How To Propagate Monstera Thai Constellation

During the growth season, cut a plant stem from your mature, robust Thai Constellation. Make sure the stem cutting has a leaf and at least one node. The cutting won’t root if there isn’t a node on it! I’ve included a photo of one of the nodes on my usual Monstera Deliciosa plant.

Now comes the challenging part. You shouldn’t use anything too heavy because the Thai Constellation is prone to decay. But you also want to maintain the medium’s moisture. How can you accomplish that?

Well, I definitely wouldn’t use a straight dirt mixture. Many people with great success use a combination of perlite, sphagnum moss, and some high-quality soil. (If you’re interested, I also have a page about how to grow cuttings in sphagnum moss.)

Can Monstera be grown from seed directly in the ground?

Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.

It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.

People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.

Can cuttings of Monstera be propagated?

Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.

Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.

What distinguishes Monstera from Thai Constellation?

The Thai Constellation and Albo Borsigiana are the two primary varieties of variegated monsteras. If you want to purchase a variegated monstera online, you should be aware of the variations in what you’ll receive.

The Thai Constellation has off-white (nearly cream colored) speckles throughout, typically has larger leaves, and becomes a much fuller-looking plant as it ages, making it easy to distinguish it from the other common variegated Monstera.

The Albo’s variegated areas are larger and more reminiscent of pure white, and it also features some speckles. Due to the taller stems and smaller leaves, the plant also has a slightly more sparse appearance. More information on taking care of a monstera albo can be found here.

You’re probably getting an Albo if you’re getting a cutting. The young plant you receive will probably be a Thai Constellation.

It’s crucial to note that the variegation in each of these plants differs significantly, and knowing what causes it will enable you to better recognize the variations and select the one that is best for you.

You must think about whether one is more likely to revert, as well as simplicity of care, size, and cost.

You should be able to distinguish the variations among variegated Monsteras using the information in this page to assist you make that choice.

This article contains affiliate links, which means that if you click over and buy something, I might receive a small compensation.

How does the constellation of Monstera Thai expand?

Keep your Thai Monstera in bright ambient light, as you would any variegated plant. Better lighting is better (within reason, dry, crispy edges and tips could mean you need to back off a bit). But unlike some plants with a lot of color variation, the Thai can tolerate some exposure to sunlight.

Which is preferable for Monstera propagation—soil or water?

Even while Monstera cuttings are generally fairly tolerant of the growing medium, location, and conditions, there are still a few things you may change to boost your chances of success or hasten your progress.

Time of year

It is not necessary to timing when you take a cutting, but keep in mind that winter, when plants are often dormant, may cause your cutting to start more slowly.

Time frame

The first thing to stress is the importance of patience. Some cuttings will immediately take root and quickly produce new leaves. Others may experience a protracted period of inactivity. Spring will frequently revive cuttings that had been dormant.

The best way to determine if your cutting is still in good shape while doing nothing is described below.

Light and warmth

Monstera cuttings thrive in warmth and light, and they will grow the quickest on a warm, sunny windowsill. It has been said that Monstera cuttings should be started with a heat pad, but in my experience, that is not true. A heat pad, however, could perhaps hasten the growth process.

Moisture

If they are in soil, they must also be maintained gently damp but not wet—wet feet are bad for them and will cause them to decay. Once a week, check their soil and, if it feels dry, give it a little water. It is not necessary to place a plastic bag over them, as is occasionally advised.

Size of cutting

More nodes and longer or larger stem sections tend to produce more new growth, including several new stems. Given that Monstera is a vine plant with a single long stem, this is significant. If your cutting produces leaf sprouts on several nodes, each of these will grow into a stem, resulting in bushier growth at a small size.

Growing medium

The benefit of propagating in water in a glass jar is that any new growth is visible right away. However, it is usually advisable to plant larger cuttings directly in the ground if they have leaves and aerial roots.

Water choice

You can use conventional tap water, but if it’s particularly hard, use caution and avoid using water that has been artificially softened. Both rainwater and distilled water are acceptable. If you submerge the majority of the stem part in water, leaves and roots will grow rather happily.

Soil mix

Use a light, freely draining potting compost when young plants and a more hummus-rich mixture as they mature.

Planting stems vertically with just the top inch above the soil is the simplest and most space-efficient approach to pot cuttings in soil.

I was concerned that for new leaves to grow, some stem nodes would need to be above the surface, but that wasn’t the case at all. Under the soil surface, new leaves began to emerge and easily pushed their way to the surface to spread out.

Potting up

If you have many stem cuttings that are housed in the same pot, you should separate them as soon as new growth appears. My own experiences indicate that, if handled correctly, Monstera are fairly resilient and don’t mind being disturbed.

You can bury the entire original stem cutting for a neater appearance rather than having to leave any of it above the soil line.

Expect no new leaf growth.

Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.

Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.

It lacks the tissue needed for cell division and the development of new leaves.

The leaf can survive without a node.

To keep turgid and fresh, the leaf will continue to absorb water by osmosis.

However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.

Where should I cut Monstera to spread it?

, you should separate each leaf and node on either side of the node/aerial root into independent segments.

The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).

After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.

Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.

It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.

The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.

The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.

Simply add water to completely cover the roots and ends once they are positioned how you like.

Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!

In addition to new roots, it has also sprouted a huge number of new leaves.

Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!

Your inquiries are addressed:

Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.

I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.

Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.

It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.

All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.

In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as

Can Monstera be rooted in water?

The Monstera deliciosa can be easily rooted in water, just as many other plants. In addition to creating a stunning display piece, water propagation is a reasonably simple method of growing numerous new Monsteras with little effort. A few simple tools, a lot of sunshine, and lots of time are all you need.

You must locate a region of the Monstera deliciosa plant that has a node if you want to root it in water. Place the cutting in water in a location with bright, indirect light after using sharp shears to remove the plant beneath the node. After a few weeks, the cutting’s tip should start to sprout roots.

There is much more to this process than what is described above, but this quick summary gives you a decent idea of how simple it is to grow a Monstera in water. The remainder of the essay will cover the specifics of rooting a Monstera in water, what to expect from a cutting that has been propagated in this manner, and some advantages and disadvantages of water propagation.

How long does it take Monstera to spread?

It takes patience to propagate. After 3-5 weeks, the roots from your cuttings should start to grow. The new roots should be at least an inch long; this is the primary thing you want to check for. Your cutting is prepared to be planted into a pot once it develops several roots that size.

Are Thai Constellations uncommon?

THIS PLANT MUST BE PICKED UP HERE AT THE RANCH AND IS ONLY AVAILABLE FOR PICK UP.

Monstera “Thai Constellation” is an exceptionally uncommon and prized Monstera. With its creamy yellow and green variegation, its foliage is incredibly lovely. Each and every plant collector needs it.

*The plants in the images are the actual ones you will receive. Rare plants cannot be returned or refunded; buy at your own risk. Please take note that the image of the measuring tape approximates the height of the plant.

During the colder months (November to March), all plant orders come with a FREE HEAT PACK.

Why is Thai Constellation monstera so expensive?

Many lovers of indoor plants favor monstera because of its big, flashy green foliage.

The large leaves of the Thai Constellation type are decorated with white brushstrokes and specks for a dual-tone aesthetic, which increases visual intrigue.

Why is Thai Monstera Constellation so costly? The straightforward explanation is that this plant has a stunning and distinctive color pattern that is uncommon and challenging to duplicate. The more exclusive and difficult to obtain something is, the more expensive it will be. The slow growth and unique maintenance requirements of this plant also contribute to its expensive cost.

The astounding total of this botanical beauty is affected by a number of additional aspects.

Learn more about the Monstera ‘Thai Constellation’ in the following paragraphs, as well as what to do if you do manage to find one to add to your collection.