How To Transfer Monstera From Water To Soil

You must transfer your cutting from the propagation media to soil after it is prepared. So that everything is ready to go, choose a pot and prepare your soil mixture beforehand.

Removing propagation medium

The propagation media should first be removed as much as you can without harming the roots. As a result, it will be simpler to plant your Monstera cutting because the roots will be free to assume the shape of their new container. Additionally, it guarantees they’ll have access to their new soil mixture.

It’s simple to remove the cutting for water. Work the roots gently free of additional materials, such as perlite or moss, and then allow the extra material fall off.

Because the root hairs of some plants, like moss, adhere to the medium, this can be a little tricky. Here are a few advices:

  • Take the cutting out of its container, then submerge the roots with some water. The roots will release loose debris, which will float to the surface.
  • First, separate the roots from the tips. To prevent breaking it, start at the tip of each root and work your way backward, untangling it a little at a time.
  • When utilizing moss, pick a long-fibered kind of sphagnum moss of superior quality. This will enable you to remove it from the roots without breaking, pulling it loose in long chunks.
  • Be tolerant! With time, even the most difficult root knot will unravel. Start with the simpler areas and return to the more challenging ones once the root ball has loosened.

Maintaining moisture at the cutting’s roots is crucial during the transition. The plant won’t be able to absorb water as well if the roots dry out since the root hairs will die. Roots that have been damaged or dried out can decay very fast. Leave the cutting submerged in water if you need to take a break from removing the roots to keep the roots moist.

Planting a Monstera cutting

Add one to two inches (2.55 cm) of your potting mix to the pot’s bottom. Place the cutting in the pot while holding it in the desired sitting position. After that, cover the roots completely with soil mix, leaving about 1 inch (2.5 cm) of space at the top of the container to prevent soil from spilling.

Avoid packing the soil mixture tightly around the roots. If there are any air spaces, gently poke the dirt there with a chopstick. By doing this, you can re-distribute the dirt without compacting it around the roots using the chopstick’s tip.

How deep to plant a monstera cutting

It is best to keep the stem and nodes of your Monstera above the earth, just like when you are spreading it. This enables you to keep a closer check on the stem and helps prevent stem rot.

Sometimes the plant won’t be able to stand erect without burying some of the stem, depending on the shape of your roots and your cutting. It’s acceptable in this instance; just watch out for overwatering. To ensure that I can still see a buried stem even though it is hidden, I like to place the cut end of the stem next to the edge of my clear pot.

Watering a newly planted Monstera cutting

Make sure to water a Monstera cutting as soon as you plant it! Keep in mind that during the transition we want the roots to stay wet. Water until all of the soil is moist and droplets appear in the drainage holes in the bottom of your pot.

It’s crucial to water your cutting again after planting. Keep a tight check on your new plant, and don’t wait until the soil is completely dry before giving it some additional water. Your Monstera needs a continually wet atmosphere as it adjusts. This is crucial if you wish to plant a Monstera cutting directly into the ground.

You can begin introducing the plant to a regular watering regimen after the second treatment. If you are using a clear container, check the soil for fresh root growth to make sure your plant is healthy and doing well in its new environment.

For the best Amazon items for caring for your Monstera plants, go here. To save you time, we investigated the items, read through the reviews, and even tested them. Our own Monstera (Deliciosa, Adansonii, and Albo Variegata) plants use these identical items, and Instagram users love them!

How should a plant cutting be moved from water to soil?

To get the cutting off on the proper foot, use top-notch potting soil! PRO-MIX Premium Moisture Potting Mix is something I really enjoy using. It is perfect for container gardening, potting, and repotting young plants and seeds. Perlite encourages healthy root growth and aeration, while the peat base aids in moisture retention. Mycorrhizae, which PRO-MIX also contains, strengthens roots and produces plants with healthier, larger, and more fruitful growth. Undoubtedly advantageous when transplanting!

  • Prepare the soil in your new pot. Put a layer of dirt in the bottom of the pot that is between one and two inches thick.
  • After removing the rooted cutting from the water, thoroughly rinse it with new water.
  • Put the clipping in the pot and add soil to the roots. Leave the top of the pot with about an inch of space.
  • Add any preventative insect control measures right away.
  • Till water begins to flow through the drainage hole, thoroughly water the plant.

Can Monstera remain submerged in water indefinitely?

Monstera plants, for example, can live in water indefinitely; just make sure to change the water if it becomes cloudy, and you may occasionally top it up with diluted hydroponic fertilizer to replace the nutrients it would normally get from soil. Additionally, see water propagation and succulent water propagation.

Can Monstera be grown from seed directly in the ground?

Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.

It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.

People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.

How is propagated Monstera moved?

Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.

Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.

How long before planting Monstera should the roots be?

The new roots should be at least an inch long; this is the primary thing you want to check for. Your cutting is prepared to be planted into a pot once it develops several roots that size.

How much time does a cutting need to root in soil?

The optimal period to take cuttings is typically from spring through summer, but this depends on the type of plant. For instance, you can cut herbaceous (annuals and perennials) plants at any time of the growing season, and the cuttings should emerge within a few weeks.

However, you must remove woody plants when there are no frosts, which is from early fall when the trees lose their leaves until late January. Remember that you should only pick hardwood cuttings from dormant trees and plants, which are in the state of not having leaves. It takes these hardwood cuttings around a few months to sprout.

Additionally, you can take softwood cuttings from a tree or shrub’s new growth in the spring and early summer. These stems are green and supple. By the fall, these ought should sprout.

How long does it take for a cutting to root?

A cutting typically takes 3 to 4 weeks to take root, however this might vary depending on the type of plant and whether you are propagating in soil or water. For instance, hardwood cuttings planted in potting soil in the early autumn will be ready for transplanting in the spring.

How do you promote the roots of cuttings?

The optimal rooting conditions must be offered to cuttings in order to encourage root growth. For instance, the temperature should be between 70 and 80 F. (2126 C). Be sure to keep cuttings away from harsh sunshine and chilly drafts. Cuttings shouldn’t be overwatered at any cost.

Do you need rooting hormone for cuttings?

Although it is not necessary, rooting hormone boosts the success rate of rooting, particularly for woody plants like roses and shrubs. Two varieties of rooting hormone exist:

  • capsules of hormone It is the simplest method to use. It contains indole-3-butyric acid, the active component (IBA). It is a plant hormone from the auxin family that encourages the development of roots. Use rooting hormone powder after moistening the stem and stirring in the powder. Cut away any excess, then bury your cuttings.
  • Indole-3-butyric acid is the active component of gel hormone, which is similar to the powdered alternative. Once the stem has been dipped in gel, the cut is sealed, and the cutting is prepared for planting.

Which is preferable for Monstera propagation—soil or water?

Even while Monstera cuttings are generally fairly tolerant of the growing medium, location, and conditions, there are still a few things you may change to boost your chances of success or hasten your progress.

Time of year

It is not necessary to timing when you take a cutting, but keep in mind that winter, when plants are often dormant, may cause your cutting to start more slowly.

Time frame

The first thing to stress is the importance of patience. Some cuttings will immediately take root and quickly produce new leaves. Others may experience a protracted period of inactivity. Spring will frequently revive cuttings that had been dormant.

The best way to determine if your cutting is still in good shape while doing nothing is described below.

Light and warmth

Monstera cuttings thrive in warmth and light, and they will grow the quickest on a warm, sunny windowsill. It has been said that Monstera cuttings should be started with a heat pad, but in my experience, that is not true. A heat pad, however, could perhaps hasten the growth process.


If they are in soil, they must also be maintained gently damp but not wet—wet feet are bad for them and will cause them to decay. Once a week, check their soil and, if it feels dry, give it a little water. It is not necessary to place a plastic bag over them, as is occasionally advised.

Size of cutting

More nodes and longer or larger stem sections tend to produce more new growth, including several new stems. Given that Monstera is a vine plant with a single long stem, this is significant. If your cutting produces leaf sprouts on several nodes, each of these will grow into a stem, resulting in bushier growth at a small size.

Growing medium

The benefit of propagating in water in a glass jar is that any new growth is visible right away. However, it is usually advisable to plant larger cuttings directly in the ground if they have leaves and aerial roots.

Water choice

You can use conventional tap water, but if it’s particularly hard, use caution and avoid using water that has been artificially softened. Both rainwater and distilled water are acceptable. If you submerge the majority of the stem part in water, leaves and roots will grow rather happily.

Soil mix

Use a light, freely draining potting compost when young plants and a more hummus-rich mixture as they mature.

Planting stems vertically with just the top inch above the soil is the simplest and most space-efficient approach to pot cuttings in soil.

I was concerned that for new leaves to grow, some stem nodes would need to be above the surface, but that wasn’t the case at all. Under the soil surface, new leaves began to emerge and easily pushed their way to the surface to spread out.

Potting up

If you have many stem cuttings that are housed in the same pot, you should separate them as soon as new growth appears. My own experiences indicate that, if handled correctly, Monstera are fairly resilient and don’t mind being disturbed.

You can bury the entire original stem cutting for a neater appearance rather than having to leave any of it above the soil line.

How much time can Monstera grow in water?

You should plan on giving your Monstera cutting around 6 weeks before planting it in soil so that roots can form.

In order to guarantee a strong root system has established for a better chance of survival, I often advise waiting at least 2-3 months.

However, as long as you change the water frequently, clean the roots, and transfer the cutting into a larger jar as it grows, a Monstera can survive in water for many months (if not years).

It is prepared to be put in soil when a lovely cluster of roots fills your container.

You can plant your Monstera cutting as long as it has five roots that are at least several inches long.

Keep the Roots Clean

Keep an eye on the roots as they grow every week, and don’t be hesitant to cut off any sections that seem unhealthy.

You can clip out roots that appear to be rotting as long as there are numerous healthy-looking roots (white, yellow, light green, and light brown).

These are typically distinguished from the others by being dark, mushy, or significantly more slimy.