, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
Can You Propagate a Leaf Without a Node?
Simply put, no. For your cutting to produce new leaves, it MUST have a node.
You’ve certainly drooled over stunning images of a single monstera leaf in a lovely glass vase of clear water on Instagram and in home décor magazines.
The bad news is that even while a leaf without a node might develop some roots, it will still only be a leaf with roots. It won’t develop into a new monstera plant with stalks or additional leaves. There will never be more than one leaf.
The node is essential for propagation since it stores all of the genetic data required to develop a new plant.
Do All Monstera Leaves Have Nodes?
Nodes are little bumps that develop on the side of your monstera’s stem that is not covered by a leaf, not even on the stems of the leaves.
Your monstera’s vine develops nodes. In fact, because it hasn’t matured sufficiently, a young monstera may not have any nodes yet. Your monstera may not yet be mature enough to propagate from cuttings if it appears as though leaves are sprouting directly out of the soil. (However, if it’s big enough, you might be able to propagate it using separation!)
Most of your plant’s leaves will be accompanied by a node on the other side of the stem once it begins to vine.
Can You Propagate Leafless Nodes?
So, while you CANNOT propagate a node without a leaf, you CAN propagate a leaf without a node!
Online vendors may provide leafless, unrooted nodes for sale. But the success rate won’t be as high as when you propagate cuttings with one or two leaves.
How are split leaf Monsteras propagated in water?
The Monstera deliciosa can be easily rooted in water, just as many other plants. In addition to creating a stunning display piece, water propagation is a reasonably simple method of growing numerous new Monsteras with little effort. A few simple tools, a lot of sunshine, and lots of time are all you need.
You must locate a region of the Monstera deliciosa plant that has a node if you want to root it in water. Place the cutting in water in a location with bright, indirect light after using sharp shears to remove the plant beneath the node. After a few weeks, the cutting’s tip should start to sprout roots.
There is much more to this process than what is described above, but this quick summary gives you a decent idea of how simple it is to grow a Monstera in water. The remainder of the essay will cover the specifics of rooting a Monstera in water, what to expect from a cutting that has been propagated in this manner, and some advantages and disadvantages of water propagation.
How are Monstera cuttings propagated?
How to grow delicious monstera. You will require a Monstera deliciosa plant, cutting-edge scissors, and either a pot of soil or water.
Pick a stem to cut.
Pick a cutting of stem that has numerous nodes or leaves. While some aerial roots are useful, they are not necessary.
Pick a growth medium.
Your cutting can be multiplied in either water or soil. Water functions equally well as dirt and has the advantage of making progress monitoring simpler.
- Warm and bright
- Keep wet and fresh.
If growing in water, make regular water changes. Give it regular waterings if it’s growing in soil to keep the cutting damp.
Disregard it!
If you took the cutting during the winter dormant phase, it can take some time for any growth to develop.
Pot up
When you spot established new growth, such some roots and a leaf that hasn’t fully expanded, pot it up in a suitable container.
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
How should a broken Monstera leaf be handled?
DO NOT CUT OFF THE TOP LEAF OF YOUR MONSTERA AT THE BASE OF THE PETIOLLE IF IT HAS BLACK SPOTS (the stalk that holds the leaf up from the main stem). The top growth point, or terminal bud, is located on the top leaf petiole. The petiole’s side has a bump where the subsequent leaf will develop if you look attentively. Leave the stalk intact and only remove the leaf, allowing your Monstera’s new growth to continue to grow.
It has already generated a new leaf from its petiole for a lower leaf. A lower leaf’s connection to the main stem can be safely severed at the bottom of the leaf. The petiole may eventually die and fall off the stem if you leave some of it connected.
Monsteras with most leaves dead
Cutting off an excessive number of leaves at once can be harmful to a Monstera plant’s ability to recuperate if the bulk of the leaves are damaged. Keep any leaves with healthy green sections since plants require them to photosynthesize. To allow the plant to continue making energy from the remaining green leaves, first only remove the leaves that are the most severely injured or completely dead. If the remaining leaves continue to deteriorate, you can remove them later.
It’s still possible to rescue your plant even if all of its leaves are dead. An axillary bud, also known as a lateral bud, will activate and branch off to create a new leaf as long as the stem and roots stay in good condition. To activate several buds, you can also cut and propagate your Monstera as stem cuttings. This method should only be used as a last resort because it will be extremely slow without leaves.
How much time does Monstera take to root in water?
You should plan on giving your Monstera cutting around 6 weeks before planting it in soil so that roots can form.
In order to guarantee a strong root system has established for a better chance of survival, I often advise waiting at least 2-3 months.
However, as long as you change the water frequently, clean the roots, and transfer the cutting into a larger jar as it grows, a Monstera can survive in water for many months (if not years).
It is prepared to be put in soil when a lovely cluster of roots fills your container.
You can plant your Monstera cutting as long as it has five roots that are at least several inches long.
Keep the Roots Clean
Keep an eye on the roots as they grow every week, and don’t be hesitant to cut off any sections that seem unhealthy.
You can clip out roots that appear to be rotting as long as there are numerous healthy-looking roots (white, yellow, light green, and light brown).
These are typically distinguished from the others by being dark, mushy, or significantly more slimy.
Is it possible to grow Monstera in soil?
Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.
It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.
People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.
Can split leaf philodendrons be propagated in water?
You might recall that your grandmother started growing her own plants in water jars. This time-tested method is still a great technique to propagate many different kinds of plants, including vining or soft-stem philodendron variants (Philodendron spp.). Prepare a cutting of a philodendron, then submerge it in water. New roots will sprout from the cutting. The philodendron is one of the few houseplants that can thrive in water permanently, though you can plant it in a flowerpot or in the garden after it roots.
How are split leaf philodendrons reproduced?
- To ensure that the soil is well moistened, mix the dirt well.
- Cut healthy split-leaf philodendron stems into 6-inch portions just below the aerial roots.
- Apply rooting hormone to a paper towel or plate.
- Put a lid on the growth tray.
- Place the growing tray in a warm, well-lit area.
Can aerial roots be used to proliferate Monstera?
Unfortunately, if all you have is an aerial root, it is not possible. You’ll need a portion of Monstera stem with at least one node for successful propagation. It should ideally also have one or two leaves.
It’s quite acceptable if the node on your Monstera cutting has an aerial root sprouting out of it. This area of the cutting has the potential to produce roots, giving you a brand-new Monster deliciosa houseplant.
Did you realize? You can read the complete Monstera propagation guide to learn everything there is to know about growing Monstera.
Will Monstera regenerate after being cut?
What do you do now that you have a clipping from your Monstera plant? Will the plant ever produce those lovely, large leaves again, or will it perish forever?
Well, don’t worry; the Monstera has magical abilities and will regenerate all of its lost stems and leaves (at least if you take good care of it)!
The Monstera will regenerate a new growing point from the closest node where the cut was made after being made. The portion of the plant that you removed will have fully recovered within a few months.
Light, water, soil, humidity, and fertilization are just a few examples of the variables that affect how quickly a plant will develop.
How can you get monstera water into the ground?
You must transfer your cutting from the propagation media to soil after it is prepared. So that everything is ready to go, choose a pot and prepare your soil mixture beforehand.
Removing propagation medium
The propagation media should first be removed as much as you can without harming the roots. As a result, it will be simpler to plant your Monstera cutting because the roots will be free to assume the shape of their new container. Additionally, it guarantees they’ll have access to their new soil mixture.
It’s simple to remove the cutting for water. Work the roots gently free of additional materials, such as perlite or moss, and then allow the extra material fall off.
Because the root hairs of some plants, like moss, adhere to the medium, this can be a little tricky. Here are a few advices:
- Take the cutting out of its container, then submerge the roots with some water. The roots will release loose debris, which will float to the surface.
- First, separate the roots from the tips. To prevent breaking it, start at the tip of each root and work your way backward, untangling it a little at a time.
- When utilizing moss, pick a long-fibered kind of sphagnum moss of superior quality. This will enable you to remove it from the roots without breaking, pulling it loose in long chunks.
- Be tolerant! With time, even the most difficult root knot will unravel. Start with the simpler areas and return to the more challenging ones once the root ball has loosened.
Maintaining moisture at the cutting’s roots is crucial during the transition. The plant won’t be able to absorb water as well if the roots dry out since the root hairs will die. Roots that have been damaged or dried out can decay very fast. Leave the cutting submerged in water if you need to take a break from removing the roots to keep the roots moist.
Planting a Monstera cutting
Add one to two inches (2.55 cm) of your potting mix to the pot’s bottom. Place the cutting in the pot while holding it in the desired sitting position. After that, cover the roots completely with soil mix, leaving about 1 inch (2.5 cm) of space at the top of the container to prevent soil from spilling.
Avoid packing the soil mixture tightly around the roots. If there are any air spaces, gently poke the dirt there with a chopstick. By doing this, you can re-distribute the dirt without compacting it around the roots using the chopstick’s tip.
How deep to plant a monstera cutting
It is best to keep the stem and nodes of your Monstera above the earth, just like when you are spreading it. This enables you to keep a closer check on the stem and helps prevent stem rot.
Sometimes the plant won’t be able to stand erect without burying some of the stem, depending on the shape of your roots and your cutting. It’s acceptable in this instance; just watch out for overwatering. To ensure that I can still see a buried stem even though it is hidden, I like to place the cut end of the stem next to the edge of my clear pot.
Watering a newly planted Monstera cutting
Make sure to water a Monstera cutting as soon as you plant it! Keep in mind that during the transition we want the roots to stay wet. Water until all of the soil is moist and droplets appear in the drainage holes in the bottom of your pot.
It’s crucial to water your cutting again after planting. Keep a tight check on your new plant, and don’t wait until the soil is completely dry before giving it some additional water. Your Monstera needs a continually wet atmosphere as it adjusts. This is crucial if you wish to plant a Monstera cutting directly into the ground.
You can begin introducing the plant to a regular watering regimen after the second treatment. If you are using a clear container, check the soil for fresh root growth to make sure your plant is healthy and doing well in its new environment.
For the best Amazon items for caring for your Monstera plants, go here. To save you time, we investigated the items, read through the reviews, and even tested them. Our own Monstera (Deliciosa, Adansonii, and Albo Variegata) plants use these identical items, and Instagram users love them!