You folks love talking about plants, so I’m starting to wonder what I’m doing here! It was essential that I set aside significant space on the site for it because there isn’t enough interior styling content, project updates, or clothing inspiration that I can share with you guys to compare to what occurs when I start talking about plants.
Let’s talk about one of the most fascinating indoor plants to maintain, the split leaf monstera, since substantial space is a concern.
Monsteras prefer indirect light that is moderately bright. Their leaves may become scorched by excessive direct sunlight. Mine is elevated off the ground in a south-facing window of our house to get the most indirect light.
The holes in the plant’s broad, emerald-green leaves are one of its most noticeable symptoms. Hence, the plant’s moniker, “Swiss cheese.” Monsteras grow holes in its leaves to allow more sunlight and rain to reach the remainder of the plant and its roots in their natural environments, which are the tropical jungle floors! However, not every monstera leaf will be punctured. This is a quality that the plant acquires as it gets older.
As they develop, monsteras resemble vines and have a propensity to climb the vertical surfaces surrounding them. Many plant owners enjoy giving them stake as they mature to promote their upward growth. Although I haven’t had to do this yet, as it develops, things could change.
Additionally, there are constantly numerous prospects for new growth because it spreads like a vine. Each new leaf’s end sprouts a new shoot that continues to grow. Once the new leaf grows out, the vine produces a node. These nodes eventually develop into aerial roots, which the plant uses to cling to and climb vertical surfaces in many, but not all, cases.
Developing a Monstera
My monstera is rather mature and in excellent health, so I have a lot of choices when it comes to choosing cuttings to reproduce. I can either cut a full cutting with 4-5 leaves and nodes on one vine, or I can cut several little cuttings with just 1-2 leaves and nodes. In this specific case, I chose the second course of action.
To avoid contaminating the parent or the cuttings when getting ready to take a cutting, make sure you have a clean knife or pair of sheers and that they are sharp. Before using, carefully wash with soap and water and perhaps even rub with a little rubbing alcohol.
Can a Monstera be grown from a leaf cutting?
Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.
Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.
How long does it take a Monstera cutting to grow?
It takes patience to propagate. After 3-5 weeks, the roots from your cuttings should start to grow. The new roots should be at least an inch long; this is the primary thing you want to check for. Your cutting is prepared to be planted into a pot once it develops several roots that size.
How is a Monstera cutting rooted?
The Swiss Cheese Plant, Monstera deliciosa, can be multiplied in a few different ways. I assembled my instruments, started by slicing off one enormous stem, and decided on the rooting technique.
I used the fact that the section I chose had an aerial root and node (see Step 1) as a chance to hasten the process by inducing the root to grow. I chose a portion of Monty that had at least two leaves in addition to two stalks, generally known as petioles.
You might be tempted to start a Monstera from a single leaf. I tried it, but it won’t work. For propagation to occur and be effective, a node or root must be present. Like cut flowers, a stem and a leaf by itself will do perfectly well in a glass container, but without roots, they will ultimately turn yellow and regretfully die (like cut flowers).
I took the following actions to make sure Monty Jr. grew up big and strong:
Locate the Node
Locate the node by looking around around your monstera. This tiny nub is crucial and will be the ONLY method you can spread after it has roots. It is situated at a petiole intersection and resembles a plant pimple in appearance.
Cut the stem off
I sliced the stem to include this aerial root or node and leaves in one by using sharp sheers (I like them). I rinsed the cutting under filtered water after removing it from the main plant.
Snip more leaves
This would be the time to remove any additional leaves if there were any. Remove any extra leaves if there are more than two to three.
Water is required.
I cleaned it and put filtered water halfway into a glass jar (no cap required) (chlorine is not good eats for young plants).
Position the Cutting
I placed the cutting carefully so that it would stay upright. To keep the plant centered, you can always try a rig using twist ties, acquire a taller jar (like I did), or lean the plant on the jar lip.
I gave Monty Jr. fresh water and rapidly rinsed the roots every few days as so. I noticed positive developments starting to occur after about a month. Both that little node (remember that little nub?) and the aerial root, which would later serve as the plant’s backbone and anchor it in the soil, began to grow roots.
Remember, I had this surgery in the middle of the summer, so putting Monty Jr. in my hot, sunny, screened-in porch right away was ideal. Since plants tend to become somewhat inert and hibernate-like throughout the winter, I honestly wouldn’t try this anyway. Don’t bother them and act decently.
Before planting, I gave Monty Jr. a full two months to relax in his bath. I selected one of my tried-and-true plastic pots, which are strong and ideal for young saplings. I placed Monty Jr. in his new house, filling it lightly without crushing the earth down. He remained outside for the remainder of the summer and the beginning of the fall, but as soon as the temperature dropped at night, I brought him inside. I took extra precautions since I assumed that fresh cuttings would be more susceptible to temperature changes. Am I right, then?
After demonstrating my competency as a parent with the second cutting I performed a few weeks later, I tried my hand at an air layering technique. Following Monty Jr.’s success, Monty Jr. II (yep, it should read Monty Junior the Second) was separated from Monty in the same manner, but this time he was wrapped in moss rather than submerged in water. By forcing the mother plant’s roots to form, you can cut the stem after air layering.
How to Air Layer
- Step 1: Put the hardware together. You’ll need sphagnum moss, plastic wrap, and twist ties (note: avoid using dyed moss as it will get all over your hands when wet and stain everything for days).
- Step 2: Proceed to cut a slit along the monstera stem, taking care to include the node (or nub) that will serve as your aerial root. All of this should be underneath the incision.
- Step 3: Apply moistened sphagnum moss to the plant and wrap the node, any roots, and the incision.
- Step 4: Use plastic wrap to wrap the bundle and twist knots to fasten it. This won’t be wrapped forever, and in a few months, you should start to see roots emerge from the node. You must remove the root package and remoisten the moss every several days. I believe a spray bottle works best for this.
- You’ll see on the plant in the moss package that huge roots have started to form after a few months. Cut the stem completely off where the cut was, then start planting!
Can a cutting of a Monstera flower in water?
How to grow delicious monstera. You will require a Monstera deliciosa plant, cutting-edge scissors, and either a pot of soil or water.
Pick a stem to cut.
Pick a cutting of stem that has numerous nodes or leaves. While some aerial roots are useful, they are not necessary.
Pick a growth medium.
Your cutting can be multiplied in either water or soil. Water functions equally well as dirt and has the advantage of making progress monitoring simpler.
- Bright and cozy
- Keep wet and fresh.
If growing in water, make regular water changes. Give it regular waterings if it’s growing in soil to keep the cutting damp.
Disregard it!
If you took the cutting during the winter dormant phase, it can take some time for any growth to develop.
Pot up
When you spot established new growth, such some roots and a leaf that hasn’t fully expanded, pot it up in a suitable container.
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
How much time does Monstera take to root in water?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
Is it possible to grow Monstera in soil?
Many people think that water propagation is the best or even the sole method for growing a new Monstera deliciosa from a cutting. However, a Monstera cutting can be grown in soil without first establishing the roots in water. Both approaches are effective, though many plant owners pick the approach they believe gives the most benefits.
It is simple to grow Monstera deliciosa from seed in soil. Simply take a healthy Monstera cutting with at least one node, and plant it into potting soil with good drainage. By using soil to root Monstera cuttings instead of water, the subsequent step of transferring the rooted cutting into soil is avoided.
People prefer to grow their plants in soil rather than water for a variety of reasons. Some people might discover that employing soil propagation is a simpler process or that their Monstera produces new growth more quickly. Some people have curious cats that won’t leave a water container alone. Additionally, some owners of indoor plants simply want to experiment with new methods of growing this well-liked plant.