, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
If I clip my Monstera, will it grow again?
What do you do now that you have a clipping from your Monstera plant? Will the plant ever produce those lovely, large leaves again, or will it perish forever?
Well, don’t worry; the Monstera has magical abilities and will regenerate all of its lost stems and leaves (at least if you take good care of it)!
The Monstera will regenerate a new growing point from the closest node where the cut was made after being made. The portion of the plant that you removed will have fully recovered within a few months.
Light, water, soil, humidity, and fertilization are just a few examples of the variables that affect how quickly a plant will develop.
Where can I cut regrowing Monstera?
You must make an incision at the internode, at least two inches below the node, if you wish to propagate your Monstera. New roots can grow because of the space that is provided.
Remember that when you cut below a node, you are leaving a segment of stem that is unable to produce new stems or leaves.
Instead, make a clean cut above the node when shaping a plant or removing dead leaves. The same direction will be followed by new growth.
Greater surface area will be possible with a 45-degree angle cut compared to a straight cut, enhancing water uptake.
As every cut causes a wound to the plant, avoid overpruning. Therefore, if your plant is overcrowded, identify the nodes that are producing the most stems and leaves and prune those places. In this manner, you can remove a lot of material without raising your plant’s danger of shock or infection.
Should you cut the aerial roots?
Roots that develop above the ground as opposed to underneath it are known as aerial roots.
In the wild, Monstera uses aerial roots as support to climb taller trees so they may get more sunshine in the upper canopy.
They are not aesthetically pleasing and can grow to be very lengthy. You could wish to take into account pruning them if they are out of control.
Make sure to trim aerial roots as close to the node as possible without actually cutting the node. Cutting too deeply may harm the stem or nodes, which can raise the risk of illness.
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
How do I cut a plant for a cutting?
Softwood cuttings should be taken between mid-spring and early summer. From the middle of fall through the middle of January is when hardwood cuttings are taken.
How to take softwood cuttings
- Fill your pots with compost and water them to get them ready for the cuttings before you take a plant cutting.
- Early in the day, when the plant stems are still wet, take cuttings. Use cuttings as soon as possible after placing them in a plastic bag to prevent drying out.
- If you want to take a cutting, pick a sturdy side shoot that has no flowers and cut a portion that is 5 to 10 cm (2-4 in) long, just below the leaf junction.
- The lower half of the cutting should be completely leafless, and the growing tip should be pinched off.
- Apply hormone rooting powder to the cutting’s bottom end. This lessens the chance of bacterial infection while assisting the cutting in growing roots.
- Make a hole in the center of the compost with the dibber or a pencil, then insert the cutting so that the lowest pair of leaves is just above the soil’s surface. Around the cutting, compact the compost.
- When all of the cuttings have been potted, name them, and either place them in a propagator with a bottom heat of 18–24 oC (64–75 oF) or cover each pot with a clear plastic bag and place it in an area with bright but indirect light. For ventilation, open the propagator vents every day or take the plastic bags off once a week for ten minutes.
- Water the compost frequently to keep it moist but not soggy. Depending on the plant, the cuttings may take six to ten weeks to take root. Examine the drainage holes in the pots for any indications that the roots may be showing.
- After the cuttings have taken root, they should be “hardened off” for two weeks by being kept inside at night and placed outside during the day.
- Replant the cuttings in larger pots once they have hardened off so they can continue to grow until they are big enough to be planted outdoors.
How to take hardwood cuttings
- In the fall, when the plants have lost their leaves and are dormant, take hardwood cuttings. When it’s cold outside, avoid taking cuttings.
- Prepare a small trench outside in a protected area if you intend to take numerous cuttings. This will house the cuttings for the most of the following year. Lay a layer of sand at the bottom of the trench, then backfill it with soil that has been amended with compost to ensure proper drainage. Use containers filled with a 50/50 mixture of multipurpose compost and grit if you only need a few cuttings or don’t have room for a trench.
- Choose a sturdy, pencil-thick woody shoot that has grown this year and cut it off just above the shoot’s base to take a plant cutting.
- Cut the shoot into lengths of 15–30 cm (6–12 in) after removing the tip. At the top of each length, make a slanted incision slightly above a bud. This deflects rain from the cutting and serves as a helpful cue as to which end is which.
- At the bottom of each cutting, make a straight cut right below a blossom.
- Each cutting’s lower end should be dipped in hormone rooting powder.
- So that one-third of each cutting is still visible above the soil’s surface, place the lower ends of the cuttings into the trench or pots. In trenches, space cuttings 15 cm (6 in) apart.
- Till the fall after, keep the cuttings in the trench or pots. Water during dry spells to prevent the compost from drying out.
- The cuttings can be replanted in their ultimate locations once they have developed roots.
What are the best plants to take cuttings from?
There are many appropriate plants to pick from once you understand how to take a cutting from a plant. Many delicate plants, including pelargoniums, petunias, verbena, argyranthemums, and osteospermums, respond best to softwood cuttings. Many deciduous shrubs, such as lavender, rosemary, forsythia, fuchsias, hydrangeas, lavatera, and buddleja, allow you to take softwood cuttings as well.
Most deciduous shrubs, roses, climbers like honeysuckle and grape vines, and fruit bushes like fig, gooseberry, redcurrant, and blackcurrant do well with hardwood cuttings.
It’s simple and pleasurable to add more plants to your yard by taking plant cuttings. Why not give it a try?
Do I need to trim my Monstera?
The Monstera deliciosa is a stunning climber that is a native of the jungles of Central and South America. It is aggressive and quick to develop. You might be unsure of how, if, or when to prune your Monstera due to how quickly they can grow to be large.
Monsteras require routine pruning. Pruning promotes growth and makes the plant healthier overall. You may regularly replenish your supply of new Monsteras by correctly taking cuttings from the plant and then propagating them. Prior to the Monstera’s growing season beginning in the early spring, pruning should be done.
If you’re not very experienced with houseplants, the prospect of chopping into your prized Monstera might give you the chills. But don’t worry; trimming is easy and beneficial to plants. Continue reading to learn how to prune your Monstera’s various components, why you should, and how to propagate cuttings.
Pick your timing
The optimum time to divide or propagate your monstera is in the early spring because that is when it grows. They’ll have a better chance of overcoming root stress and resuming growth.
Water before you split
Before splitting the root ball, it should be well-hydrated. Give the roots a good soak a week before you carry out the deed so that water begins to flow out of the bottom of the pot. (Your pot has effective drainage, correct?)
Make the split
Carefully tip the pot on its side and slip the plant out when you’re ready to split your monstera. To avoid breaking anything, you might need assistance holding the plant or pot.
Use a garden shovel to gently encourage the plant out if it won’t come up on its own. Do not pull the plant out of the pot under any circumstances! There is no way you want to break any stems or leaves since they won’t grow back.
Once the monstera has been removed from the pot, divide the root ball into two or more plants using a sharp, clean knife. To ensure that each new plant has lots of roots and stems, look for natural sections and divisions in the existing plant.
This is something you kind of have to eyeball and look for any locations where the plant has already divided up. This will guarantee that the plant will rapidly begin growing after the split has healed.
Plant the new monsteras
It’s time to move the individual plants into their new pots after you’ve divided your monstera into two or more plants.
Perhaps you need containers that are smaller than the one the large plant was in. Select containers with sufficient drainage that are 2-4 inches wider than the new plants’ roots. Plant in a soil with peat, such as our specialty monstera soil, that drains well.
When the plants are in their new pots, give them some water, and position them somewhere with bright, indirect light.
To promote recuperation and new development, you can begin fertilizing the plants around a month after you separate them!
When your Monstera grows too large, what should you do?
Monsteras don’t mind if their roots are a little constrained in terms of pot size. They only require repotting around every two to three years. You can repot your Monstera into the same pot rather than size it up if you want to prevent it from growing any bigger. You are still able to feed your Monstera nutrition while also telling it to stop growing further.
In order for your plant to retain water for at least a few days, make sure there is enough potting soil surrounding the roots. The remaining soil in a pot that is completely filled with roots may quickly dry up and harm your plant.
In this instance, consider root pruning. Although it can be unsettling because we always take care to protect the roots of our plants, they can withstand some harsh treatment. One of the greatest ways to maintain a Monstera in the same size pot without endangering the plant’s general health is to trim back roots.