Fortunately, trimming a monstera is not too difficult. Since they are a hardy plant, they don’t need to be meticulously pruned. In other words, even if you don’t perform a great job, your plant will probably be alright.
You’ll want to remember a few things, though:
1. Put on gloves. When pruning or propagating your monstera, be sure to use protective gloves because the sap is poisonous and can cause severe skin irritation.
2. Use a tidy, sharp instrument. You can avoid crushing or damaging the stem by using sharp pruning shears or a knife to make the cut. Your plant is also shielded from hazardous microorganisms by clean tools. Bacterial diseases can even spread to your other plants and are difficult to treat. (Protect your monstera from insects, fungi, and bacteria with our Houseplant Leaf Armor!)
Instead of slicing the stem off, just give it a good snip or chop while cutting. The cleanest cut will be made as a result.
3. If you can, prune in the spring, especially if you want to promote growth. Growth spurts occur in the spring and summer for the majority of plants, including monstera. Pruning in the spring will yield the best benefits and hasten the recovery of your plant. You should prune in the spring because that is when your cuttings will grow the fastest if you intend to propagate them.
4. Arrange the slices. Starting at the base of the stem, remove any outdated or diseased leaves.
Cut where you want the plant to grow if you are pruning to promote growth. Make a top cut if you want it to grow higher.
When the time comes to actually trim your monstera, keep in mind that pruning promotes growth so choose where to make your cuts. You can safely reduce the plant’s size if you’re pruning to manage your monstera’s size. Just remember that it will eventually need to be done again because it will grow back.
5. Be sure to cut below a node if you’re propagating. Don’t be concerned if you’re only trimming to reduce the size of your plant or get rid of dead leaves. However, if you want to grow your cuttings from them, make sure that they have a node, which is a tiny knob that develops on the stem opposite a leaf. When your cutting begins to grow, these will subsequently develop into aerial roots!
Try our new Houseplant Propagation Promoter!
6. Prevent unintentional proliferation. When you’re done pruning, be careful to dispose of your cuttings in the trash if you’re not going to propagate them because if you place them in a compost pile or somewhere else where they can root in the earth, they’ll start to grow roots.
I’m done now! Don’t be afraid to prune your monstera; it’s an essential yet easy component of care for this plant. This plant develops rapidly and bounces back quickly from pruning. Good fortune!
How can a Monstera be made bushier?
As long as it’s actively developing, monstera deliciosa can be easily propagated at any time of the year. They make excellent propagation candidates because of how quickly they develop, making it possible to give them to friends or add more plants to your home. There are various ways to spread monstera. This is how:
How to Propagate Your Monstera Plant via Leaf Bud Cuttings
Step 1: Fill a container with fresh all-purpose potting soil large enough to handle three or four cuttings.
Step 2: Take a healthy monstera stem from the mother plant and cut a piece off with a clean, sharp blade. Pick a section of the stem with several leaves.
Step 3: Separate that stem into a number of leaf-containing pieces. Aerial roots may also be affixed to segments.
Step 4: Insert three or four stem segments into a single pot. In the new container, this will produce a bushy, full appearance. Before planting, the stem segments can also be propagated in water for a few weeks. The junction between the leaf and stem is where new growth will appear.
How is Monstera clipped?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
How is Monstera pinned up?
Next, position the pole so that it lays between your plant and the plant pot’s rim.
Ensure that the stake’s bottom touches the pot’s bottom. This gives the pole stability and keeps your Monstera plant from causing it to topple over.
Firm the soil around the pole
This is a critical step because if the soil around the stake is not firmed up, the stake will become unstable and be vulnerable to squirming or toppling over when your plant is bearing down on it. It’s crucial to anchor the pole in its current location for this reason.
How can you keep Monstera from growing too long?
Like all plants, a Monstera deliciosa can become sparse and lanky from a lack of sunshine. The issue itself is simple to identify, but how can you put a stop to it? How do you mend a Monstera that is “leggy” and what does that mean?
When a Monstera doesn’t receive enough light, it becomes leggy and becomes elongated and sparse. Once a leggy Monstera has been identified, it can be treated by cutting back the leggy growth and making sure the plant continues to receive enough sunshine going ahead.
It can be frightening whenever your plant starts to appear less than healthy. Leggy, fortunately, is a simple problem to resolve. So don’t be afraid! Continue reading to learn what the issue is, how to resolve it, what kind of light a Monstera requires, and how to accommodate Monsteras in low-light conditions.
How should a leggy Monstera be pruned?
Your objectives will determine how to prune a Monstera plant indoors to promote growth. A different approach is taken when pruning a few dead leaves vs attempting to regulate an overgrown plant. Similarly, pruning your Monstera plant with the intention of propagation requires a little more care.
Removing yellow or dying leaves
Older leaves naturally turn yellow and die as your Monstera plant develops and is more mature. This is very typical, and a few yellowing leaves are nothing to be concerned about (although if more than a few Monstera leaves are turning yellow, that may be cause for further investigation). However, it’s crucial to frequently cut off old and discolored leaves from your Monstera plant if you want to maintain it happy and healthy.
When pruning indoor Monstera, use sterilized clippers or a sharp knife to cut the leaves at the main stem. Make a clean cut to separate the leaf stem from the plant by following it back to the main branch. The leaves cannot be rooted as a new plant, so dispose of them in the trash or compost bin.
Controlling or shaping an overgrown Monstera plant
If left alone, monsteras can grow quickly and get out of control. If allowed to expand wildly, aggressive lateral vines may turn disruptive and ugly. You can clip stray tendrils and point new growth in the direction you desire to keep your overgrown Monstera Deliciosa plant in good shape.
Before beginning to prune your Monstera, note the problematic vines. Return to the main stem by following the vine. Cut the plant cleanly just above the main stem. Avert injuring or cutting the stem.
If you want to root or propagate your Monstera plant, you can utilize these cuttings, but you must trim them once more 1/2 inch below a node.
Root pruning
Giant Monstera plants can be kept in check and their development slowed down by using a process called root trimming. Even while it could seem a little intimidating, it is simple to execute and, when done correctly, will enhance the health of your plant.
Examine the roots by taking your Monstera plant out of the pot. There will be a single main root, and smaller lateral roots will branch out of it. The main root should remain intact while the lateral roots are reduced by one-third.
If the roots are tightly coiled, carefully peel them apart. Limit the length of the lateral root cuts to no more than one-third of its length. Trimming off any damaged or discolored roots at this time is also a good idea.
Pruning to propagate Monstera
Stem cuttings of monsteras can be used to create new plants by being inserted into moist potting soil or a vase of water. However, for the cuttings to root, at least one node is required. Therefore, when taking node cuttings, you must be cautious.
Choose a vine’s tip that has at least one or two strong Monstera leaves attached. Returning to the stem, find a leaf node. It is at the node that all new growth starts. It could form a ring around the stem and appear thicker.
Use a sharp cutting tool to make a precise cut 1/2 inch below the node. Cutting with a dull blade should be avoided since it might harm tissue and bruise the stem.