Where To Cut Tradescantia Nanouk

  • To encourage new development, pinch or trim your plant by cutting the stem just above the leaf and node. In other words, the node and leaf will stay attached to the plant.
  • Just below the node, cut the stem to allow for plant propagation. This means that the portion you cut off should have the node.

Knowing the locations of nodes is crucial since they are the sources of new development, such as branches, leaves, roots, and other parts of the plant. The nodes are seen in the shot below as ridges with lines running up the stem.

Where can I find Tradescantia to cut?

The simplest approach to grow new plants without purchasing more at the nursery is by using inch plant cuttings. Use a sharp, clean pair of shears or a knife to make cuttings. The ideal length for cuttings is 3 to 4 inches (7.6 to 10 cm).

You can plant your cuttings in a container with regular potting soil once they develop roots. Place it where it will receive moderate to strong light and temperatures between 55 and 75 degrees Fahrenheit (13-24 C).

How is a Tradescantia nanouk cutting taken?

Because Tradescantia nanouk grows rapidly, you might need to regularly cut or repot it. Why not spread some pieces while doing so? Propagation of Tradescantia nanouk is remarkably simple. It closely resembles Tradescantia zebrina (wandering dude). Here is how to go about it.

Tradescantia nanouk propagation by division

You’ll frequently see that a tradescantia nanouk you purchase has a few distinctly different stems in the soil. even more compact ones I divided mine because it had so many stems! Simply carefully remove the plant from its pot and divide it at the roots to accomplish this. If you need to rip a few roots, don’t worry.

Then, using well-draining soil, plant each in a separate tiny pot. Don’t worry if it doesn’t seem too happy with you for the first couple of weeks. Some plants experience some shock after being divided and replanted.

Tradescantia nanouk propagation by stem

Tradescantia nanouk can also be propagated via stem clippings. This is a wonderful strategy to use if you accidently knock a branch off while trimming your nanouk. I’ve used this method of propagation with purple queen, and it works exactly the same way.

Take a few-inch-long slice of a nanouk stem and remove the bottom leaves to propagate it in water. Place a glass of water inside, being careful to keep the top foliage from submerging. You’ll be able to plant it after you have a strong set of branch fresh roots after a few weeks!

Take the same kind of cutting if you want to propagate nanouk stems without the water-rooting process. Take out the lower leaves. After that, plant the cuttings in a soil that drains well. To help maintain the soil just moist enough, water a little more frequently than you would a typical plant.

This encourages root expansion. Pull back on your water until you can lightly tug on the cuttings but still encounter some resistance. New roots have emerged. Yay.

You can frequently get away with simply clipping a few stems and placing them immediately back into the pot your existing plant resides in because soil propagation is so simple. This encourages a large, bushy plant with new development!

Should my Tradescantia be trimmed?

Tradescantia, which get their name from their tendency to grow in a vine, require regular trimming to keep their attractive, bushy appearance. A quarter of the plant should be pinched back, according to Gardening Know How “Promote branching and amplify fullness.

A particular reminder: After about a year or so, Tradescantia usually start to become dry and lanky, regardless of how carefully you take care of them. However, because they are so simple to grow, they can be kept indefinitely “planting cuttings will get things beginning.

How should Tradescantia be pruned?

The best way to prune Tradescantia is to “pinch off stems immediately after a node.” This can be accomplished by cutting or actually pinching with a pair of clean scissors. You must keep the node attached to the limb you are trimming. As mentioned, the remaining node will sprout two stems.

If you decide to cut the stem with scissors, make the cut at a 45-degree angle, similar to how florists cut flower stems. If you don’t do this, the branch won’t secrete any liquid, leaving your plant susceptible to pests and disease.

How come my Tradescantia nanouk is so lanky?

Even a novice plant parent can easily take care of their Tradescantia Nanouk. Follow our instructions on how to take care of your Tradescantia Nanouk, from the need for sunlight to typical issues and their fixes.


Giving your Tradescantia Nanouk bright, indirect sunlight or full sun is the first thing we recommend doing to take care of it because doing so promotes more bloom output.

The color of your Tradescantia Nanouk’s leaves may be fading because to inadequate sunlight, which is a common problem.

Solution: Set up your Tradescantia Nanouk in a steamy shower or close to a sunny window. Your Tradescantia Nanouk will grow leggy if it doesn’t receive enough light. Additionally, the leaves will be slightly smaller, with more green and less variegation.


Watering your Tradescantia Nanouk when the top inch of soil is dry comes next on our list of things to do to take care of it. Usually, once every week is plenty. Additionally, it relies on the kind of lighting your plant is exposed to. The soil must be moist, however excessive moisture should be avoided as this might cause root rot.

Frequently Occurring Issue: Too much water may be the cause of your Tradescantia Nanouk’s drab and sickly appearance.

Giving the plant too much water is one of the most frequent errors made by novices or new plant parents. Only water your Tradescantia Nanouk once every week. Keep the soil damp but not drenched.

Use distilled water or a water filter system instead of tap water because some houseplants can be sensitive to salts in it. If this isn’t possible, overnight storage of the water in an open container is advised.

Humidity & Temperature

Put your Tradescantia Nanouk in a room with a little bit more humidity to add to our list of things to take care of it because it thrives in a humid climate. If you wish to enhance the humidity, we advise misting it frequently, putting it close to a humidifier, or using a pebble tray.

The ideal temperature range for Tradescantia Nanouk is between 75°F and 55°F during the day and at night.


We also recommend feeding your Tradescantia Nanouk once or twice a month using fertilizer for houseplants that has been diluted to half the recommended concentration. Overfertilization should be avoided because it can cause dark leaf tips. Before adding fertilizer, make sure the soil is moist.

To prevent fertilizer burn or plant burn, it’s crucial to apply the fertilizer according to the recommended timing and amount.

Pests & Other Problems

The biggest issue with Tradescantia Nanouk is overwatering, which can result in fungus gnat problems as well as fungal infections and root rot. Always check to see if the ground is wet. If so, wait until the soil is totally dry before watering it once more.

We also advise cutting off any decaying or damaged stems and leaves. The opposite is also true; if you let your Tradescantia Nanouk become too dry, it can draw spider mites. Increasing humidity and keeping a proper watering schedule are recommended.

Give your Tradescantia Nanouk a thorough shower with fresh water if it has a spider mite infestation. After that, spritz it with a 50/50 isopropyl alcohol and water solution. To eradicate all spider mites and their eggs, repeat the misting multiple times.

The maintenance of your Tradescantia Nanouk is now complete. Consider adding a Tradescantia Nanouk to your collection if you’re seeking for a new plant. It’s a hardy, attractive plant that looks fantastic in your living room or home office.

Expand your knowledge of plants. For additional information on various houseplants and advice on how to keep your plants alive and healthy, visit our blog on plant care.

How long does it take for nanouk to spread?

Nanouk, also known as Tradescantia albiflora ‘Nanouk,’ is a striking houseplant. The fluffy leaves are striped in vivid pink and green.

This patented cultivar, which was initially created in the Netherlands, is currently a popular among people who enjoy houseplants.

How are nanouks spread? Three simple techniques can be used to propagate nanouk: stem cuttings in water, stem cuttings in soil, or by dividing the plant. The quickest approach is usually to root cuttings in water; roots will usually appear in a week. The soil approach may require two to four weeks for rooting.

When it is full and bushy, Tradescantia ‘Nanouk’ appears even more magnificent. By growing many plants and putting them all in one pot, this is readily accomplished.

Once you have all the knowledge you require from this essay, you will be able to propagate an unlimited number of these lovely creatures.

How may a new plant be started from a cutting?

Hello! Thank you for coming! I’m going to demonstrate how to root plant cuttings in water for you today. This is a fantastic approach to increase the number of your plants and spread your love of plants to friends. I will admit that it can be challenging to give away a plant that you have nurtured from the very beginning. But seeing improvements is so exciting and satisfying! I recently donated two cuttings of Chain of Hearts to households that are really fantastic. I’m eager to follow their development.

I used to work at a golf course with a 30 foot Monstera deliciosa when I was in my early 20s. 30 feet—you read that right! I developed a liking for flora because of that. If you didn’t already know, it’s actually my all-time favorite plant. Regardless, some of the leaves were 2 feet broad and breathtaking! One day, I noticed a tiny leaf emerge from the ground, and when no one was watching, I removed the dirt from the stem’s bright green color and pulled the leaf out. I kept checking behind me as if I were ready to commit a bank heist or something. Actually, I suppose that it was theft. But that’s not how I saw it. I was sharing the good vibes! But let’s be really clear: IF YOU DO IT AT A STORE, IT IS STEALING, so don’t do that! My supervisor finally heard me out (it was weighing heavily on my conscience), and he laughed, called me silly, and said it was absolutely fine! All of this to say, I brought it home, planted it in water, and it grew, making me very pleased! I was in awe of this incredible replication technique. Let’s discuss how to water-root plant cuttings.

The majority of common house plants can be propagated using water. Currently, I’m focusing on a tiny little stem from my large Fiddle Leaf Fig. There are no roots yet, but there is a small leaf of green!! Try it if you’re not sure.

Let’s get started

  • Choose the spot on the main plant where you will cut your cutting. Finding the root node on your plant is important since not all cuttings that will root in water have them, but the majority of them do.
  • Make a clean, precise cut immediately below the node with a knife or pair of scissors. 1/4 or so below the node.
  • Set the cutting inside a spotless glass. Pour enough room-temperature water over the cutting nodes to cover them.
  • Every 3-5 days, replace the water with brand-new, room-temperature water.
  • Keep an eye on your roots as they expand! Depending on the plant, this could take weeks or even months.
  • When your roots are around 3-5 inches long, it’s time to plant the cutting in soil!

Need a visual? Watch my propagation tips on AM Northwest.

Your rooted plants should be placed in a location with strong indirect light. Additionally, you’ll need patience—serious patience! It’s not necessarily bad news if you are attempting a fresh cutting and two weeks pass without any roots. Someone I know submerged a fiddle leaf fig leaf in water, and three months later, she noticed roots.

Make careful to clean and lightly rub the roots with your fingertips after changing the water. Before putting the roots in the fresh water, you should wipe off any mucky film (that’s the precise phrase).

You only have to do that! It’s really easy. You can now create your own plants and exchange them with pals. It’s one of my favorite activities. Check out my post on How to Repot a Houseplant when you’re ready to pot your rooted plant. Even though you won’t be repotting, there are some useful suggestions for potting in general. Many thanks for stopping by! See you again soon!

Does Tradescantia nanouk enjoy being rooted?

Perlite and chunky orchid bark improve the soil’s ability to breathe, making it loose and airy. Potting soil offers a rich organic medium from which your plant can take nutrients.


There is no requirement for fertilizer if the potting mix mentioned above is used. Your plant will receive enough nutrients from the potting soil. It’s important to note that your plant is a light feeder on its own.


It is recommended to repot your plant whenever you notice the indicators that it is getting too small for its pot because the Tradescantia Nanouk doesn’t like to have its roots bound.

Generally speaking, this occurs once a year. If your plant needs to be repotted, though, you should be able to tell. These indications:

  • Your plant appears to be constantly thirsty and unable to receive adequate water.
  • Growth is far slower than typical.
  • accumulation of mineral salts on the topsoil
  • roots that are visible through the drainage hole
  • Plant roots that are encircling the pot or are raising it

When repotting, use new soil to restore the soil’s nutrients. After repotting, water evenly.