You should plan on giving your Monstera cutting around 6 weeks before planting it in soil so that roots can form.
In order to guarantee a strong root system has established for a better chance of survival, I often advise waiting at least 2-3 months.
However, as long as you change the water frequently, clean the roots, and transfer the cutting into a larger jar as it grows, a Monstera can survive in water for many months (if not years).
It is prepared to be put in soil when a lovely cluster of roots fills your container.
You can plant your Monstera cutting as long as it has five roots that are at least several inches long.
Keep the Roots Clean
Keep an eye on the roots as they grow every week, and don’t be hesitant to cut off any sections that seem unhealthy.
You can clip out roots that appear to be rotting as long as there are numerous healthy-looking roots (white, yellow, light green, and light brown).
These are typically distinguished from the others by being dark, mushy, or significantly more slimy.
When after propagation can I plant Monstera?
After 3-5 weeks, the roots from your cuttings should start to grow. The new roots should be at least an inch long; this is the primary thing you want to check for. Your cutting is prepared to be planted into a pot once it develops several roots that size.
When should I plant Monstera seedlings in soil?
You followed our advice on propagation first, and now you want to know when to plant your new Monstera. Wait until the longest, whitest, fuzzy roots may branch off into numerous, smaller roots. It is appropriate to bury your Monstera cutting in soil once these little feeder roots have grown to at least 3 inches (8 cm) in length.
Comparing the root volume to the size of the pot you want to put it in will help you determine when your cutting is ready to be planted. For instance, when the root volume of a small Monstera, such as an adansonii, could fit in a 2 inch (5 cm) container, the cutting might be planted (alone or with other cuttings).
I often wait until the roots of a Monstera deliciosa, which has stronger roots, can fill a 3.5 inch (9 cm) pot. I wait till the roots of an albo variegated Monstera deliciosa can fill a 4.5 inch (11 cm) pot. When an albo Monstera cutting is planted, the chance of leaf loss from transplant shock is reduced because the cutting has more roots.
How long does it take for a Monstera cutting to root?
The length of aerial root that is available determines how long it will take a Monstera cutting to root. Additionally, it depends on whether the aerial root was expanding actively prior to the cutting.
Usually, short aerial roots grow into a single, long new root. Longer aerial roots have the ability to begin producing new roots from both the sides and the tip, hastening the rooting process. Without aerial roots, monstera cuttings must develop a new root from within the stem, which takes more time.
A Monstera deliciosa cutting with aerial roots that are actively growing ought to take root quite rapidly. The color and texture of the aerial root can be used to determine its age. It is new if it is flexible and white, light brown, or green in color. It will take a lot longer to begin producing new roots if it is stiff, dark in color, and has a lot of bark flaking off.
The aerial root typically transforms into a white, fluffy true root after a few weeks. The process of delaying feeder roots then requires a few more weeks. From the time the first fuzzy white root appears until your Monstera cutting is prepared for planting, allow a minimum of six weeks.
When a monstera root is in contact with a surface, feeder roots form more quickly. Try to use a short container while growing plants in water so that the root tip will immediately contact the bottom. The root will continue to grow without branching if the water is too deep.
I’ve had success using LiquiDirt to induce quicker root growth once roots have begun to emerge.
Switching straight from water to soil
Once your Monstera has enough roots to make the shift from its propagation medium to soil, remove it. For your roots, the switch from water to soil propagation is a significant one. This transition is more difficult than moving from moss or perlite to soil for propagation.
When you plant a Monstera cutting in soil, part of the roots may dry up or die if there aren’t enough of them. The “water roots” do not have as much fuzzy root hair to absorb water because they are accustomed to being constantly moist. They need some time to develop more fuzz so that they can absorb water from the earth.
Assume that up to one-third of the roots of your Monstera cutting will be harmed or die. You need to make sure that the new plant will be able to survive on the remaining roots.
You won’t harm your Monstera plant if its propagation media has too many roots growing in it. The nutrients in the soil and the microbiome of helpful bacteria that support soil roots are the major things you are losing out on. Your cutting will grow more quickly if you place it in soil.
I make an effort to take too many roots too lightly. I want to ensure that my cuttings survive the switch, even if they develop a little bit more slowly in the interim.
Switching to another medium before soil
Switching from water to soil is fine for low-cost plants. Try using perlite or moss instead of soil for pricey albo Monstera cuttings or any plant you want to be particularly cautious with.
Start propagating in water and continue doing so until your cutting starts to root. After that, while the roots are developing, swap to wet perlite or moss. In a firm medium, roots will branch out more and develop more fuzz. As a result, the plant’s roots are already prepared to absorb water from the soil, which lessens stress during the transition to soil.
Can Monstera live in water forever?
Your Monstera can be kept in water or some alternative media if you don’t want to plant it in soil. While water is sufficient on its own for proliferation, fertilizer is required to keep your Monstera in water over the long term.
Growing Monstera with Hydroponics
You must supply nutrients to the water when growing plants hydroponically for the growth to continue. There are three stages to permanently submerge your Monstera.
First, make frequent water changes. To prevent the growth of mold or algae, rinse the roots and maintain the container tidy.
A N-P-K fertilizer made specifically for hydroponics, like Dyna-Gro Foliage-Pro 9-3-6, should be used next. A nutrition solution is made of of water and fertilizer. To view the most recent pricing on Amazon, click the image or link.
Can you immediately plant a Monstera cutting?
Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.
Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.
When may you plant a plant that was propagated?
The cutting is prepared for potting when the roots are at least 1-2 inches long. This plant is ready to be transplanted into a pot with potting soil because it has dense roots.
How long does it take for the roots of a Monstera plant to form?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
How should a propagated plant be planted?
The simplest method for growing plants with stems at the base.
- Plant should be taken out of container.
- Use a knife or your fingers to cut the plant into smaller pieces.
- Verify the roots of each division.
- In appropriate containers, replant.
Can you submerge aerial roots of Monstera in water?
I’ve seen several sources advise you to put a bowl of water in the planter for your Monster deliciosa and trail its aerial roots in there. According to the theory, this is because aerial roots may actually absorb moisture. However, submerging them in water nonstop won’t likely accomplish much more than cause them to deteriorate and perhaps put your plant in risk.
However, you can frequently spray the aerial roots of your Monstera. Again, there is no scientific evidence that this makes a significant difference, but it won’t hurt. In addition, since these tropical plants prefer their surroundings to be moist, make sure the air humidity is not too low.
Please feel free to leave a comment below if you have any additional queries regarding Monstera aerial roots or if you would want to discuss your own interactions with these magnificent tropical houseplants.
What can you do with air roots from Monstera?
A gentle, damp cloth or a fast shower with lukewarm water can be used to clean your monstera’s leaves, especially the oldest ones on the plant, to eliminate any dust accumulation.
Only two fertilizer applications will be required for your monstera throughout the entire year: one in early spring and one in late summer.
Your monstera plant will eventually develop aerial roots from its stem. These aerial roots are there to support the plant; do not cut them off. If any aerial roots are too short to support a climbing plant, train them back into the soil to absorb more nutrients when they are long enough.
How are cuttings planted in soil?
You’ve made the decision to try propagating in order to step up your plant parenting skills. Welcome! You’ve arrived to the correct place. Increase your plant collection or spread the word about your favorite plants to friends by using propagation. It’s also a terrific method to discover more about certain plant species and carry out your own experiments involving plants.
The possibility exists that this propagation lesson will pave the way for you to build a complete propagation station in your home. You might not be able to stop once you realize how simple it is to breed new plants from your old ones!
Although there are several methods for propagating indoor plants, in this post we’ll concentrate on the stem cutting technique. The finest plants for this technique are climbing ones like philodendrons, pothos, and monsteras.
Choose your rooting medium
Decide whether you want to root your cuttings in water or soil first. You’ll notice that method in our illustrations because we advise using water if this is your first time growing a plant. The main advantage of rooting in water is that it is simpler to monitor development as roots form.
Rooting plants in potting soil is enjoyable to try for experienced plant propagators. You can avoid the transplant trauma of moving the cutting from water to soil by roots it directly into potting soil. We include instructions for roots in soil at the bottom of this page if you’re interested in the latter method.
Gather your supplies
If you want to try your hand at stem cutting propagation, you’ll need a few simple tools. What we suggest is as follows:
- a razor-sharp cutting instrument, like snips or pruning scissors
- Rub alcohol with
- hormone for roots (optional)
- A glass tube or vase and fresh water are needed for water roots.
- A small pot with drainage and fresh potting soil is needed for soil rooting.
Get to know your plant
It’s time to get to know the plant you’ll be pruning from, often known as the “mother plant.” You must cut a section of the stem that has at least one node in order to take a stem cutting. A node is a tiny raised bump that normally sits next to a leaf and is where new roots will begin to emerge.
Cut the vine immediately below the node you’ve discovered after rubbing alcohol has been used to sanitize your scissors (this prevents bacteria from spreading that could harm your plant). If at all feasible, make sure to include 1-2 nodes as well as anywhere from 2-4 leaves.
Optional: Before putting your cutting in water, dab the end of it with rooting hormone. Although it is not necessary, rooting hormone will hasten the process of germination.
Rooting in water
Add new water to your propagation jar before adding the clipping. Wait until the roots lengthen to about 1-3 inches and develop in a warm, sunny environment away from direct sunlight. Be patient; it can take days, weeks, or even months to complete this. Plant your cutting in fresh soil in a container once roots have formed, then water normally.
Rooting in soil
the aforementioned trimming instructions. Your planter should be around 75 percent filled of new dirt. Make a few-inch-deep depression with your finger. After inserting the cutting into the depression you created, top over the container with extra soil. To secure the cuttings, compact the soil around them. You should water your cuttings thoroughly until the soil is evenly saturated. You must make sure the pot you select has a drainage hole. Your cuttings risk getting overly damp and starting to decompose before they can properly root if water cannot escape.
Pro tip: to encourage development, give your recently planted cuttings a boost in humidity. To assist maintain humidity, place a large glass jar, cloche, or plastic freezer bag over your pot.
If everything goes as planned, you ought to have brand-new roots in a few weeks. Send us pictures of your plant reproduction! Put a hashtag on Instagram and show us those roots!