How To Plant Monstera Cuttings

Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.

Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.

Can I plant a Monstera cutting directly in the ground?

Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.

It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.

People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.

How should a Monstera cutting with roots be planted?

You must transfer your cutting from the propagation media to soil after it is prepared. So that everything is ready to go, choose a pot and prepare your soil mixture beforehand.

Removing propagation medium

The propagation media should first be removed as much as you can without harming the roots. As a result, it will be simpler to plant your Monstera cutting because the roots will be free to assume the shape of their new container. Additionally, it guarantees they’ll have access to their new soil mixture.

It’s simple to remove the cutting for water. Work the roots gently free of additional materials, such as perlite or moss, and then allow the extra material fall off.

Because the root hairs of some plants, like moss, adhere to the medium, this can be a little tricky. Here are a few advices:

  • Take the cutting out of its container, then submerge the roots with some water. The roots will release loose debris, which will float to the surface.
  • First, separate the roots from the tips. To prevent breaking it, start at the tip of each root and work your way backward, untangling it a little at a time.
  • When utilizing moss, pick a long-fibered kind of sphagnum moss of superior quality. This will enable you to remove it from the roots without breaking, pulling it loose in long chunks.
  • Be tolerant! With time, even the most difficult root knot will unravel. Start with the simpler areas and return to the more challenging ones once the root ball has loosened.

Maintaining moisture at the cutting’s roots is crucial during the transition. The plant won’t be able to absorb water as well if the roots dry out since the root hairs will die. Roots that have been damaged or dried out can decay very fast. Leave the cutting submerged in water if you need to take a break from removing the roots to keep the roots moist.

Planting a Monstera cutting

Add one to two inches (2.55 cm) of your potting mix to the pot’s bottom. Place the cutting in the pot while holding it in the desired sitting position. After that, cover the roots completely with soil mix, leaving about 1 inch (2.5 cm) of space at the top of the container to prevent soil from spilling.

Avoid packing the soil mixture tightly around the roots. If there are any air spaces, gently poke the dirt there with a chopstick. By doing this, you can re-distribute the dirt without compacting it around the roots using the chopstick’s tip.

How deep to plant a monstera cutting

It is best to keep the stem and nodes of your Monstera above the earth, just like when you are spreading it. This enables you to keep a closer check on the stem and helps prevent stem rot.

Sometimes the plant won’t be able to stand erect without burying some of the stem, depending on the shape of your roots and your cutting. It’s acceptable in this instance; just watch out for overwatering. To ensure that I can still see a buried stem even though it is hidden, I like to place the cut end of the stem next to the edge of my clear pot.

Watering a newly planted Monstera cutting

Make sure to water a Monstera cutting as soon as you plant it! Keep in mind that during the transition we want the roots to stay wet. Water until all of the soil is moist and droplets appear in the drainage holes in the bottom of your pot.

It’s crucial to water your cutting again after planting. Keep a tight check on your new plant, and don’t wait until the soil is completely dry before giving it some additional water. Your Monstera needs a continually wet atmosphere as it adjusts. This is crucial if you wish to plant a Monstera cutting directly into the ground.

You can begin introducing the plant to a regular watering regimen after the second treatment. If you are using a clear container, check the soil for fresh root growth to make sure your plant is healthy and doing well in its new environment.

For the best Amazon items for caring for your Monstera plants, go here. To save you time, we investigated the items, read through the reviews, and even tested them. Our own Monstera (Deliciosa, Adansonii, and Albo Variegata) plants use these identical items, and Instagram users love them!

How long does it take for cuttings of Monstera to take root?

, you should separate each leaf and node on either side of the node/aerial root into independent segments.

The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).

After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.

Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.

It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.

The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.

The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.

Simply add water to completely cover the roots and ends once they are positioned how you like.

Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!

In addition to new roots, it has also sprouted a huge number of new leaves.

Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!

Your inquiries are addressed:

Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.

I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.

Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.

It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.

All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.

In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as

Can a new Monstera be grown from cuttings?

If you are an over-thinker (how deep, how long, what soil, where, when, how??) like me and the phrase “simply bung it in a pot” makes you nervous, don’t worry! I also have you.

Make yourself comfortable and prepare to relax as I thoroughly address all of your concerns and questions below with a ton of pictures.

What parts of a Monstera will propagate?

Stem cuttings make it very simple to reproduce monstera. You must choose stem sections that have at least one node when choosing stem.

New leaves and roots will form at the nodes, which are circular rings that are brownish in color and are located where a leaf once was on the stem. One leaf and several roots can be supported by each nodal area.

  • A stem segment that is 20 cm long and has two to three nodes provides many opportunities for the emergence of new roots and leaves; the longer the segment, the more energy it has available to fuel new shoots.
  • I have propagated from pieces as tiny as 5 cm long, with one node.
  • The node is where new development, such as roots, might arise if a section of stem has a leaf emerging from it. Your existing leaf’s petiole will sprout new leaves on that portion.

What parts of Monstera won’t propagate

Not all of the components of your Monstera plant will reproduce to produce new Monstera offspring. This comprises:

  • unconnected leaves without a stem
  • roots or aerial roots that are not linked to stems
  • stem devoid of leaves and no nodes

What will help a Monstera cutting establish quickly?

The cutting will establish itself in its own right more quickly the more portions of the plant it contains. As a result, while choosing where to cut, attempt to include:

  • One or more leaves, as these contribute to the plant’s increased growth potential and quicker establishment.
  • aerial roots or roots. In water or soil, aerial roots will produce ordinary roots as offshoots, which will improve the plant’s capacity to absorb nutrients and water. It’s typical for the thick, brown outer layer of the aerial roots to slough off, so don’t be alarmed.

Just keep in mind that nodes must be present on some piece of the stem; otherwise, trying to plant a leaf will fail.

How long before putting Monstera roots in soil should they be?

You should plan on giving your Monstera cutting around 6 weeks before planting it in soil so that roots can form.

In order to guarantee a strong root system has established for a better chance of survival, I often advise waiting at least 2-3 months.

However, as long as you change the water frequently, clean the roots, and transfer the cutting into a larger jar as it grows, a Monstera can survive in water for many months (if not years).

It is prepared to be put in soil when a lovely cluster of roots fills your container.

You can plant your Monstera cutting as long as it has five roots that are at least several inches long.

Keep the Roots Clean

Keep an eye on the roots as they grow every week, and don’t be hesitant to cut off any sections that seem unhealthy.

You can clip out roots that appear to be rotting as long as there are numerous healthy-looking roots (white, yellow, light green, and light brown).

These are typically distinguished from the others by being dark, mushy, or significantly more slimy.

How long before planting should roots be present?

Over the years, I’ve done a lot of propagation. I evaluated various root lengths for transfer to soil and developed this “green thumb” criterion for the greatest likelihood of success.

Can Monstera survive forever in the water?

Monstera plants, for example, can live in water indefinitely; just make sure to change the water if it becomes cloudy, and you may occasionally top it up with diluted hydroponic fertilizer to replace the nutrients it would normally get from soil. Additionally, see water propagation and succulent water propagation.

How are cuttings planted in soil?

You’ve made the decision to try propagating in order to step up your plant parenting skills. Welcome! You’ve arrived to the correct place. Increase your plant collection or spread the word about your favorite plants to friends by using propagation. It’s also a terrific method to discover more about certain plant species and carry out your own experiments involving plants.

The possibility exists that this propagation lesson will pave the way for you to build a complete propagation station in your home. You might not be able to stop once you realize how simple it is to breed new plants from your old ones!

Although there are several methods for propagating indoor plants, in this post we’ll concentrate on the stem cutting technique. The finest plants for this technique are climbing ones like philodendrons, pothos, and monsteras.

Choose your rooting medium

Decide whether you want to root your cuttings in water or soil first. You’ll notice that method in our illustrations because we advise using water if this is your first time growing a plant. The main advantage of rooting in water is that it is simpler to monitor development as roots form.

Rooting plants in potting soil is enjoyable to try for experienced plant propagators. You can avoid the transplant trauma of moving the cutting from water to soil by roots it directly into potting soil. We include instructions for roots in soil at the bottom of this page if you’re interested in the latter method.

Gather your supplies

If you want to try your hand at stem cutting propagation, you’ll need a few simple tools. What we suggest is as follows:

  • a razor-sharp cutting instrument, like snips or pruning scissors
  • Rub alcohol with
  • hormone for roots (optional)
  • A glass tube or vase and fresh water are needed for water roots.
  • A small pot with drainage and fresh potting soil is needed for soil rooting.

Get to know your plant

It’s time to get to know the plant you’ll be pruning from, often known as the “mother plant.” You must cut a section of the stem that has at least one node in order to take a stem cutting. A node is a tiny raised bump that normally sits next to a leaf and is where new roots will begin to emerge.

Cut the vine immediately below the node you’ve discovered after rubbing alcohol has been used to sanitize your scissors (this prevents bacteria from spreading that could harm your plant). If at all feasible, make sure to include 1-2 nodes as well as anywhere from 2-4 leaves.

Optional: Before putting your cutting in water, dab the end of it with rooting hormone. Although it is not necessary, rooting hormone will hasten the process of germination.

Rooting in water

Add new water to your propagation jar before adding the clipping. Wait until the roots lengthen to about 1-3 inches and develop in a warm, sunny environment away from direct sunlight. Be patient; it can take days, weeks, or even months to complete this. Plant your cutting in fresh soil in a container once roots have formed, then water normally.

Rooting in soil

the aforementioned trimming instructions. Your planter should be around 75 percent filled of new dirt. Make a few-inch-deep depression with your finger. After inserting the cutting into the depression you created, top over the container with extra soil. To secure the cuttings, compact the soil around them. You should water your cuttings thoroughly until the soil is evenly saturated. You must make sure the pot you select has a drainage hole. Your cuttings risk getting overly damp and starting to decompose before they can properly root if water cannot escape.

Pro tip: to encourage development, give your recently planted cuttings a boost in humidity. To assist maintain humidity, place a large glass jar, cloche, or plastic freezer bag over your pot.

If everything goes as planned, you ought to have brand-new roots in a few weeks. Send us pictures of your plant reproduction! Put a hashtag on Instagram and show us those roots!