Why Is My Monstera Not Fenestrating

My neighborhood grocery store is where I got my first Monstera deliciosa. Although it was a small plant, I didn’t mind because I was so happy to have found it. I brought it home and couldn’t wait for the day when it would grow enormous leaves with all of their distinctive splits and slits. I waited and waited, but the plant still had little leaves with no fenestration. I then began to question if Monsteras divided in all cases. What may I do to aid in fenestrating it? I dug around till I found the solution.

If your Monstera’s leaves aren’t splitting, it usually comes down to two things: how old the plant is and how much sunlight it receives. Unripe Monsteras won’t fenestrate until they are roughly three years old. Monsteras may also be unable to produce fenestrations if there is insufficient sunlight.

If you don’t know much about Monsteras, you probably have never heard of fenestration. I’ll go over all there is to know about fenestrations in this essay. I’ll discuss their proposed use, when to look for them to emerge, and how to induce fenestration in your Monstera leaves.

Why don’t some leaves on Monstera split?

The rate of leaf fenestration increases with plant age. If a mature Monstera is not splitting, attention is not being given to the plant to the same extent as it would in its natural environment. Monstera may fail to split as a result of inadequate lighting, poor soil drainage, and inadequate dietary requirements.

In Monstera, how do you obtain fenestration?

The evergreen tropical vines or shrubs known as monsteras are indigenous to Central America. They are one of just a few aroids that yield edible fruit, especially M. deliciosa, and they are a member of the aroid family Araceae. They hardly ever bloom or bear edible fruit inside, though.

The Monstera may be recognized as the “a Swiss cheese factory The moniker comes from the monstera plant’s well-known natural leaf holes. The scientific name for plants that produce holes or distinct areas in their leaves is “leaf fenestration is a common phenomenon not just in monsteras. Other reasons why plants like Haworthias and Lithops have acquired leaf fenestrations include the fact that these plants’ translucent leaf tips help them survive when covered by the periodic sand and dust storms that are native to their native South Africa.

How and why monsteras make leaf holes is a topic of discussion and conjecture. Some people have hypothesized that Monsteras make holes in their leaves to withstand hurricane winds. Plants that produce bird of paradise break their leaves to let wind through as well. Others claim that they have openings that make it easier for water to reach their roots. Since they are epiphytic and do not have much touch with the earth as they grow, this is true.

You could say that the “hole theories” are flawed.

The evidence is insufficient to warrant a complete adaption. The majority of tropical plants, if not all of them, would have the same or related adaptations if the adaptation was to withstand hurricane winds. As an alternative, many tropical plants have full leaves that don’t easily snap. There is no necessity, even though the holes may allow water to reach the roots more freely. Tropical rainforests with almost daily rainfall are home to monsteras. The roots will eventually receive enough water. Why else would Monsteras make holes if it weren’t for the wind, the water, or both?

According to Christopher Muir at Indiana University, the reason why Monsteras have evolved holes is because of the lighting circumstances. This is the prevailing hypothesis at the moment. Monsteras develop in a semi-epiphytic manner from the forest floor, climbing trees and other structures to gain access to more light. Understory plants in these types of woods can only survive by catching sunflecks, or tiny sunshine beams, that penetrate the canopy. The same amount of leaf can cover a larger area by altering the leaf structure to include holes. Because more area is covered, there is a higher chance of catching a sunfleck even though some may fall through the perforations and be missed.

A complete leaf and a fenestrated leaf will perform similarly under excellent lighting conditions. The fenestrated leaf does receive more sunlight than an unfenestrated leaf when there are scattered bright sunflecks and understory circumstances. This is useful, though, only if the plant’s rate of growth calls for it. It becomes advantageous to make the most of all the sunflecks because more mature monsteras develop faster.

Now that we are aware of the function of holes, or at the very least the why, let’s learn how to enable fenestration in your monstera. The distinctive feature of a holey leaf should be sought out. Just let it develop. With time and growth, monsteras develop fenestrated leaves. The shape of the plant’s leaves varies as it ages, just like other aroids. When Monsteras are young, their leaves resemble those of other aroid plants, including the Philodendron’s heart-shaped green leaves. Fenestration, which refers to the beginning of new leaves that have holes, starts when Monsteras reach a height of around three feet. Trimming off the older, smaller leaves that grow from the base encourages the plant to generate larger leaves and makes fenestration easier, according to our research. Give it a go!

Why lack slits on my Monstera?

Why are there no holes in my monster leaves? Young leaves typically lack cuts. When mature leaves are devoid of fenestration, it may be a sign that there is insufficient light, too little moisture, nutrition, or air temperature. Young leaves don’t have cuts; older leaves eventually develop them.

How do you induce leaf splitting in Monstera?

With all the fenestrations they have previously created, monstera leaves unroll. An already split leaf cannot develop further splits. As a result, if you notice cracks or tears in a Monstera leaf, they are probably structural damage rather than the beginnings of a split leaf. Additionally, if the humidity is too low, leaves may occasionally split as they unfold (see our humidity guide). What to do with damaged Monstera leaves is also described here.

The faster your monstera develops, the sooner it will get fenestrated leaves. Creating the ideal growing environment is the best method to promote this. The following things can be made better if your Monstera leaves haven’t split yet:

  • Light Your houseplants will develop more quickly if you increase the amount of light they receive. Bright light will cause your Monstera to split more quickly. See our guide to the best grow lights for Monstera.
  • Water
  • Your Monstera will grow if the right amount of water is provided. Your plants become thirsty with rapid growth! View the irrigation manual here.
  • Fertilizer If you want your Monstera to grow quickly, make sure it has the nutrients it requires. Read more about the fertilizers we advise using on your Monstera plant.
  • Support
  • The leaves will split more quickly if you give your Monstera a support—say, a moss pole—and allow it to climb. How to put supports next to your Monstera, with more information on supports.

This moss pole is a great tool for your Monstera’s growth. To make a taller pole, they can be stacked! To view the current pricing, click the image or link.

Why won’t the leaves on my Monstera unfold?

The glossy, fenestrated Monstera leaves are perfect for bringing a little piece of outdoors indoors. A completely unfolded leaf can reach a height of three magnificent feet, depending on how well it is taken care of.

That’s why it’s so frustrating to notice that your Monstera leaves aren’t unfolding completely or are taking a while to do so. What is happening here?

  • By spraying often, humidity can be raised.
  • the use of a humidifier
  • a pan of humidified water with pebbles

If the Monstera’s overall growth rate is slowed, look for insect infestation. On the other side, inadequate light, nutrients, or watering may be to blame.

Option 1: Wait

Depending on how young and little your monstera plant is, you might just need to give it some time.

Young monsteras almost resemble a distinct plant because of their sturdy, heart-shaped leaves. Your monstera should grow and finally form those lovely holes and splits on its own when it is between two and three years old with adequate light, the proper quantity of water, and a little fertilizer. Be tolerant!

Option 2: More light!

This is typically the most crucial thing you can do to encourage your monstera leaves to split. However, without plenty of bright, indirect sunlight, monsteras won’t grow much or produce many splits (or numerous rows of splits), even though they can survive in reduced light. Your monstera leaves might not split even if you follow all other instructions to the letter without the proper light.

If you buy a mature monstera with split leaves, lower light may work, especially if you don’t want it to grow much bigger and take over your house (since monsteras often do!).

However, you’ll need good lighting if you have a young plant that you want to observe develop and flourish. The best windows are those that face east or south, while north can still be used. Just be extremely careful around windows that face west since they often receive a lot of direct, scorching afternoon light that might burn the leaves.

Don’t worry if your home lacks excellent illumination. A grow light can always be used as a supplement. To replace greenhouse-style lights that you may get from nurseries, you can either purchase ready-made grow lights or install grow bulbs in standard light fixtures.

Are fenestrations present on all Monsteras?

The short answer to this is categorically no. A Monstera planted from seed that has just produced a few new growth sprigs won’t develop fenestrations for a very long time, maybe closer to three years. Fenestrations almost always emerge in older plants.

Additionally, not every leaf will emerge with fenestrations, even in an older plant. For some plant owners, this is a major source of annoyance and might be worrying. However, a lack of fenestrations isn’t always cause for concern.

You should investigate the issue if you’ve noticed that your older Monstera isn’t producing any fenestrations. If a Monstera doesn’t have enough light, it frequently won’t fenestrate. The problem may be very simple to spot since there are many additional symptoms that go along with this.

Why lacks holes in my Swiss cheese plant?

According to study by a US scientist, the plants’ well-known hole-riddled leaves enable them to collect sunlight more frequently, helping them to live in dark rainforests.

According to the BBC Nature, they are typically grown as house plants but can also be found in the wild from southern Mexico to Colombia.

One is that by allowing the wind to pass through, the holes in the leaves help the plants withstand hurricane gusts. Another benefit is that they enable better temperature control or water to reach the roots of the plants.

Some have hypothesized that the holes conceal the plants from herbivores in some way.

Christopher Muir’s research at the University of Indiana in Bloomington, US, led to the hypothesis that the holes are a result of the plants’ adaptation to their rainforest environment.

Monstera deliciosa, a species of Swiss cheese plant, resides in the gloomy tropical rainforest understory. In order to photosynthesise for energy, it depends on collecting erratic shafts of sunlight known as “sunflecks.”

Muir compared leaves with and without holes using mathematical models because he doubted that the sunflecks could account for the peculiar leaf forms.

He discovered that the same amount of sunlight has an equal positive impact on both leaf forms.

A leaf with holes will miss some sunlight because it filters through them, but solid leaves with the same surface area actually occupy less space, which limits their availability to sunshine.

According to Muir’s simulations, a leaf with the same surface area but numerous holes would come into touch with sunlight more frequently since it occupies more space.

He proposed that by maintaining this consistency, the changing leaf form becomes more dependable, reducing stress on the plant and increasing its chances of survival.

However, Muir asserts that immature Swiss cheese plants don’t require holes in their leaves.

At different times during its life cycle, the monstera deliciosa grows in a different way. It is an epiphyte, sometimes known as an air plant.

Young plants are located closer to the forest floor, where sunlight penetration is lower. Muir predicted that because the light in this area is of poor quality, holes do not help the plant.

The plant only becomes higher as it ages, reaching areas of the understorey with more sunflecks.

The leaves then get bigger, get holes, and are held away from the trunk so they have a greater chance of getting the sunshine they need to thrive.

How long do Monstera leaves take to unfold?

Your monstera houseplant may take anywhere from 1 to 7 weeks to completely unfold.

Depending on how old the leaf is and what sort of monstera plant it is, it may unfold more quickly under ideal conditions and with correct monstera care, possibly in less than a week. A monstera leaf’s time to unfold depends on a number of variables, including humidity, watering frequency, sunshine exposure, pest activity, age, and nutrient content.

Monstera leaf unfurling time lapse

Watch the monstera leaf unfold in this time-lapse film in less than a week! Don’t be discouraged if yours doesn’t unfold as swiftly as hers, even though it’s feasible. Each monstera plant is unique.

I want them all, whether they are monstera deliciosa, monstera adansonii, or even monstera obliqua!

This article contains affiliate links, so please be aware of it. I receive compensation on qualifying purchases as an Amazon Associate.