How To Make A Wisteria Bonsai

Create a new bonsai by taking softwood cuttings from a wisteria plant in the summer. When the temperature is usually above 70 degrees, softwood cuttings root more readily.

How long does wisteria bonsai take to grow?

Many gardeners are eager to care for their tree from its earliest beginnings, even though it can be simpler (and quicker!) to take over the upkeep of an established, mature bonsai. It’s not difficult to grow wisteria bonsai from seeds; all you need to know is how to create the right conditions and a lot of patience.

When cultivated from seeds, bonsai can take anywhere between 10 and 15 years to mature. That indicates that it will take a long time before you are blessed with their lovely blooms. But we assure you that the wait will be worthwhile if you’re patient!

Here are some frequently asked questions for newbies and further information on how to germinate wisteria seeds.

In the mid-Atlantic and Southeastern regions of the United States, Chinese and Japanese wisteria are regarded as invasive plants. Take extra precautions to keep your seeds contained if you’re growing in these areas or you run the danger of hurting the local fauna and plants.

How to Germinate Wisteria Seeds

It takes more than just throwing some seeds in a pot to grow a wisteria bonsai from a seed. The seeds must first be encouraged to germinate or to send out roots. You can determine which seeds are viable by doing this and giving them a small start-up boost.

  • First, gather the seeds from a wisteria plant that is in blossom. If the wisteria seeds are ready to be harvested, shake the pod to check. You’re fine to go if it starts to rattle.
  • Step 2: Not all seeds that have been picked will grow. Place the seeds in a jar of water to test their viability; those that float are likely to sprout.
  • Step 3: Weakening the seed’s exterior can aid in the embryo’s germination when spreading dried seeds. Before planting, think about softly thinning the shell with a file or sharp blade.
  • Step 4: Add moist, soilless seedling mixture to a sizable, shallow pot or multiple individual seedling containers (containers must have drainage holes).
  • Step 5: Spread a thin layer of dirt over the soil, top with the seeds, and water thoroughly. Place in a bright, comfortable area.
  • Step 6: Particularly in their early stages, wisteria plants prefer a damp environment. Keep the soil moist but not waterlogged by checking the moisture levels every day.
  • Step 7: After the wisteria seedlings emerge from the ground, you can transplant them into a shallow container with good drainage to start the bonsai process.

FAQ 1: How do you look after bonsai seedlings?

Before you attain the “bonsai impression,” you still have a lot of work to do after transplanting your seedling to a shallow pot. In order for the delicate wisteria roots to develop as strongly as possible, you must first maintain the soil properly.

The bottom of the pot should have a layer of coarse substrate or coco peat to help with water retention while yet allowing for appropriate airflow. Add regular bonsai potting soil to the remaining space in the pot and cover this layer. Give your bonsai seedling plenty of sunlight after you’ve placed it in this mixture to encourage photosynthesis and fuel new development.

FAQ 2: How often do you water bonsai seedlings?

During their development phases, wisteria bonsai seedlings require a lot of water and prefer to be permanently damp. Water at least once daily, and daily moisture levels should be checked. Your goal is to prevent the soil from drying out and to maintain it moist but not soggy.

You can submerge the bonsai seedling’s container in a shallow tray of water so that it can control its own moisture uptake.

Study more: See our manual What to look for before taking a bath is described in How to Know When to Water Your Bonsai.

FAQ 3: When should I repot my bonsai seedlings?

Late winter, when the plants are fully dormant, is the ideal time to transfer bonsai seedlings. By doing this, the repotting process’ shock and stress are lessened. Because they grow quickly and vigorously, wisteria plants may usually be replanted after just one growing season. You’ll need to repot them once every two years as so as they develop into juvenile trees to provide room for new growth.

Wisteria bonsai blooming time: how long does it take?

Growing Wisteria bonsai is a rewarding experience for gardeners who like flowering trees. This little tree is a scaled-down variation of the blooming shrub that can be found throughout the world, including in China, Japan, and the US. People should be aware of this plant’s needs before choosing it because it does take a lot of care and patience to produce its fragrant blossoms.

The best way to characterize a wisteria tree is with the adjectives “beautiful, dramatic, and a delight to gardeners and onlookers.” This tree has a vine-like quality that expands quickly during the growing season. Its branches have quick, curled growth. Soft, scented veils of blossoms will grow at the tips of these bent branches.

The Wisteria bonsai is the exact opposite of the Wisteria tree; it only grows gracefully in a bonsai pot in a delicate little form. Wisteria bonsai trees can look otherworldly thanks to skilled bonsai cultivation. Depending on the species, the blooms might be blue, lavender, or white and occur early in the spring.

Wisteria trees have larger trunks and tendency to grow in a vine-like manner. The trees develop quickly, and the branches ascend and bend, from which the springtime blooms will dangle. The aromatic blossoms come in blue, lavender, or white hues. Small, green leaves are present.

The tree thrives in either full or partial sunlight. When cultivated outside, it does need protection from severe winds.

When the wisteria tree is growing, especially immediately before and during its flowering cycle, it requires a lot of water. The pot should ideally be placed in a tray of water so that the tree can absorb all the water it requires through its roots. The tray needs to be taken out after the soil’s surface is saturated.

Wisterias consume a lot of food. However, wisteria fixes its own nitrogen from the atmosphere, and an excess of the nutrient will stimulate foliar development at the expense of blossoms, thus the tree should be supplied with a fertilizer that is low in nitrogen. Use a fertilizer designed especially for wisterias, and abide by the feeding recommendations.

The wisteria should at the very least undergo annual fall pruning. Hard pruning should only be done when the tree has no blossoms. Remove any and all shoots that won’t be used as branches. Pruning’s typical goal is to develop or keep up a weeping or cascading habit, which is perfect for showcasing the flowers while they are in bloom. Remove the seed pods as soon as they appear to direct growth toward the flower instead of seed development for more prolific blooms.

Once a year, either in the early spring or the fall, repot young trees. The roots should be extensively trimmed and plucked out. Repotting should be done every two years for more mature trees. Wide, deep pots are excellent for wisterias, and using new soil each time they are repotted can lessen the chance of disease transmission.

Once blooming is complete, wiring to achieve the desired form and style shouldn’t be started.

Wisteria trees need to be at least 10 years old before they begin to blossom. If consumed, the wisteria seed pods and seed are extremely toxic: Be cautious when around kids and animals.

Growing Wisteria bonsai will be quite satisfying for you. Although it will grow quickly, it won’t start to bloom for about ten years. Wisterias are still beautiful and a sight to behold, nevertheless. The following advice will assist you in growing Wisteria bonsai trees.

You may cultivate a healthy, sturdy, and gorgeous Wisteria tree for everyone to appreciate by learning all there is to know about perfecting Wisteria trees and using fundamental bonsai growth methods.

The following are some intriguing details regarding Wisteria bonsai:

1. The plant must grow for at least ten years before it blooms. This little tree won’t bloom until then, but it will have shiny green leaves.

2. The tree requires repotting every two to three years due to its fast growth.

3. Fall is the ideal time to prune wisteria bonsai, but at least once a year is sufficient.

Trunk & Branches

The woody branches of the wisteria bonsai tree grow in a slightly bent form. Additionally bent, the trunk can be divided into one to three pieces. A medium to dark brown bark that is often smooth to the touch covers the branches and trunk of the tree.


A Wisteria bonsai tree’s leaves range in hue from medium to dark green. These leaves have an oval shape, but their ends are somewhat pointed. They can be seen on either side of lengthy strands that have a single leaf growing from the tip. The veins are barely perceptible, and the leaves have a faint shine to them.


The majority of the time, wisteria bonsai trees have lavender blossoms. Nevertheless, they could also occasionally be white, blue, or a mix of hues. The blossoms typically have a drooping appearance but are actually made up of several small petals that are close together.

If planted indoors, they can bloom at any time of the year, but if grown outdoors, they typically bloom in late spring or early summer. If the plant is left outside, the moderately floral scent of the flowers also draws birds and butterflies.


In most cases, a wisteria bonsai grows to a height of one to two feet. If left unchecked, it might go bigger than this, so it’s crucial to prune the plant. This specimen can grow to be about 18 inches in circumference.

Each leaf on the strand is roughly 2 inches long, and the leaf strands typically reach a length of around 14 inches. The length of the blooms can range from 12 to 14 inches.


A Wisteria bonsai tree also produced pods in addition to blooms. These slender, long, flat pods resemble pea pods in certain ways. They contain tiny seeds that resemble beans in appearance.

Another Wisteria bonsai tree can be grown from these seeds by transplanting them. The plant needs to be kept away from kids and animals because both the seeds and the pods are harmful.

Can I grow a tree out of my wisteria?

Gurney’s resident horticulturist, Felix, demonstrates how to cultivate wisteria vines into a tree shape. Find out how to support and train the vines correctly to build a sturdy foundation for a beautiful tree design.

Felix from Gurney’s is here, and I’m standing next to a wisteria tree. All wisteria varieties can be trained to grow into trees, and when you buy them, the majority of tree varieties are already trained to grow into longer chutes with branches at the top. So, typically, they measure between three and three and a half feet. You’ll obtain something that is tall, trained on a piece of bamboo to a single cane, and then has a branching top to it. However, it’s crucial to train these canes early on so that they mature to the point where they can support themselves. What we have here is a younger form of that. If you have a stake into it, such as a piece of conduit or larger bamboo, you can train these canes along. I think we should give this one, maybe two or three more years, and then we can take this T post out and our trellising are mounting mechanism off, and this is just an indication. We’ve actually trained two of them intertwining two varieties, so we can get two colors here on one tree form, and when this matures it’ll be kind of nice, because these two canes here, these two vine portions, your vines, not canes, excuse me, but they’re intert When you train these into a tree form and remove the support, they look beautiful, as I’ll soon demonstrate to you here. In the meantime, let’s go look at an older specimen. We walked over and are now in our research garden. We moved this specimen across, and as you can see, we have a pretty excellent trunk and only an older initial thing that began off being around pencil thickness. This specimen has been in this location for just over ten years. And that’s what you get when you get them in the mail: a pencil that was sent to you already sharpened, which is what we have in front of us. You can see that these came out and make a really wonderful framework here for this tree wisteria at about 18 inches or maybe 24 inches off the ground where we actually let it branch. Although they are twisting and incredibly beautiful, they do require some annual pruning. The buds are gorgeously swelling, as you can see. This wisteria tree is going to put on a really nice show this year, and it just adds some real beauty to the landscape. If you have a tree-type wisteria, you can really impress people with it when you know that it has only been trained and grown for a few years, giving you a nice strong trunk on your to support your vine, everyone. So, a month has passed since the last video segment on this wisteria. You can clearly see how stunning it is when in full bloom. The students simply adore running in to the base here and standing underneath this wisteria tree when we have school tours here at the research facility. Just keep in mind that when you acquire your wisteria vine, you may train it just into this true shape. You may shape that vine into a tree trunk using merely a piece of conduit or something similar, let it grow, and finally remove the training device to create a stunning wisteria tree in your yard. We appreciate having you with us at Gurney’s.

Wisteria can it be grown inside?

The wisteria, or Wisteria sinensis, is distinguished by its gorgeous, long-stemmed violet, blue, or white blossoms. The U.S. Department of Agriculture plant hardiness zones 6 through 8 are ideal for growing this pea family vine. Keep a fresh wisteria plant you’ve produced or bought indoors until spring, when you can put it outside, if it’s still too chilly outside to do so. Wisteria plants are renowned for being a robust, quickly-growing plant that thrives readily in the correct conditions, making caring for them indoors rather simple.

Mix peat moss with potting soil that won’t dry out quickly in a planter. Create a hole in the middle, then insert the plant. Around the plant’s base, compact the soil firmly before covering it with wood chips to retain moisture.

Put the plant in a location that gets plenty of direct sunshine within your house. Wisterias thrive in areas with some humidity, so make sure the area where you put the plant isn’t too dry. Keep the pot away from furnaces, heating vents, and other extremely dry areas of your house.

The wisteria plant should be placed on a stool or another high surface so that the vines can grow down the pot’s side. If you intend to replant the wisteria vine outside, it is recommended to grow the vine straight down even though it grows best on trellises or wire frames.

Pruning the wisteria vine will prevent it from becoming too big to be moved easily outside. Wisteria vines expand quickly, but trimming them will keep them under control. When new shoots begin to dangle too far over the side of the container, prune them back with pruning shears.