Obtaining the cuttings is the first step in growing wisteria from seed. Wisteria pruning, as previously indicated, can be an excellent source of cuttings, but you can also collect wisteria cuttings from the plant expressly for wisteria plant germination.
It is necessary to cut wisteria from the softwood. The wood in question is still green and lacks a woody bark. There should be at least two sets of leaves on the cutting, which should be 3 to 6 inches (7.5 to 15 cm) long.
Preparing Wisteria Cuttings for Rooting
Remove any sets of leaves discovered on the lower half of the wisteria cutting once you have it. These will be the principal locations where new roots form. The cutting should be trimmed so that the lowest node, which is where the leaves you just removed were, is 1/2 to 1/4 inch (1 to 6 ml) from the bottom. You can remove any flower buds that may be present on the cutting.
Rooting Wisteria Plants
Fill a pot with potting soil that drains properly and has been sufficiently watered. Rooting hormone should be applied to the cutting’s rooting end. Create a hole in the potting soil with a stick or your finger, then insert the wisteria cutting, carefully pressing the earth down around it.
Put some plastic wrap on top of the pot or put the entire pot in a plastic bag to completely enclose it. You might wish to use sticks to prop the plastic away from the cuttings because it is crucial that it not touch the cuts. The plastic aids in retaining humidity, which raises the likelihood that wisteria cuttings will grow successfully.
Put the wisteria cuttings in their pot somewhere where they will get enough of bright, indirect light. When the soil feels dry to the touch, check it periodically and water. Within four to six weeks, the cuttings ought grow have roots.
Knowing how to propagate wisteria properly will make it simple to grow wisteria from cuttings.
Can wisteria cuttings be rooted in water?
Placing Wisteria cuttings in water is one of the most popular methods used by individuals to attempt and root them. It’s challenging for these plants to effectively root with this technique, though. Make sure it’s a softwood cutting if you want to attempt to root your wisteria using water. Your hardwood stems shouldn’t be submerged for an extended amount of time.
Put the base of a softwood cutting into a glass of water to keep it hydrated if you don’t plan to plant it right away. If you’re lucky, if you keep the base of the cutting submerged, it might start to produce roots.
Because wisteria dislikes having damp feet, it thrives in well-drained or even sandy soil. The ideal method for allowing your cutting to take root is to place it in a pot.
How do you begin trimming wisteria?
Spring to mid-summer is the best time to take a softwood cutting of the wisteria plant; cut a piece of the new growth tips that includes several leaf sets. Take out the cutting’s lower two sets of leaves. You can also take a hardwood cutting in the winter, although softwood cuttings are usually simpler to root. A 12-inch planting pot can hold six to eight cuttings for germination.
How long does it take wisteria to bloom after a cutting?
Wisteria can be grown against a house wall or another robust building, like a sturdy pergola. Wisteria can be grown in a container, but only if done so as a conventional tree and with regular trimming to keep its shape. This is a highly labor-intensive option.
How to plant wisteria
Wisteria can be planted in spring or fall. Plant at the same level as it was in the original pot and water in thoroughly after thoroughly preparing the soil to guarantee a proper root run. Like an espalier fruit tree, tie the stems to horizontal galvanized wires connected to the wall. Remove all but one stem if it is climbing a pergola, and tie this stem to the post.
How to plant wisteria in a pot
Wisterias can be planted in pots, but because they are hungry plants, you will need to feed them frequently. Choose this option only if you’re training your wisteria to be a standard. Use a quality tree and shrub compost and the biggest pot you can fit. Plant at the same height as it was in the first pot and give it plenty of water.
How to care for wisteria
The wisteria plant is ravenous. During the growing season, fertilize once a month with a high potash fertilizer to promote greater flower blooming. Weekly wisteria fertilizer and watering. Use organic mulch in the fall, such as well-rotted horse dung or homemade compost, to protect your plants.
How and when to prune wisteria
Wisteria should be pruned twice a year in August and February. Focus on integrating the plant into the support throughout the first few years. This entails cutting back side shoots to five buds in early August, training in strong side shoots, and removing very low branches.
How to prune wisteria in summer
Wisteria that is pruned in the summer will produce short spurs that will transport the spring blossoms.
- Cut the long, robust shoots back from the base of the current season’s growth to a few buds.
- Choose a few sturdy shoots from young plants (less than three years old) to tie to wires or a trellis.
- Simply cut back side shoots on older wisterias to the base of your strong shoots.
Expert David Hurrion demonstrates how to prune wisteria in the summer in this little video. He demonstrates which stems to cut and how much to remove precisely:
How to prune wisteria in winter
By pruning both in winter and in the summer, you can promote the growth of the short spurs that bear the spring blooms. Anytime between late October and March is the dormant season, so do this.
- Connect fresh growth to the main structure to increase its support
- Cut back the remaining long stems sharply.
David Hurrion demonstrates how to control robust, leafy growth so it doesn’t cover budding flower buds in this video on winter-pruning wisteria:
How to propagate wisteria
Few gardeners cultivate wisteria; most opt to purchase a plant instead because it can take up to 20 years for a wisteria to bloom from a cutting. However, take softwood cuttings in the middle of April if you’re up for a battle.
- Young stems should be cut into lengths and trimmed to 10 cm, just below a leaf joint.
- Leave roughly four leaves at the top of each cutting after removing the lower ones.
- Fill pots with cutting compost, then fill them with water and let the water drain.
- Cover the cuttings with a clear plastic bag after inserting them into the pots so the leaves don’t contact.
- Make sure the cuttings are kept moist by keeping them in a well-lit area.
- Remove the bag and pot after growth is visible.
Growing wisteria: problem solving
Lack of blossoms is the most frequent issue wisteria gardeners encounter. Expecting blooms before the plant is four years old may be impractical because wisterias take their time to bloom.
David Hurrion provides tips on where to plant your wisteria, how to prune it, and how to feed it to get the most blossoms here.
Will wisteria damage my foundations?
In the spring, a house covered in wisteria looks magnificent. Can the roots harm your foundations, though? In our Quick Tips video, Catherine Mansley from BBC Gardeners’ World Magazine explains:
Is honey a suitable hormone for rooting?
Although there are numerous synthetic rooting hormones, such as liquids, powders, and gels, that can encourage rapid root growth in cuttings, if you want a natural, chemical-free alternative or you’re an organic gardener, you should surely take into account honey as a natural rooting stimulant.
Because it possesses anti-bacterial and anti-fungal qualities, honey functions well as a natural rooting hormone.
What alternative to rooting hormone is there?
You just need a tiny bit of apple cider vinegar to make this natural rooting hormone, and too much may hinder rooting. (Actually, using apple cider vinegar to kill weeds is part of utilizing vinegar in the garden.)
It need 5 to 6 cups (1.2-1.4 L) of water and 1 teaspoon of vinegar. You may get any variety of apple cider vinegar at your neighborhood grocery store.
Before “sticking” the cutting in rooting medium, dip the bottom of the cutting in your homemade rooting hormone solution.
Giving your cuttings the extra boost they require to develop roots is easy when you use apple cider vinegar as a rooting hormone.
In the late winter or early spring, choose a long, flexible stem from the wisteria. Pick a stem that is young, healthy, and covered in buds. While the stem is still connected to the parent plant, you will bury it in several pieces, and each section should include at least one bud that will remain above ground and one that will be buried.
If the soil is particularly compacted, deficient in fertility, or poorly drained, work in about 2 inches of organic matter like compost before layering the wisteria stem there. A few feet from the base of the vine, be careful not to disturb anything deeper than the first few inches of soil or harm the wisteria’s existing roots.
Use a sharp knife to make a shallow incision that is no longer than a few inches long in each piece of the stem that you intend to bury. A minimum of two buds, one of which will remain above ground and the other of which will be buried, are required for each area.
Each broken piece of the wisteria stem should be buried under a few inches of soil and, if necessary, staked into place. Covered and uncovered areas should be alternated. Compound layering, often known as serpentine layering, is this sort of layering.
Once there is a considerable new root system and above-ground development, cut the stem into many parts, each with a root system and above-ground shoots. After beginning the layers, new portions are frequently prepared for separation in the fall or spring.
Transplant each new specimen to a different location in the landscape or into a container with well-drained, healthy soil after carefully digging out each new portion with a sharp spade or pointed shovel to gather as much of each new plant’s root system as possible.
The wisteria’s rate of growth
Nothing compares to the splendor of a wisteria arbor in full bloom, but sadly, many Midwestern gardeners are unable to grow these exquisite vines.
Japanese wisteria (Wisteria floribunda) and Chinese wisteria are the two varieties of wisteria that are most frequently planted in our region ( Wisteria sinensis).
Japanese wisteria is famous for its fragrant violet blooms, which are produced in clusters that range in length from 8 to 20 inches. A cluster’s individual blooms open one at a time, starting at the base.
Chinese wisteria often has clusters that are less than 12 inches long, with slightly larger individual blooms. A cluster of flowers also has a tendency to open at the same time. Chinese wisteria is less fragrant and less resilient than Japanese wisteria. Both species have cultivars that feature white blooms.
Wisteria is an aggressive twining vine that can become highly invasive in some places. Strong support is necessary for the vines to maintain their rapid growth. When wisteria is established in the right setting, it can grow up to 10 feet each year. It functions best in neutral to slightly alkaline, deep, moist, but well-drained soils.
Since the majority of gardeners are attracted to this plant for its flowers, they are very irritated by its infamous propensity to just grow greenery. This irritating issue may be caused by a variety of factors, including the plant’s immaturity, an excess of nitrogen, a deficiency in phosphorus, poor-quality plants, and an excessive amount of shadow.
Before they can start to produce flowers, Asian wisterias need to attain a certain level of maturity. In actuality, it may take the vines up to 15 years or more to bloom.
Those who have had success with wisteria frequently advise root trimming, using superphosphate, severe shoot clipping, and planting in full light. Most importantly, you should begin with high-quality plants that were grown from cuttings of plants that are known to bloom when they are still quite young. Take cuttings of the stem tips in July if you know someone who is prepared to part with a beautiful specimen. Avoid planting seedling vines since it is impossible to predict their flowering habits due to the genetic diversity of seed reproduction.
Wait until late spring or early summer to prune these vines since they develop their blossoms on last year’s wood in mid- to late May. To keep the plant manageable and regenerative, severe pruning back to three or four buds is frequently advised.
A few native species of wisteria are a little more “tame” than their Asian counterparts. These indigenous species attain flowering age earlier than Asian species because they bloom on the growth of the current season. Although they bloom slightly later in the spring, they can rebloom throughout the summer.
The 20–30 foot tall American wisteria (W. frutescens) blooms its flowers in 4-6 inch long, compact clusters. The most popular cultivar, “Amethyst Falls,” has fragrant lavender-blue blooms. Although ‘Nivea’ has longer clusters of white blossoms, it is less aromatic.
Wisteria macrostachys, which grows in Kentucky, produces flower clusters that are 8 to 12 inches long and densely covered with blossoms. Some people believe this to be an American wisteria subspecies. The hardy Minnesota cultivar “Blue Moon” has incredibly fragrant blossoms that start to develop in June and continue throughout the summer. Both ‘Aunt Dee’ and ‘Clara Mack’ have blooms that are a light lavender color.