Why Is My Swiss Cheese Plant Dripping Water

As I mentioned, your Monstera deliciosa uses the nutrients delivered by the xylem sap to support its big leaves and stems.

The next time your Swiss cheese plant has moist leaves, you’ll know that one of two plant processes—guttation or transpiration—is taking place.

The Process of Guttation

Have you ever gotten out of bed early in the morning and strolled across your lawn? Yes, there was dew on the grass. Similar results are obtained by guttation, however xylem sap rather than dew is released by the Swiss cheese plant.

Numerous vascular plants, including grasses and the Monstera deliciosa, exhibit guttation.

As the sun sets, these plants’ stomata, or plant pores, will close. In a moment, I’ll go into more detail on transpiration, which is prevented as a result.

If the soil where your Swiss cheese plant is growing is wet, water will naturally seep down to the roots of the plant. The water potential from the soil to the roots varies, though.

What is water potential, you ask?

The term “water potential” describes the energy that water may have. The volume in relation to pure water is used to determine its size.

In comparison to the soil, the roots of your Swiss cheese plant have a reduced water potential. As a result, the water collects and moderate pressure is created around the roots.

The plant starts leaking fluid through water glands called hydathodes when the root pressure rises.

Not all plants have hydathodes, which are only found on a species’ leaf tips or edge structures.

The xylem sap appears as droplets that rest on the leaves of your Swiss cheese plant as the hydathodes discharge the sap fluid.

The following are two instances where you could notice the most guttation in your Monstera deliciosa:

  • If you keep your home or workplace, where your plant is housed, at a high relative humidity level.
  • when it’s too dark for your Monstera deliciosa to grow, for example.

The Process of Transpiration

Even though I’ve already written on transpiration, I want to go into great detail now to help you better understand how your indoor plants behave.

Water or other liquids, such as xylem sap, cross your houseplant through transpiration to get to the flowers, stems, and leaves.

Why is it necessary to travel by water at all? Your plants don’t need every last drop of water, even if you give them the recommended amount. Actually, your plant doesn’t really need much.

You can see how little water your plant needs when you consider that it occasionally releases 99.5% of the water it contains.

A word of caution: The information above does not imply that you should stop watering your plant as frequently as you do. You don’t want to dehydrate them because that could interfere with guttation and transpiration.

During transpiration, the stomata or pores on the leaves are used once more, but this time they open as opposed to closing like they do during guttation. Carbon dioxide diffuses when stomata open, which is essential for photosynthesis.

It seems logical that transpiration doesn’t happen at night because sunlight is necessary for photosynthesizing as well.

Your plants need to transpire for a variety of reasons in addition to helping with photosynthesis.

For example, transpiration delivers mineral nutrients to the shoots of your plant. Transpiration can control the osmotic pressure in the cells of plants, whether it is higher or lower.

What is osmotic pressure?

The amount of force applied to a solution to prevent a pure solvent’s inward flow from passing through a semipermeable membrane is known as osmotic pressure.

Species of indoor plants, like the Swiss cheese plant, will alter the size of their stomatal apertures to control the transpiration rate. Transpiration will happen more frequently if the stomata are more open than if the pores are less open.

Keep in mind that if the stomata close, as they do at night, transpiration cannot occur at all.

Our Advice:

When a plant absorbs more water from the roots than it can use or lose through the leaves, a natural process known as guttation takes place. If this keeps happening, cells at the edge of the leaf could split open and die, leaving a brown edge. Cut back on irrigation. It is said to help to add a tiny bit of bleach to the water.

Why are there water stains on my Monstera plant?

Guttation, often known as “sweating,” “weeping,” or “crying,” is a completely natural occurrence when liquid droplets develop on the tips or surface of healthy leaves. Although the droplets appear to be made of water, they are actually made of xylem sap, a mixture of extra water and minerals.

Although xylem sap is non-toxic and won’t damage your furniture or flooring, it can become very filthy if larger plants start gutting and dripping.

There are many causes of guttation. The majority of the time, it indicates that your plant has a little bit more water than it requires and manages to get rid of the extra. During the night, when plants often stop transpiring, root pressure will force moisture, chemicals, sugars, and other substances upward through a network of tiny channels known as the phloem. These tubes are attached to tiny cells that are located on the leaf’s surface. On the tips of your plant’s leaves, they expel the extra water and minerals, creating what resembles dewdrops or perspiration.

It’s also critical to understand that guttation and transpiration are two different processes. Transpiration is the process through which moisture or water leaves the plant as a vapor while it is hot outside. On the other hand, guttation is xylem sap that the plant itself secretes.

Some claim that stress or less-than-ideal growth conditions can also lead to guttation. There are numerous ways to stress out your Monstera, even if you are doing everything you can to ensure a happy plant. This includes a change in temperature, the size of the soil or pot, or even just the drive home from the plant nursery.

Some plants are more adept at adjusting to a new environment than others, and your Monstera may try to control its developing environment by gutting or leaking leaves.

How come my plant is crying?

Guttation is the process by which leaves lose water as a liquid phase through unique cells called hydathodes.

These “guttation tears” include different salts, sugars, and other organic materials and develop near the leaf margins or tips.

Additionally, the guttation process might result in the entry of undesirable microorganisms that can result in plant disease issues. Some leaf shines and cleaners might clog the hydathodes and result in browning tips.

When I see a drop of water, I frequently wonder if it would damage my carpet, floor, or other surfaces.

You should always wipe up any water droplets left over after guttation because you never know what the salts and sugars contain that can cause them to get stained.

Hopefully we haven’t gotten too technical, but guttation of plants is a normal occurrence.

How can I tell whether my Monstera is content?

How can you prevent your Monstera from drowning? We’ve discussed a little bit about how to avoid overwatering it. Once you get to know your Monstera and understand all of its behaviors, you’ll notice lots of indicators that it needs water. Some of them may not come as a surprise because the indications that a Monstera needs watering are also quite similar to those that other plants exhibit.

Your Monstera’s Soil Is Dry

The primary indication that a Monstera needs watering is dry soil. A Monstera deliciosa shouldn’t thrive in arid conditions, despite the fact that it’s vital to allow the soil dry up a little bit between waterings. Although too-dry soil won’t immediately kill a plant, it will hinder its capacity to grow effectively.

Since every plant and indoor environment is unique and can necessitate a different amount of time between waterings, routinely testing the soil will enable you to determine when your Monstera needs to be watered. Using your finger is the simplest method for doing this!

If the soil is dry after sticking your finger in it for about an inch, water the plant. Don’t water your Monstera just yet if it’s moist or still wet.

Your Monstera is Leaning Over

Although it is an unusual indicator, I have observed a leaning Monstera in my collection. An underwatered Monstera will begin to sag in a manner that causes the leaves to droop, which is similar to wilting. On a little Monstera, this is much simpler to see, although it can be seen on bigger plants as well.

Always examine the soil before watering because leaning plants might occasionally be an indication of a different problem, such as overwatering. Never add more water when the earth is damp; dry soil indicates that it is time to water.

Your Monstera should bounce back within a few days after receiving a thorough watering if the cause of drooping is too little water. As much stress as possible should be avoided allowing the Monstera to become this dry as it will stunt the plant’s growth.

Your Monstera’s Leaves are Curling

Leaf curling is just another sign that a Monstera needs watering. The leaves of a Monstera that needs water will start to curl inward, making them appear smaller and less wide.

This is a temporary problem that almost always goes away with some time and some good watering! If the soil is dry, check it and give it a nice, thorough watering. Within a few days, the leaves ought to resume their regular state.

If they don’t, there might be another problem going on. Before watering once more, take some time to run a diagnostic.

Your Monstera’s Leaves are Brown, Yellow, or Dead

An alarming sign may be the yellowing of your Monstera’s leaves. Dark green, waxy leaves are present on a healthy, happy Monstera (though younger plants or new leaves may be lighter green).

Some discoloration is expected because older Monstera leaves gradually turn yellow and drop off as they become older. However, you have an issue if you notice many sections of the plant with yellow, brown, or dead leaves or new leaves.

In addition to underwatering, additional issues that might cause leaf discoloration include overwatering, excessive or insufficient sunshine, or parasites. Don’t water the plant right away; instead, take the time to inspect it for any signs of these issues.

Although older growth will occasionally die off, you should take immediate action if any leaf loss is accompanied by other symptoms like drooping or discolouration. The soil’s moisture content should always be checked as the initial step. Water the soil deeply if it is dry. Look for indications that your plant may have been overwatered if the soil is wet.

Your Monstera Isn’t Putting Out Fenestrated Leaves

With mature Monsteras that haven’t started fenestrating or that produce leaves with holes in them, a lack of fenestration can become a problem. Fenestrations are almost always a sign that the plant is not receiving enough light.

This can occasionally be brought on by inadequate sunlight. Examine the surroundings of the plant to rule that out. Monsteras require six to twelve hours per day of bright indirect sunlight. Try transplanting the plant to a brighter location if it isn’t receiving this much light.

Set a smart alarm to remind you to inspect the soil if lighting isn’t the issue and you think your Monstera needs extra water. This will assist you in forming the practice of routine plant maintenance. You can establish the ideal watering balance by making sure the soil is moist enough many times per week. Be careful not to overwater, though!

How can overwatered monstera be fixed?

If the monstera delicosa or adansonii has not experienced serious root rot, it may be feasible to revive it. The most crucial step is to remove excess water from the soil and allow plenty of time for your pots to dry.

If you want to restore our plant to optimal health, you may need to take into account the potential consequences of overwatering a monstera.

Here’s how to save a monstera that’s been overwatered:

Withhold watering and drain the potting soil

It’s important to wait to water your plant until you’re certain that the extra water has been drained.

At least twice a week, give your Monstera adansonii some water (depending on the climate in your area). Make sure the top layer of the potting has dried out completely before providing water to your plant (about 1-2 inches).

Check for root rot indicators

A negative effect of overwatering is root rot. Drooping leaves, a bad smell, and the sight of dark brown spots inside your plant’s roots are a few of the typical signs of root rot.

In order to stop the infection from spreading to other sections of the plant, it is essential to replace the potting soil and remove any rotting roots. To help inhibit the spread of disease, use a fungicide (and eradicate the fungi from your soil).

Make sure you stick to your watering schedule, and check on the health of your plant frequently.

Change potting medium

By altering the potting medium, you can prevent waterlogging, root rot, and other consequences of over watering. In addition, monstera are often enormous plants that may occasionally need to have their growing containers changed to allow a growth in size.

A potting mix of well-moisturized, well-drained soils with a relative pH range of 5.5-6.5 is ideal for growing monstera. Additionally, you can choose to mix pine bark fines with peat moss in a 1:4 ratio.

Selecting the best potting medium enables you to regulate temperature and water retention while also giving your plant a secure foundation.

Change the growing container

Selecting the right growth container for your monstera adansonii or delicosa is essential. When choosing a high-quality pot, you may need to take the plant’s size into account as well as drainage options and the pot’s material. The spacing on either side of a healthy growing pot should be about one and a half inches.

Before adding any potting material, always make sure your roots fit within the pot securely. While some monstera plants have aerial roots that may cling to the surface, the majority of them will fit inside the container.

Additionally, it’s a good idea to pick a pot with drainage holes so that excess water can run off. Another choice is double potting, which might be advantageous if you have growing containers that don’t fit inside your home.