Seeds, stem cuttings, or suckers can all be used to multiply the Swiss cheese vine plant, though cuttings and suckers are the more typical methods.
It is simple to take Swiss cheese plant cuttings if you are wondering how to do it. Simply take stem cuttings, leaving a portion of the stem attached, by cutting immediately after a leaf node, for this Swiss cheese plant multiplication. Trim the first leaf from the cutting’s base, then put the node in the ground. If you want to, you can apply rooting hormone, but it’s not required. Water thoroughly and let the water drain away. Ideally, you might wish to root the cutting in water first, then transfer it to a pot once rooting has sufficiently started. The Swiss cheese vine cutting should be rooted in water for two to three weeks before being transplanted to a container with nutrient-rich potting soil.
Additionally, you can grow Swiss cheese plants by wrapping wet moss around the stem at a tiny aerial root and leaf axil and securing it with twine. Place this area into a transparent bag and secure the top (adding a few small air vents). The Swiss cheese vine plant should start to grow new roots in a few months.
Can Monstera be grown from seed directly in the ground?
Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.
It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.
People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
Can cuttings of Monstera grow in water?
The Monstera deliciosa can be easily rooted in water, just as many other plants. In addition to creating a stunning display piece, water propagation is a reasonably simple method of growing numerous new Monsteras with little effort. A few simple tools, a lot of sunshine, and lots of time are all you need.
You must locate a region of the Monstera deliciosa plant that has a node if you want to root it in water. Place the cutting in water in a location with bright, indirect light after using sharp shears to remove the plant beneath the node. After a few weeks, the cutting’s tip should start to sprout roots.
There is much more to this process than what is described above, but this quick summary gives you a decent idea of how simple it is to grow a Monstera in water. The remainder of the essay will cover the specifics of rooting a Monstera in water, what to expect from a cutting that has been propagated in this manner, and some advantages and disadvantages of water propagation.
Can Monstera survive forever in the water?
Monstera plants, for example, can live in water indefinitely; just make sure to change the water if it becomes cloudy, and you may occasionally top it up with diluted hydroponic fertiliser to replace the nutrients it would normally get from soil. Additionally, see water propagation and succulent water propagation.
Where should I cut Monstera to spread it?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertiliser during the growth season (April to September). I will fertilise every other week because I water them all once a week. I prefer liquid fertilisers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighbourhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
Which is preferable for Monstera propagation—soil or water?
Even while Monstera cuttings are generally fairly tolerant of the growing medium, location, and conditions, there are still a few things you may change to boost your chances of success or hasten your progress.
Time of year
It is not necessary to timing when you take a cutting, but keep in mind that winter, when plants are often dormant, may cause your cutting to start more slowly.
Time frame
The first thing to stress is the importance of patience. Some cuttings will immediately take root and quickly produce new leaves. Others may experience a protracted period of inactivity. Spring will frequently revive cuttings that had been dormant.
The best way to determine if your cutting is still in good shape while doing nothing is described below.
Light and warmth
Monstera cuttings thrive in warmth and light, and they will grow the quickest on a warm, sunny windowsill. It has been said that Monstera cuttings should be started with a heat pad, but in my experience, that is not true. A heat pad, however, could perhaps hasten the growth process.
Moisture
If they are in soil, they must also be maintained gently damp but not wet—wet feet are bad for them and will cause them to decay. Once a week, check their soil and, if it feels dry, give it a little water. It is not necessary to place a plastic bag over them, as is occasionally advised.
Size of cutting
More nodes and longer or larger stem sections tend to produce more new growth, including several new stems. Given that Monstera is a vine plant with a single long stem, this is significant. If your cutting produces leaf sprouts on several nodes, each of these will grow into a stem, resulting in bushier growth at a small size.
Growing medium
The benefit of propagating in water in a glass jar is that any new growth is visible right away. However, it is usually advisable to plant larger cuttings directly in the ground if they have leaves and aerial roots.
Water choice
You can use conventional tap water, but if it’s particularly hard, use caution and avoid using water that has been artificially softened. Both rainwater and distilled water are acceptable. If you submerge the majority of the stem part in water, leaves and roots will grow rather happily.
Soil mix
Use a light, freely draining potting compost when young plants and a more hummus-rich mixture as they mature.
Planting stems vertically with just the top inch above the soil is the simplest and most space-efficient approach to pot cuttings in soil.
I was concerned that for new leaves to grow, some stem nodes would need to be above the surface, but that wasn’t the case at all. Under the soil surface, new leaves began to emerge and easily pushed their way to the surface to spread out.
Potting up
If you have many stem cuttings that are housed in the same pot, you should separate them as soon as new growth appears. My own experiences indicate that, if handled correctly, Monstera are fairly resilient and don’t mind being disturbed.
You can bury the entire original stem cutting for a neater appearance rather than having to leave any of it above the soil line.
Is it possible to grow Monstera without leaves?
A Monstera stem node can grow without a leaf. Only the plant’s food is produced by the leaves. Just make sure it’s in good shape. Even its green skin can provide some nourishment.
Can You Propagate a Leaf Without a Node?
Simply put, no. For your cutting to produce new leaves, it MUST have a node.
You’ve certainly drooled over stunning images of a single monstera leaf in a lovely glass vase of clear water on Instagram and in home décor magazines.
The bad news is that even while a leaf without a node might develop some roots, it will still only be a leaf with roots. It won’t develop into a new monstera plant with stalks or additional leaves. There will never be more than one leaf.
The node is essential for propagation since it stores all of the genetic data required to develop a new plant.
Do All Monstera Leaves Have Nodes?
Nodes are little bumps that develop on the side of your monstera’s stem that is not covered by a leaf, not even on the stems of the leaves.
Your monstera’s vine develops nodes. In fact, because it hasn’t matured sufficiently, a young monstera may not have any nodes yet. Your monstera may not yet be mature enough to propagate from cuttings if it appears as though leaves are sprouting directly out of the soil. (However, if it’s big enough, you might be able to propagate it using separation!)
Most of your plant’s leaves will be accompanied by a node on the other side of the stem once it begins to vine.
Can You Propagate Leafless Nodes?
So, while you CANNOT propagate a node without a leaf, you CAN propagate a leaf without a node!
Online vendors may provide leafless, unrooted nodes for sale. But the success rate won’t be as high as when you propagate cuttings with one or two leaves.
Do I need a node to propagate Monstera?
I adore how easy it is to spread a Monstera deliciosa. You may quickly fill your space with Monsteras or have a large number of baby plants to give to friends because they grow quickly from cuttings. Although nodes are suggested to be included on stem cuttings for propagation in online instructions, is this really necessary?
Can a Monstera be propagated without an A node? regrettably, no. Without a node, it is impossible to develop a Monstera deliciosa from a cutting. The components required to produce fresh growth are found in nodes. A Monstera leaf can withstand prolonged hydration and even develop roots, but only nodes can support new stem and leaf growth.
It can be tempting to try to grow a Monstera from a leaf, particularly if you accidentally snapped it off and want to try to save the fragment. But regrettably, it will never produce another plant. You will never have anything other than a leaf until the node is included. I’ll define a node in more detail below, along with the reasons cloning your Monstera is essential.