How To Polish Monstera Leaves

The strong, gorgeous leaves of a Monstera plant are one of its most remarkable features. However, they will require routine upkeep and cleaning if they are to remain healthy. Fortunately, cleaning Monstera leaves is fairly easy.

Monstera leaves should be gently cleaned on both sides using a moist cloth. When not wiping a leaf, be sure to support that side. At least once per week, clean the leaves.

The significance of thoroughly cleaning your Swiss Cheese plant’s leaves and how to do so will be covered in this article. I’ll also go through different ways to clean your leaves and whether or not to use chemicals.

How do you polish leaves of Monstera?

Cleaning monstera leaves with distilled or purified water, a little non-detergent soap, and a microfiber cloth is one of the simplest methods.

To clean the leaves, first mist them with distilled water and let them sit for around five minutes. Any trash or other crud on the leaves will become looser as a result.

Use a half-gallon of distilled water and a teaspoon of detergent-free soap (we recommend Dr. Bronner’s pure organic castile soap) to soak your microfiber cloth. Start cleaning the tops and bottoms of the leaves very gently, being careful to hold the opposite side of the leaf in place with your hand. Here, take your time to avoid accidently breaking, cracking, or scratching the leaves.

After thoroughly wiping each leaf, give them a gently rinse in the shower or with a hose spray.

To prevent the soap and water from dripping into the soil, you might wish to tilt your plant to one side.

To keep your leaves clean and healthy, we advise doing this at least once every few months!

How can I make the leaves on my plant shiny?

First things first: We do not advise cleaning your indoor plants with leaf-shining treatments. There are various commercial plant shine products available, and many stores utilize them to enhance the appearance of their plants. Nevertheless, leaf shine products sometimes cause more harm than benefit.

Stomata, which are microscopic pores found in plants, are essential for many of the organisms’ processes. Stomata allow oxygen to enter through during respiration. Stomata let carbon dioxide to pass through during photosynthesis. Additionally, stomata let water vapor to flow through during transpiration. Numerous leaf shine items block these apertures with oil or wax, which restricts the critical gas exchanges that stomata are necessary to.

Even while the leaf shine product makes the promise that it is clog-free, its residue might draw in more dust and dirt, giving you a plant that is ultimately not all that shiny. You get caught in a never-ending cycle of cleaning and re-shining as the foliage gets harder to clean.

We all agree that plants are beautiful, but if you want to bring out even more of their beauty, there are safer ways to do it without endangering the health of the plants.

Clean plants’ leaves with a damp cloth.

Wet the towel (or sponge) and squeeze away the extra moisture. Place one hand softly underneath each leaf to support it while the other hand wipes down the top of the leaf while moving away from the stem. Repeat the procedure on the leaf’s underside, where common houseplant pests like to conceal themselves. Use a gentle brush if the leaves are delicate or little.

Shower your houseplants.

All plants, but especially those with numerous leaves, benefit greatly from a light, lukewarm shower. To make sure the water cleanses the undersides of the leaves, carefully run your hands through the vegetation. For ferns, orchids, and palms that enjoy dampness, this technique works well. Just be careful not to overwater your plant while you’re doing it (only water plants in containers with drainage holes) and be sure to shake off any extra water from the leaves afterward.

Clean leaves with a bit of soapy water.

Try combining water and all-natural liquid soap if water alone is insufficient. Either bathe your hands with the mixture and gently apply it to the plant, or you can carefully wipe the leaves with a soft cloth dipped in the soap and water mixture. Clean the plant’s leaves from top to bottom; doing so may assist get rid of any potential pests. When finished, thoroughly rinse the plant to remove all of the soapy liquid, then shake off any extra water.

Or opt for a mixture of vinegar and water or lemon juice and water.

Vinegar and water are also useful for removing residue accumulation on leaves. But be careful not to go overboard. Start by combining a gallon of water and one teaspoon of vinegar. After that, carefully dab the mixture onto the leaves of your plants using a delicate cloth. Bonus: The smell of vinegar works wonders to deter pests and curious animals. Lemon juice is a good substitute for vinegar. Mineral salts can be dissolved with the aid of an acid, such as lemon juice or vinegar. Lemon juice and water, in contrast to vinegar and water, won’t get rid of pests on your plants, but it will dissolve mineral buildup from hard tap water on your leaves.

Should plants be treated with leaf shine?

With Leaf Shine, you can not only clean your plants’ leaves and bring back their natural sheen while shielding them from debris, dust, insects, fungus, and disease. It functions as a mild cleaner, polish, and vitamin supplement all in one.

Chitosan, yucca, and sea kelp are used in Leaf Shine’s all-organic, oil-free, chemical-free solution to nourish and fortify plant leaves in just the right proportions. This light solution won’t burn your plant’s leaves, leave behind a film or chemical residue, and is delicate enough to use daily if you so want.

Leaf Shine is available as wipes or an easy-to-use spray bottle that you can use to swiftly and conveniently clean the leaves of your plant. You’ll adore how these simplify your maintenance procedures while enhancing your plant’s inherent attractiveness!

How do I polish plant leaves?

The leaves of your houseplants can be cleaned and polished in a variety of ways with just a fast Google search, but which of those techniques and solutions actually work? Which does not gradually hurt your leaves over time but properly cleans and shines them over time?

Let’s discuss some of the most popular advice, whether it is effective, and how it may benefit or harm your plants.

Coconut Oil to Clean Plant Leaves?

Does it operate? Yes. You will undoubtedly get lustrous plant leaves with coconut oil, at least temporarily.

Although a single application of a little coconut oil probably won’t harm your plant (we get it, sometimes you need to shine up your plant to show off to guests! ), you don’t want to apply it repeatedly over the long haul.

For starters, coconut oil doesn’t actually clean the leaves; it merely forms a shiny veneer on top of the leaves. Additionally, because it is perched on the leaves, it will prevent dust and other particles from evaporating by making them stick to the leaves. This could make cleaning and dusting the leaves more challenging, particularly if you let dirt accumulate over time.

Additionally, when coconut oil, a rich lipid, and dust are combined, muck is produced that settles on the leaves and immediately clogs the pores. You already know what that means: your plant will have a harder time breathing and converting sunlight into energy.

Overall, we do not advise using coconut oil to maintain clean, glossy leaves over the long run. Who has time for that, though? It would be alright if you are particularly meticulous about wiping down the leaves of your plant every few days so the dust never has a chance to build up.

Olive Oil to Shine Plant Leaves?

Similar issues can arise with olive oil and coconut oil for similar causes. It creates a fleeting shining sheen on the surface of the leaves that ultimately draws in dust and other particles, which can accumulate and enter the pores of the leaves.

Is Baby Oil Safe for Plant Leaves?

Although baby oil is occasionally used in homemade insecticides and may be OK for short-term use to keep off household insects, we do not advise using it to clean and polish plant leaves.

Baby oil is still greasy and can clog leaf pores like any fatty, oily material, while not being as rich as coconut or olive oil.

Applying gummy fats to plant leaves is not the best cleaning method because it will eventually cause hazardous accumulation.

Milk to Clean Plant Leaves?

For many of the same reasons that different oils are recommended, milk is frequently suggested for cleaning and shining plant leaves. Unless you’re using skim milk, the fat in milk can settle on leaves and temporarily give them a shiny appearance.

However, milk does in fact provide several vitamins and minerals that are good for plant leaves. The minor amount of calcium may be beneficial for the leaves, and the protein in dairy milk may aid in removing any residue or debris from the leaves.

A 50/50 mixture of skim milk and water can be a powerful leaf cleaner that also has some nutritional advantages.

Cleaning Plant Leaves With Vinegar

This is a hazardous one. Yes, vinegar can remove residue and mineral deposits from your leaves when heavily diluted with water. However, using this technique can also harm plants with softer, more fragile leaves by burning them with chemicals and discoloring their leaves.

In a rush, cleaning your plant’s leaves with a teaspoon of vinegar and a gallon of water (or a half teaspoon and a half gallon) can work, but there are simpler, safer, and more efficient ways to do it!

Lemon Juice and Water to Clean Plant Leaves

Lemon juice is frequently advised as well, similar to vinegar. And many of the same dangers apply.

Yes, lemon juice diluted in water (about half a lemon squeezed into a pint of water) helps remove residue and buildup from your leaves, but the lemon juice’s acids can still cause harm even when much diluted.

Soap and Water to Clean Plant Leaves

This is one suggestion that we wholeheartedly support! Plant leaves can actually be cleaned very effectively with a light soap and water mixture.

What you should do is:

To start, use distilled water to thoroughly wet the leaves of your plant. Then, wait for about 5 minutes to let any dust or accumulation relax.

After that, combine a half gallon of distilled water with a teaspoon of detergent-free soap, such as Dr. Bronner’s pure organic castile soap. Use a microfiber towel to gently wipe both sides of each leaf after dipping it in the soap-and-water mixture. Avoid vigorously scrubbing the leaves or using your nails to scratch or scrape them; doing so could remove the leaf’s top layer, which could then lead to the leaf drying out.

After wiping all of the leaves, give your plant a last rinse in the shower or with a hose. To prevent the soapy water from soaking into the soil, you might wish to tilt the plant to one side. (However, if some spills into the potting soil, don’t worry.) To maintain your leaves clean and healthy, repeat this process every few months.

Can I Use Baby Wipes on My Plant Leaves?

This one is challenging. Baby wipes can be mild, and they are soft, which is a nice thing.

You never truly know what you’re getting with wipes because not all of them are created equal. Baby wipes may include substances that are good for skin but bad for plants. Since baby wipes aren’t exactly intended for plant leaves, we believe it is best to avoid using them on plants.

Can olive oil be used to polish plant leaves?

My indoor plants currently have a sad-looking appearance, and their leaves are heavily covered with dust. This morning while I watered them, I pondered whether olive oil would be a great option to polish them and make them appear more vibrant and alive.

Olive oil can be applied to plant leaves, but only after diluting it with water. Spray it on the leaves to add shine after putting it in a spray bottle. Pure, undiluted olive oil shouldn’t be applied directly to the leaves because it can clog pores and prevent the plant from absorbing and filtering the air.

There are many other factors to take into account when deciding what to use to shine your plan; olive oil may not be the ideal option for making plant leaves glossy and healthy. Can coconut oil be used? Baby oil, what about it? Will applying olive oil to plant leaves eliminate insect infestations?

Can coconut oil be used to polish plant leaves?

A tiny drop of coconut oil applied to plant leaves lends a lovely gloss and deters some pests and diseases like mildew. A cotton rag with a few drops of coconut oil added should be gently rubbed on the leaves.

By applying this to the foliage, the leaves are prevented from absorbing an excessive amount of moisture. It also aids in the prevention of fungal illnesses and problems in plants because it is abundant in microbial and antifungal qualities.

Avoid placing plants in direct sunlight while using coconut oil on them because the oil may end up absorbing more heat from the sun and could burn the foliage.

Make Organic Pesticide

To get rid of mealybugs, mites, aphids, and caterpillars, you can make organic pesticides with coconut oil. This herbicide coats insects and closes off their pores for respiration.

What You’ll Need Is:

  • Coconut oil, two cups
  • organic castile soap, half a cup
  • Neem oil, 1/2 tsp (optional)
  • aerosol can
  • full jar


Castile soap and coconut oil are combined in the empty jar. Shake the jar with the lid on tightly until it turns white. Fill a spray bottle with the diluted solution after diluting it with a little water.

This insecticide has a three-month shelf life. On plants with delicate or thin foliage, avoid using this solution.

Weed Killer

Coconut oil can be used to get rid of weed without harming the environment or important plants. In a saucepan, combine equal portions of vegetable oil and coconut oil and warm over low heat. Additionally, you can add 15–20 drops of neem oil to the mixture to increase its potency.

Transfer the solution to a spray bottle once it has cooled. Spray it on weeds to get rid of them organically after giving it a good shake before use! You must continuously spray this for 5-7 days.

Use it for Cleaning

To remove dirt and filth, mix 1 teaspoon of baking soda with a bowl of coconut oil. On unclean surfaces like those in the kitchen, it works fantastically well!

Great Insect and Mosquito Repellent

In a study conducted at the Department of Agriculture, University of Nebraska in the United States, it was discovered that the medium-chain length fatty acids in coconut oil exhibited the strongest insect repellent efficacy for up to 96 hours during the hot summer.

Apply 50 cc of coconut oil evenly to the exposed portions of the body before going to a garden or any other place where there may be mosquitoes to make it more effective by mixing 4-6 drops of neem oil into it.

Provides Relief from Sunburn

Applying virgin coconut oil to the area will provide you with immediate relief if you developed a sunburn while working long hours in the garden. Additionally, it will lessen redness and swelling.

Natural Sunscreen

This study found that coconut oil has an SPF of around 8, protecting skin from the sun’s damaging UV rays.

Twenty minutes prior to stepping outside in the sun, combine equal quantities of coconut and olive oil and apply it to the exposed areas of the body until it is entirely absorbed.

Acts as a Natural Paw Cream for Pets

Concern should be expressed if an animal has dry, cracked paws. Their feet will remain flexible if coconut oil is applied to them, particularly during the winter months.

Lubricate Castor Wheels

Over time and with repeated use, debris and rust buildup can cause castor wheels to become stuck. The exceptional lubricating properties of coconut oil ensure that the wheels are protected from rust and move smoothly and freely.

After washing the wheels, add a few drops to make them move more easily!

Effective Against Dog Ticks

Dogs suffering from tick, flea, and mange mite infections receive immediate relief because to the antibacterial qualities of coconut oil. By coating their exoskeleton, these pests are also removed from dogs by applying virgin coconut oil. They become immobile and are choked by this.

Inflamed skin on cats and dogs can also be treated with coconut oil’s anti-inflammatory effects, which also improves the condition of their fur.

Apply equal parts of tea tree, neem, peppermint, and coconut oil to the affected area to increase its efficacy.

Great for Hair and Skin

Essential fats found in coconut oil give the skin a smooth texture. According to one study, virgin coconut oil (VCO) moisturises and soothes skin problems’ symptoms. By improving the function of the skin barrier, VCO’s anti-inflammatory effect reduces inflammatory indicators and protects the skin.

VCO’s anticancer, antibacterial, analgesic, antipyretic, and anti-inflammatory characteristics also play a significant role in skin aging, inflammation, and carcinogenesis. Additionally, it offers efficient defense against UVB rays.

Apply a small amount (about the size of a dollop) to your palm and rub it in a circular motion over your face and other body parts until the skin has completely absorbed it. For optimal results, perform this each day just before night.

Additionally beneficial for damaged and dry hair, the oil. This study found that coconut oil, a triglyceride of lauric acid (the primary fatty acid), has a strong affinity for hair proteins and can penetrate inside the hair shaft to provide the moisture and conditioning that the hair shaft requires to stay healthy.

For optimum results, massage lukewarm virgin coconut oil into your scalp and let it sit for 30 to 40 minutes before showering.