It’s time to start chopping once you have your tools and have determined which leaves and stems need to be pruned. As closely as you can to the “parent branch,” make a clean cut through the leaf and the stem that connects it. Avoid nicking or cutting the parent branch as this can cause infection.
Keep pruning until any diseased or ugly leaves, as well as any leaves you have clipped to promote new growth or reduce plant size, have been eliminated. Always remember to cut quickly and precisely to prevent creating jagged edges, and never use a sawing action.
Should my Monstera adansonii be pruned?
While it is acceptable to remove dead or dying leaves at any time, it is best to prune your Swiss cheese plant in the spring if you intend to make significant cuts. Like many other types of indoor plants, Monstera adansonii hibernates over the winter.
This is crucial to take into account because even the most meticulous trimming results in some plant stress. Plants may become weaker and less able to recover from injury if clipped during their dormant period. You can give your Monstera adansonii plant months to heal by cutting it in the spring, at the beginning of the growing season.
Why prune if doing so puts the plant at risk? By eliminating food-producing leaves and stems that aid in respiration, pruning can cause a plant to become stressed, but it also serves to move energy away from stale growth and onto young, healthy limbs. Additionally, there are several advantageous reasons to prune a plant, which will ultimately make your Monstera healthier.
How should my Monstera be trimmed?
Fortunately, trimming a monstera is not too difficult. Since they are a hardy plant, they don’t need to be meticulously pruned. In other words, even if you don’t perform a great job, your plant will probably be alright.
You’ll want to remember a few things, though:
1. Put on gloves. When pruning or propagating your monstera, be sure to use protective gloves because the sap is poisonous and can cause severe skin irritation.
2. Use a tidy, sharp instrument. You can avoid crushing or damaging the stem by using sharp pruning shears or a knife to make the cut. Your plant is also shielded from hazardous microorganisms by clean tools. Bacterial diseases can even spread to your other plants and are difficult to treat. (Protect your monstera from insects, fungi, and bacteria with our Houseplant Leaf Armor!)
Instead of slicing the stem off, just give it a good snip or chop while cutting. The cleanest cut will be made as a result.
3. If you can, prune in the spring, especially if you want to promote growth. Growth spurts occur in the spring and summer for the majority of plants, including monstera. Pruning in the spring will yield the best benefits and hasten the recovery of your plant. You should prune in the spring because that is when your cuttings will grow the fastest if you intend to propagate them.
4. Arrange the slices. Starting at the base of the stem, remove any outdated or diseased leaves.
Cut where you want the plant to grow if you are pruning to promote growth. Make a top cut if you want it to grow higher.
When the time comes to actually trim your monstera, keep in mind that pruning promotes growth so choose where to make your cuts. You can safely reduce the plant’s size if you’re pruning to manage your monstera’s size. Just remember that it will eventually need to be done again because it will grow back.
5. Be sure to cut below a node if you’re propagating. Don’t be concerned if you’re only trimming to reduce the size of your plant or get rid of dead leaves. However, if you want to grow your cuttings from them, make sure that they have a node, which is a tiny knob that develops on the stem opposite a leaf. When your cutting begins to grow, these will subsequently develop into aerial roots!
Try our new Houseplant Propagation Promoter!
6. Prevent unintentional proliferation. When you’re done pruning, be careful to dispose of your cuttings in the trash if you’re not going to propagate them because if you place them in a compost pile or somewhere else where they can root in the earth, they’ll start to grow roots.
I’m done now! Don’t be afraid to prune your monstera; it’s an essential yet easy component of care for this plant. This plant develops rapidly and bounces back quickly from pruning. Good fortune!
How can one increase the bushiness of Monstera adansonii?
You must provide it with something to climb. The most typical alternative to moss poles is a wooden or metal trellis, although other options include bamboo stakes, bits of wood or bark, metal or wooden trellises, and topiary forms. Or, like I did, you may make your own trellis!
You need a support strategy, such as the ones mentioned above, and something to fasten the stems to. The support you select and the desired aesthetic will both affect how you train it. I want to climb on half of mine and trail on the other.
To secure it to the support, use twine, string, or a tie of some sort. It doesn’t cling on on its own. You might be able to weave it in and out to achieve the desired look, but I’ve always found that adding one or two ties—or even more—allows the stems to face and develop in the desired directions.
There were just two long stems left on my Swiss Cheese Vine at this point. One more will be trained to climb the trellis, and the others will trail.
Pruning is used to achieve this. Tip trimming will work to maintain your plant bushy if you start doing it sooner. You can propagate it using the stem cutting method in water or a light soil mixture and replant it if it is too lanky.
No, although a lot of people do, particularly when using a Monstera delicosa. You might use a less “robust choice” like I did because the Monstera adansonii stems are significantly thinner.
Within the next few months, you’ll receive a care post on this lovely, quickly expanding plant. And now that you know how to train a Monstera adansonii, you can do so!
What makes my Adansonii so lanky?
Like all plants, a Monstera deliciosa can become sparse and lanky from a lack of sunshine. The issue itself is simple to identify, but how can you put a stop to it? How do you mend a Monstera that is “leggy” and what does that mean?
When a Monstera doesn’t receive enough light, it becomes leggy and becomes elongated and sparse. Once a leggy Monstera has been identified, it can be treated by cutting back the leggy growth and making sure the plant continues to receive enough sunshine going ahead.
It can be frightening whenever your plant starts to appear less than healthy. Leggy, fortunately, is a simple problem to resolve. So don’t be afraid! Continue reading to learn what the issue is, how to resolve it, what kind of light a Monstera requires, and how to accommodate Monsteras in low-light conditions.
How should a Swiss cheese plant be trimmed?
Seeds, stem cuttings, or suckers can all be used to multiply the Swiss cheese vine plant, though cuttings and suckers are the more typical methods.
It is simple to take Swiss cheese plant cuttings if you are wondering how to do it. Simply take stem cuttings, leaving a portion of the stem attached, by cutting immediately after a leaf node, for this Swiss cheese plant multiplication. Trim the first leaf from the cutting’s base, then put the node in the ground. If you want to, you can apply rooting hormone, but it’s not required. Water thoroughly and let the water drain away. Ideally, you might wish to root the cutting in water first, then transfer it to a pot once rooting has sufficiently started. The Swiss cheese vine cutting should be rooted in water for two to three weeks before being transplanted to a container with nutrient-rich potting soil.
Additionally, you can grow Swiss cheese plants by wrapping wet moss around the stem at a tiny aerial root and leaf axil and securing it with twine. Place this area into a transparent bag and secure the top (adding a few small air vents). The Swiss cheese vine plant should start to grow new roots in a few months.
Does Monstera adansonii’s foliage grow back?
If you or a boisterous pet or youngster inadvertently knocked over your prized plant, damaging the leaves and stems, and you’re wondering, “Will My Monstera Leaves Grow Back?,” you’re in luck: The plant will probably be fine.
The majority of broken or snapped leaves and stems can be repaired by monsteras because of their high resilience. Re-support your plant and carry on with your usual maintenance. The plant will soon start producing fresh, robust growth if you give it a few weeks.
But if it takes some time for your plant to get back to normal, don’t panic. Monsteras can temporarily stop growing upward to concentrate on expanding their root system when they are under any kind of stress. Be tolerant. You’ll get new leaves.
How can a Monstera be made bushier?
As long as it’s actively developing, monstera deliciosa can be easily propagated at any time of the year. They make excellent propagation candidates because of how quickly they develop, making it possible to give them to friends or add more plants to your home. There are various ways to spread monstera. This is how:
How to Propagate Your Monstera Plant via Leaf Bud Cuttings
Step 1: Fill a container with fresh all-purpose potting soil large enough to handle three or four cuttings.
Step 2: Take a healthy monstera stem from the mother plant and cut a piece off with a clean, sharp blade. Pick a section of the stem with several leaves.
Step 3: Separate that stem into a number of leaf-containing pieces. Aerial roots may also be affixed to segments.
Step 4: Insert three or four stem segments into a single pot. In the new container, this will produce a bushy, full appearance. Before planting, the stem segments can also be propagated in water for a few weeks. The junction between the leaf and stem is where new growth will appear.
Where do I cut the Monstera stem from?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
Should your Monstera be trimmed?
Does your Monstera plant require any maintenance? Since monsteras are notorious for growing quickly, regular pruning is required to maintain them looking their best.
Use clean, sharp shears to trim any overgrown or withering leaves that are below the Monstera node. Early spring, when your Monstera starts its growing season, is the ideal time to prune it.