How To Save Monstera From Root Rot

You won’t be able to repot your Monstera as usual if, after cutting back the roots, you discover that it no longer has any healthy roots. You will now need to assist it in developing new roots by propagating stem fragments.

Cut off any rotted Monsteraroots, stems, leaves, or other portions of the plant that have been impacted by root rot first.

Do you still have any stems with leaf nodes? If so, fantastic! Your Monstera is still alive.

Planting Monstera stem cuttings as though you were repotting them or growing them in water are the two primary methods of propagation.

Simply follow steps 4 and 5 above to propagate them in soil. Till the infant Monstera begins to form roots, keep it out of direct sunlight. Giving it a gentle tug will allow you to determine whether it has roots yet.

Put the Monstera stem in a glass or vase of fresh water to facilitate water propagation. To keep the water clean, change it every few days. You can repot it as in Step 4 after the plant begins to grow roots.

Is root rot reversible in monstera?

The crucial step is this one. The only way to stop root rot is to fully remove it. Once you replant your Monstera in the ground, any sick tissue that is still there is likely to spread further.

You should clean your shears or scissors in between cuts, just like you did when trimming the leaves. When feasible, make a single, clean cut through each root to remove it. Your Monstera will have a tougher time healing ragged edges.

The only issue left is how much should be removed. Recall how before we advised you to use caution? So now is the time to be brutal.

Can you save a plant that has root rot?

You must decide whether the plant may be rescued after root rot has been diagnosed. It is too late to preserve the plant if the entire root system is already mushy. Replanting the plant in new soil with proper drainage will help restore the plant’s health if it has any healthy, white, firm roots.

Clean the roots of the plants gently under running water and trim all brown, mushy roots with a pair of sharp scissors to prepare them for replanting. Just above the injured area, cut the healthy root. Work fast to replant in a short period of time. To prevent the spread of fungi to other plants or soil, sanitise the pruning shears with a solution of 1 part bleach to 3 parts water4 after all the roots have been cut down.

If left untreated, root rot will cause plants to die. Gardeners frequently don’t become aware of the issue until it has advanced because the earliest signs of root rot appear beneath the soil. Take action right once to fix the issue if plants start to exhibit signs of root rot, such as yellow leaves or slowed growth1.

The most vulnerable plants to root rot are those in soils that are too compact for water to drain out effectively or in containers with insufficient drainage holes. Garden plants are not immune to root rot, although container plants are most at danger. By adopting measures to enhance soil drainage prior to planting, the majority of garden root rot problems can be avoided. 2 While it may appear that too much water is the source of the problem, the truth is that too much water creates the ideal environment for the true culprit: fungus.

What does a monstera’s root rot look like?

The first place you’ll see root rot in a monstera plant is in the leaves. Because the bottom leaves are the first to absorb extra water and any fungus or bacteria that has infected the roots, you’ll notice dark brown to black blotches on them.

Additionally, you’ll probably find mushy, stinky roots if you take your monstera out of the pot together with moist soil. Yuck!

How may an overwatered monstera be saved?

If the monstera delicosa or adansonii has not experienced serious root rot, it may be feasible to revive it. The most crucial step is to remove excess water from the soil and allow plenty of time for your pots to dry.

If you want to restore our plant to optimal health, you may need to take into account the potential consequences of overwatering a monstera.

Here’s how to save a monstera that’s been overwatered:

Withhold watering and drain the potting soil

It’s important to wait to water your plant until you’re certain that the extra water has been drained.

At least twice a week, give your Monstera adansonii some water (depending on the climate in your area). Make sure the top layer of the potting has dried out completely before providing water to your plant (about 1-2 inches).

Check for root rot indicators

A negative effect of overwatering is root rot. Drooping leaves, a bad smell, and the sight of dark brown spots inside your plant’s roots are a few of the typical signs of root rot.

In order to stop the infection from spreading to other sections of the plant, it is essential to replace the potting soil and remove any rotting roots. To help inhibit the spread of disease, use a fungicide (and eradicate the fungi from your soil).

Make sure you stick to your watering schedule, and check on the health of your plant frequently.

Change potting medium

By altering the potting medium, you can prevent waterlogging, root rot, and other consequences of over watering. In addition, monstera are often enormous plants that may occasionally need to have their growing containers changed to allow a growth in size.

A potting mix of well-moisturized, well-drained soils with a relative pH range of 5.5-6.5 is ideal for growing monstera. Additionally, you can choose to mix pine bark fines with peat moss in a 1:4 ratio.

Selecting the best potting medium enables you to regulate temperature and water retention while also giving your plant a secure foundation.

Change the growing container

Selecting the right growth container for your monstera adansonii or delicosa is essential. When choosing a high-quality pot, you may need to take the plant’s size into account as well as drainage options and the pot’s material. The spacing on either side of a healthy growing pot should be about one and a half inches.

Before adding any potting material, always make sure your roots fit within the pot securely. While some monstera plants have aerial roots that may cling to the surface, the majority of them will fit inside the container.

Additionally, it’s a good idea to pick a pot with drainage holes so that excess water can run off. Another choice is double potting, which might be advantageous if you have growing containers that don’t fit inside your home.

How is a Monstera brought back to life?

  • Reduce the amount of fertiliser you use. Although it is recommended to use fertiliser, avoid adding any more while the plant is wilting. Once the top inch of the soil feels fairly dry (after about a week or two), water your monstera with a nice bath under the facet (or tap) to help dissolve extra salts that can build up due to fertiliser. This should also help to rehydrate the monstera’s droopy leaves.
  • Always give monstera a good soak, allowing any extra water to drip out the bottom of the pot. Give the monstera a good watering to ensure that the soil is evenly moist because drooping leaves are one of the first symptoms of drought stress. However, if the monstera’s soil is already moist, do not water because doing so could promote root rot, which would explain the plant’s drooping leaves.
  • Place your monstera in a location with strong, indirect lighting. Too much shade might result in drooping leaves and stems, while full light is too intense for leaves that are sensitive to the sun. The monstera should come back to life if you put it in a room with direct light that is bright, simulating natural lighting.
  • Make sure the temperature is between 60 and 85 degrees. Extreme heat makes the leaves lose more water, which makes them droop, and low temperatures stress the monstera, which can also make the plant droop. To mimic the temperatures in the monstera’s natural environment, keep it away from sources of indoor heat or air conditioning.
  • By frequently spraying the leaves, you can raise the humidity. When the monstera has suffered from drought-related stress, spraying the leaves helps the plant recover by reducing water loss. In order to reach the ideal level of humidity for your monstera to revive, either spritz the plant frequently or buy a plant humidifier. Monstera typically prefer around 30 percent humidity.
  • In between waterings, let the top inch of the soil dry out. If the soil is persistently damp, overwatering rather than underwatering is to blame for your monstera’s drooping. Before watering again, let the top inch or so of soil dry off. As monsteras need good drainage, make sure the monstera pot has drainage holes in the base and empty saucers and trays beneath the pot frequently to prevent water from pooling there.
  • After repotting, give the monstera a good drink and check that the potting soil is well-draining. Any plant that has been replanted may have experienced considerable root damage, which temporarily impairs its capacity to adequately absorb moisture. After repotting, thoroughly moisten the potting soil to help reduce any drought stress that might have caused the leaves to droop. For monstera, use a light, well-draining potting soil. To improve drainage and mimic the soil conditions that monstera are suited to in their natural habitat, I personally enrich the potting soil with succulent and cactus soil or orchid potting mix.
  • After transplanting your plant, recreate the natural environment for monsteras to rejuvenate drooping leaves. Your monstera should come back to life once it adjusts to its new environment if you give it plenty of bright indirect light, a regular watering schedule (typically once every seven days), increase the humidity by misting the leaves frequently, keep it away from heat sources, and avoid air conditioning.
  • To protect your monstera from drooping and to keep it growing upright, use a bamboo support. Ideally, get a particular monstera support, which is generally wrapped in moss to replicate the growing circumstances of the monstera’s native environment. Monsteras tend to climb and can droop over without support. Naturally, the monster develops upward while clinging to the support.

Root Rot

Fusarium Root Rot: Fusarium is a widespread soil fungus that has several species. It can cause rotting symptoms in plants on the roots or stems, particularly if there is a cut or other lesion. Overwatering and oversaturating roots can cause fusarium fungi to quickly overgrow since they can also take over dead or dying tissues.

Pythium Root Rot: Pythium is a parasitic bacterial organism that feeds on decaying plant materials, making it a great candidate to transform overwatering into a serious case of root rot. This bacteria can be spread from plant to plant by fungus gnats, which are covered in our blog post on common houseplant pests.

Fiddle Leaf Fig Root Rot may be caused by Pythium or Fusarium, particularly in inactive climates with excessive watering. Without the help of fungi or bacteria, overwatering can also result in root rot. The roots of your plant will start to rot if they are left in excessive moisture without drying out, and even after the soil has dried, healthy roots may get infected.

How to Identify Root Rot: Since the roots are unable to adequately absorb moisture and nutrients, withering and discoloured leaves are an external indicator that something is wrong with the roots. The roots will be fragile and spongy and appear dark brown or black.

In order to effectively treat root rot, you must act soon after spotting its symptoms. You will also need fresh potting soil, bleach, sanitised scissors or shears, and a fungicide from your neighbourhood nursery or garden centre.

Break the soil from the root ball and remove the plant from the pot. To remove the soil, wash the plant roots under running water.

Your plant’s leaves should be pruned back. Although it’s sad, fewer foliage means the new, smaller root system won’t have to work as hard and will have more time to develop. Trim the foliage back at roughly the same rate as you did the roots; for example, if you only had to remove 1/3 of the roots, only need to remove 1/3 of the foliage.

Soft Rot

A bacterial ailment known as Erwinia Soft Rot, which also affects tomatoes and other fruits and vegetables, is common in succulents. In order for the Erwinia bacteria to break down the plant matter, this rot liquefies the interior of the fruit or succulent. We don’t blame you if you’re making a face because it’s a little gross.

When the bacteria are given to a plant stress area, Soft Rot begins to proliferate. Bacteria can enter the wound area if it falls over and bends a leaf. Using unsterilized scissors or shears increases the risk of introducing microorganisms. Cleaning your instruments is a must before pruning.

How to Identify Soft Rot: Soft Rot develops at the site of a cut, thus it initially resembles a scab before the surrounding region darkens to a dark brown or black colour. Additionally, you can observe that the damaged leaf or area appears damp and waterlogged and may even leak liquid.

Once the plant has been infected with the Erwinia bacteria, there is no known treatment for Soft Rot. However, you can attempt to avoid Soft Rot by immediately treating any wounds on the plant with a fungicide. To prevent overwatering, allow the soil completely dry between waterings, and keep succulents away from places with high humidity levels.

How long does root rot take to heal on a plant?

If you follow the above instructions, your overwatered plant will typically recover in 714 days. It can take more time if there was significant damage. However, if there were sufficiently strong roots, results are frequently seen in as little as two weeks.

After repotting, give the soil a light watering and wait until it is dry before adding more. Avoid watering the plant excessively like you did previously, especially now!

How can soil with root rot be treated?

The more quickly root rot is discovered, the more likely it is that you can save the damaged plants. If you think your plant may have root rot, use this procedure.

  • 1. Define the source of the rot. Just because your plant is withering doesn’t mean it has root rot. Instead, carefully dig it out of the ground and look at the roots to determine how healthy it is.
  • 2. Wash the roots in a sink of water. As much soil as you can away from the roots should be removed because it can be fungus-infected.
  • 3. Remove the damaged portions. Trim away any muddy or black roots using clean tools. Be aggressive since root rot might return if it is not treated. After pruning, if you have very little root structure left, remove some of the leaves to give the roots less growth to sustain.
  • 4. Get rid of the dirt. You should get rid of the potting soil even if you’re not certain that a fungal infection is what caused the root rot. It isn’t worth the risk to maintain dirt if there is a possibility that it contains spores.
  • 5. Thoroughly wash your tools and the pot. Rub alcohol or a bleach solution made from nine parts water to one part bleach should be used to clean both your equipment and the plant’s container. As a result, fungus spores won’t spread.
  • 6. Put new dirt in the plant’s pot. Gently separate the remaining roots and completely enclose them in a well-draining potting mix appropriate for your particular plant to stop future incidences of root rot. Use a potting mix made for container plants instead of backyard dirt; it will have a combination of lightweight elements to prevent soil compaction.