the earth down around it.
Put some plastic wrap on top of the pot or put the entire pot in a plastic bag to completely enclose it. You might wish to use sticks to prop the plastic away from the cuttings because it is crucial that it not touch the cuts. The plastic aids in retaining humidity, which raises the likelihood that wisteria cuttings will grow successfully.
Put the wisteria cuttings in their pot somewhere where they will get enough of bright, indirect light. When the soil feels dry to the touch, check it periodically and water. Within four to six weeks, the cuttings ought grow have roots.
Knowing how to propagate wisteria properly will make it simple to grow wisteria from cuttings.
How long does it take wisteria cuttings to bloom?
Wisteria can be grown against a house wall or another robust building, like a sturdy pergola. Wisteria can be grown in a container, but only if done so as a conventional tree and with regular trimming to keep its shape. This is a highly labor-intensive option.
How to plant wisteria
Wisteria can be planted in spring or fall. Plant at the same level as it was in the original pot and water in thoroughly after thoroughly preparing the soil to guarantee a proper root run. Like an espalier fruit tree, tie the stems to horizontal galvanized wires connected to the wall. Remove all but one stem if it is climbing a pergola, and tie this stem to the post.
How to plant wisteria in a pot
Wisterias can be planted in pots, but because they are hungry plants, you will need to feed them frequently. Choose this option only if you’re training your wisteria to be a standard. Use a quality tree and shrub compost and the biggest pot you can fit. Plant at the same height as it was in the first pot and give it plenty of water.
How to care for wisteria
The wisteria plant is ravenous. During the growing season, fertilize once a month with a high potash fertilizer to promote greater flower blooming. Weekly wisteria fertilizer and watering. Use organic mulch in the fall, such as well-rotted horse dung or homemade compost, to protect your plants.
How and when to prune wisteria
Wisteria should be pruned twice a year in August and February. Focus on integrating the plant into the support throughout the first few years. This entails cutting back side shoots to five buds in early August, training in strong side shoots, and removing very low branches.
How to prune wisteria in summer
Wisteria that is pruned in the summer will produce short spurs that will transport the spring blossoms.
- Cut the long, robust shoots back from the base of the current season’s growth to a few buds.
- Choose a few sturdy shoots from young plants (less than three years old) to tie to wires or a trellis.
- Simply cut back side shoots on older wisterias to the base of your strong shoots.
Expert David Hurrion demonstrates how to prune wisteria in the summer in this little video. He demonstrates which stems to cut and how much to remove precisely:
How to prune wisteria in winter
By pruning both in winter and in the summer, you can promote the growth of the short spurs that bear the spring blooms. Anytime between late October and March is the dormant season, so do this.
- Connect fresh growth to the main structure to increase its support
- Cut back the remaining long stems sharply.
David Hurrion demonstrates how to control robust, leafy growth so it doesn’t cover budding flower buds in this video on winter-pruning wisteria:
How to propagate wisteria
Few gardeners cultivate wisteria; most opt to purchase a plant instead because it can take up to 20 years for a wisteria to bloom from a cutting. However, take softwood cuttings in the middle of April if you’re up for a battle.
- Young stems should be cut into lengths and trimmed to 10 cm, just below a leaf joint.
- Leave roughly four leaves at the top of each cutting after removing the lower ones.
- Fill pots with cutting compost, then fill them with water and let the water drain.
- Cover the cuttings with a clear plastic bag after inserting them into the pots so the leaves don’t contact.
- Make sure the cuttings are kept moist by keeping them in a well-lit area.
- Remove the bag and pot after growth is visible.
Growing wisteria: problem solving
Lack of blossoms is the most frequent issue wisteria gardeners encounter. Expecting blooms before the plant is four years old may be impractical because wisterias take their time to bloom.
David Hurrion provides tips on where to plant your wisteria, how to prune it, and how to feed it to get the most blossoms here.
Will wisteria damage my foundations?
In the spring, a house covered in wisteria looks magnificent. Can the roots harm your foundations, though? In our Quick Tips video, Catherine Mansley from BBC Gardeners’ World Magazine explains:
How can I create rooting hormone on my own?
Cinnamon, aloe vera, and honey are the three main ingredients used to manufacture rooting hormone. Although I personally like the cinnamon technique, the other options all function fairly nicely.
Cinnamon Homemade Rooting Hormone
Cinnamon works just as effectively as your standard hormone rooting powder as a rooting agent. You can give your seedlings a head start by adding a little cinnamon powder to the soil.
How to manufacture homemade rooting hormone is provided here:
- First, place a tablespoon or so of cinnamon powder on a piece of paper. Make sure the cinnamon you use is pure.
- After that, moisten the stems (this will make it easier for them to stick to the cinnamon).
- After that, coat the damp stem ends on both sides with cinnamon by rolling them in it.
- The stems should then be planted in brand-new potting soil.
The cinnamon powder will encourage your plants to grow more stems and stop fungus from developing on them. Pretty basic, yes?
Aloe Vera Homemade Rooting Hormone
- Take an aloe vera leaf and place it on your chopping board first.
- Then, point the leaf in your direction using the smallest end. Your aloe vera should be cut into from the other end.
- Push from the leaf’s end and slide the kitchen spoon in the direction of the cut. The gel will be forced out by the spoon’s pressure.
- Put the gel in a cup after that, and stir the aloe until the chunks start to resemble each other more.
- Finally, submerge your stems in the cup.
- Establish your cuttings!
Honey Homemade Rooting Hormone
- First, heat up a pot on the stove with two cups of water in it.
- Add a tablespoon or enough water to fill a large spoon after the water has thoroughly boiled.
- Stir the mixture until the honey is completely dissolved.
- Remove the honey and water mixture from the fire and let it cool for a while.
- Transfer then to a jar suitable for canning or a container with a tight lid.
- Apply the honey juice on the stems’ bottoms.
- Finally, bury the stem.
The wisteria’s rate of growth
Nothing compares to the splendor of a wisteria arbor in full bloom, but sadly, many Midwestern gardeners are unable to grow these exquisite vines.
Japanese wisteria (Wisteria floribunda) and Chinese wisteria are the two varieties of wisteria that are most frequently planted in our region ( Wisteria sinensis).
Japanese wisteria is famous for its fragrant violet blooms, which are produced in clusters that range in length from 8 to 20 inches. A cluster’s individual blooms open one at a time, starting at the base.
Chinese wisteria often has clusters that are less than 12 inches long, with slightly larger individual blooms. A cluster of flowers also has a tendency to open at the same time. Chinese wisteria is less fragrant and less resilient than Japanese wisteria. Both species have cultivars that feature white blooms.
Wisteria is an aggressive twining vine that can become highly invasive in some places. Strong support is necessary for the vines to maintain their rapid growth. When wisteria is established in the right setting, it can grow up to 10 feet each year. It functions best in neutral to slightly alkaline, deep, moist, but well-drained soils.
Since the majority of gardeners are attracted to this plant for its flowers, they are very irritated by its infamous propensity to just grow greenery. This irritating issue may be caused by a variety of factors, including the plant’s immaturity, an excess of nitrogen, a deficiency in phosphorus, poor-quality plants, and an excessive amount of shadow.
Before they can start to produce flowers, Asian wisterias need to attain a certain level of maturity. In actuality, it may take the vines up to 15 years or more to bloom.
Those who have had success with wisteria frequently advise root trimming, using superphosphate, severe shoot clipping, and planting in full light. Most importantly, you should begin with high-quality plants that were grown from cuttings of plants that are known to bloom when they are still quite young. Take cuttings of the stem tips in July if you know someone who is prepared to part with a beautiful specimen. Avoid planting seedling vines since it is impossible to predict their flowering habits due to the genetic diversity of seed reproduction.
Wait until late spring or early summer to prune these vines since they develop their blossoms on last year’s wood in mid- to late May. To keep the plant manageable and regenerative, severe pruning back to three or four buds is frequently advised.
A few native species of wisteria are a little more “tame” than their Asian counterparts. These indigenous species attain flowering age earlier than Asian species because they bloom on the growth of the current season. Although they bloom slightly later in the spring, they can rebloom throughout the summer.
The 20–30 foot tall American wisteria (W. frutescens) blooms its flowers in 4-6 inch long, compact clusters. The most popular cultivar, “Amethyst Falls,” has fragrant lavender-blue blooms. Although ‘Nivea’ has longer clusters of white blossoms, it is less aromatic.
Wisteria macrostachys, which grows in Kentucky, produces flower clusters that are 8 to 12 inches long and densely covered with blossoms. Some people believe this to be an American wisteria subspecies. The hardy Minnesota cultivar “Blue Moon” has incredibly fragrant blossoms that start to develop in June and continue throughout the summer. Both ‘Aunt Dee’ and ‘Clara Mack’ have blooms that are a light lavender color.
Types of wisteria:
There are two varieties of wisteria: Asian and American. Although aggressive growers, Asian wisterias are well-known for their stunning blossoms. American wisterias are less aggressive and still produce beautiful blossoms. Compare the most common types of wisteria.
Flower color:
Wisteria comes in a range of colors, such as white, pink, and blue tones, in addition to the well-known purple blossoms. If you believe you have seen a yellow wisteria flower, it was probably a golden chain tree (Laburnum).
Foliage:
Wisterias are deciduous, which means that when the weather becomes chilly in the fall, they lose their leaves. The misunderstanding is occasionally brought on by a different vine known as evergreen wisteria (Millettia reticulata).
Avoid planting aggressive wisterias close to your home as they can cause damage and have even been known to destroy buildings.
Wisterias can be grown in full sun or partial shade, but to promote healthy bloom development, make sure the vines get at least six hours of direct sunlight everyday. If you reside in a colder area, pick a planting location that is protected because a heavy spring frost can harm the flower buds.
Create a planting hole that is the same depth as the plant and twice as wide, then level the plant with the soil surface. Because the vines will soon fill in, you should space your plants at least 10 to 15 feet apart along the support structure.
Wisterias don’t need much care once they are planted to promote healthy growth. Water frequently over the first year until the roots take hold.
After planting, wisterias could take some time to come out of dormancy and might not start to leaf until early summer. They will leaf out at the regular time the following spring, but don’t be surprised if they don’t bloom. Wisterias take three to five years to reach full maturity and may not start blooming until then.
Wisterias grow quickly and can reach heights of up to 10 feet in in one growing season. That works out well if you need to quickly cover a fence or pergola but don’t want the vines to take over your landscape. Regular pruning (once in the summer and once in the winter) not only controls wisteria’s growth but also encourages more robust flowering by creating a framework of horizontal branches and causing spurs to grow at regular intervals.
Cut back the current year’s growth to five or six leaves in July or August, or roughly two months after the plant flowers, to get rid of stray shoots and make short branches that will produce flowers the following year. Summer pruning needs to be done more frequently. Re-prune the plant in January or February while it is dormant by removing two or three buds from the growth from the previous year.
The first few years of wisteria’s growth are crucial for creating the desired framework for the plant’s development. As soon as your wisteria begins to grow, start connecting particular lateral shoots to its support structure. You should also cut down any extra growth. An aggressive pruning may be required on older plants to promote the growth of new branches. Cut down aging branches to the main primary stem to accomplish this. The gaps will soon be filled with new side branches that can be tied back into the support structure.
Visit the Royal Horticultural Society to view a video on how to prune wisteria vines properly.