The quick answer is that leaves won’t regrow on the stem from which they fell. But it’s not always a bad thing. New leaves will sprout from the top of your succulent.
Leaves falling off
Why are your succulents losing leaves? Issues with watering are the most frequent cause. If the leaves receive too much moisture, they may expand, turn mushy, and eventually fall off. Overwatering causes leaves to drop off, which are soggy and mushy, and the stem may look puffy.
Solution: Delay watering until the top inch of soil feels completely dry. Make sure the potting soil drains adequately and that the plant doesn’t sit in water for an excessive amount of time. Repot the plant and replace the soil with one that drains effectively if the wrong potting mix was used.
Before transplanting and providing fresh water after repotting, give the plant some time to recoup and mend. When watering, allow extra water to drip out of the pot’s openings. If the pot doesn’t already have drainage holes, think about drilling some or changing your watering methods to avoid overwatering.
Extreme heat can also cause leaves to fall off. Succulents adapt by shedding their leaves during periods of extreme heat or drought to help conserve energy and retain their water supply. Even though this is a typical natural reaction, there are things you can take to lessen stress in your plant.
In the event of a heatwave or drought, move the plant to a more shady position away from the direct, full sun. Additionally, the plant might require more frequent watering under these circumstances. When the top inch of the soil seems dry to the touch or as needed, increase irrigation.
Watering issues
Watering problems might cause the leaves to become yellow. Both overwatering and underwatering might result in yellowing of the leaves. Pay attention to additional developments involving your plant.
The plant is being overwatered if it receives plenty of water and its leaves are yellowing, mushy, and bloated. The likelihood of the plant being underwatered increases if the leaves are yellowing, shriveling, and wilting and you are aware that you have not watered the plant in a while.
Adjust watering methods as needed. Reduce your watering frequency and wait until the soil is completely dry between applications if you think the plant is being overwatered. Water the plant more thoroughly if it’s being neglected. The majority of succulents appreciate regular watering until extra liquid leaks from the pot’s perforations. Do not rewater until the earth has dried out.
Lack of nutrients
Insufficient nutrients can cause leaves to turn yellow. The majority of commercial succulent potting soil contains compost or fertilizer in addition to the soil. For a long time, the plants can survive on those nutrients.
These nutrients eventually need to be brought back in because of the frequent watering that flushes them out of the soil. Repotting the plant in new potting soil or feeding the plant are two ways to supply nutrients.
Solution: Fertilize the plant or repot it in a good, well-draining potting mix. Use a fertilizer combination made especially for cacti and succulents or a well-balanced fertilizer made for houseplants.
Because they are not heavy feeders, cacti and succulents don’t need a lot of fertilizer. Reduce the recommended fertilizer dosage to 50% from what is stated on the container. During the growing season, feeding once every two weeks should be plenty.
Watering Issues
Underwatering is the primary cause of withered leaves. The plant probably needs water if the leaves start to look withered and shriveled, which usually happens to the upper leaves of the plant first. If you have been lightly watering your plant and you see that the leaves are beginning to shrink, you likely have an underwatering issue that is readily fixed.
Solution: Give the plant more frequent and thorough waterings. Succulents require extra water during the growing season and during heat waves. When watering, allow water to drain from the holes and wait until the soil is dry before watering again.
The leaves may also shrink as a result of overwatering. However, excessive watering can cause leaves to seem limp, weak, and fall off rather than wilt and shrivel. The stem may also seem swollen.
These are images of plants that had been overwatered and had lost the majority or all of their leaves. The leaves had mold and were mushy and rotten. Also squishy are the stems.
Solution: Water less frequently and be sure to let the soil dry out between applications if you suspect overwatering. Before rewatering, the top inch of the soil must feel dry. Repot the plant in a well-draining potting soil if it is in the incorrect potting mix.
Before transplanting and watering the plant once again after repotting, let it dry out for a few days to give the plant time to recuperate and mend from overwatering. To check for moisture in the soil and the air, you can use tools like hygrometers and moisture meters. Please visit my resource page to see my suggested product list.
Brown Leaves or Dark Spots on Leaves
Sunburn or sun damage is the most frequent cause of brown or black blotches on the foliage of your succulents. The plant may experience this if it is exposed to unfiltered full sun or if it has just been transferred to a sunny site without having had time to acclimate. During extremely high heat waves or droughts, even plants accustomed to full sun may have brown leaves.
Solution: Move the plant to a more shaded area or offer more shade while it’s hot outside. To gradually acclimate a plant and prevent sun damage, gradually increase the amount and intensity of sunlight it receives over time before bringing it outside or to a sunnier place. To prevent burning, avoid placing young plants or plants that have recently been propagated in direct sunlight. Please visit my resource page if you would want product recommendations for shade cloths and outside sun protection for succulents.
Dead Lower Leaves
As the plant grows and develops new leaves from its core, the lower leaves inevitably wither and die. Dead leaves either fall off on their own or are readily plucked off.
To prevent insects and bugs from hiding in the soil, remove any dead leaves off the plant or pick up any dead leaves that have fallen into the ground.
Stems Stretching Out
If the plant doesn’t get enough light, the stems will sag or the entire plant will begin to etiolate. A plant’s natural response to darkness is called étiolation.
The plant’s stem and overall shape are extending towards the direction of the light source. The stem may appear to be extending, and the spacing between the leaves may appear to be widening. When in this condition, the plant’s growth is prone to being stunted.
Solution: Move your plant to a more sunny area. The greatest sunshine will enter a room through a south or east facing window. If you’re transferring your plant to an area with more sunlight, do so gradually to prevent sun damage.
Avoid any abrupt alterations that could startle your plant. For instance, avoid transferring the plant from a low-light environment indoors to direct sunlight outdoors right quickly. Increase the plant’s exposure to sunshine gradually in both quantity and quality.
A grow light is an excellent choice to provide more light for those inside regions that are difficult to access if you are unable to supply more sunlight for your indoor succulents. If you move your plant to a new area, use a grow light, or make any other changes, pay attention to how it responds. Adapt and modify as necessary.
The above-mentioned irrigation problems might cause leaves to grow malformed. Either too little or too much water is being given to the plant. If there is too little, the leaves begin to shrivel. If the leaves receive too much moisture, they become limp and droopy and may even wrinkle.
Lack of nutrients in your plants is another typical explanation. The potting mix your plant is in may no longer have enough nutrients for your plants if it has been in the same pot for more than two years or more. The leaves may start to seem deformed and occasionally turn yellow or discolored if this is the case.
The majority of commercial succulent potting soil contains compost or fertilizer in addition to the soil. For a long time, the plants can survive on those nutrients. These nutrients eventually need to be brought back in because of the frequent watering that flushes them out of the soil.
Lack of nutrients is causing these plants to struggle. Their leaves are wilting and changing color.
Solution: If you think your plant’s misshaped leaves may be the result of hydration problems, try adjusting your watering methods and monitoring how your plant reacts. A thorough watering will frequently resolve the issue without taking too long if the plant is drowning and its leaves are withered. The degree of the damage determines how your plant will respond when water is withheld if it has been overwatered. If not, you might need to replace the soil your plant is sitting in or there might already be root rot. The plant might recover rapidly.
If the plant needs more nutrients and has deformed leaves, either fertilize it or repot it in a suitable, well-draining potting mix. Repotting the plant in new potting soil or feeding the plant are two ways to supply nutrients. Use a fertilizer combination made especially for cacti and succulents or a well-balanced fertilizer made for houseplants.
Stunted Growth
Lack of light might result in stunted growth. Without enough sunlight, plants deteriorate and can’t develop properly. The stems begin to sag, and there won’t be much new growth.
Solution: Move your plant to a more sunny area. The greatest sunshine will enter a room through a south or east facing window. If you’re transferring your plant to an area with more sunlight, do so gradually to prevent sun damage. Avoid any abrupt alterations that could startle your plant.
For instance, avoid transferring the plant from a low-light environment indoors to direct sunlight outdoors right quickly. Increase the plant’s exposure to sunshine gradually in both quantity and quality. When moving your plant, observe how it responds and make any necessary adjustments.
Stunted growth can also result from nutrient deficiency. It could be time to re-pot or add fertilizers if your plant has been in the same pot for more than two years. The majority of commercial succulent potting soil contains compost or fertilizer in addition to the soil.
For a long time, the plants can survive on those nutrients. These nutrients eventually need to be brought back in because of the frequent watering that flushes them out of the soil.
Solution: Fertilize the plant or re-pot it in an appropriate, well-draining potting soil. Repotting the plant in new potting soil or feeding the plant are two ways to supply nutrients. Use a fertilizer combination made especially for cacti and succulents or a well-balanced fertilizer made for houseplants.
How much time does it take a succulent to regrow?
Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
Succulents can they heal themselves?
Succulents are a preferred option for many individuals due to their hardiness as a plant. Given the correct conditions, it can develop new roots, and it is much simpler to propagate than other plants. In fact, succulents can develop on their own if the soil is sufficiently damp! Sadly, it doesn’t always happen, therefore you have to foster a favorable climate for it to flourish.
Succulents are tough plants, but it doesn’t make them unbreakable or immune to damage. There are many things that can harm these plants; anything from neglect to over-care can result in fading, tension, or injury. Since I’m very certain that you already have a broken succulent on your hands, let’s fix it first before moving on.
Method #1: Leaves Falling Off
When leaves begin to fall, for example, we can say that a succulent is broken. There are a number of causes behind it, but that doesn’t mean you can’t save your plant. Falling leaves are actually just the beginning for a new succulent—how it’s they spread. It will develop into a new plant if you simply provide the right conditions for it to flourish.
Gather the leaves as soon as you notice them starting to fall from the plant and store them away for three days. The only way for the leaves to establish roots is through this process, which makes it essential. To place these leaves, you’ll also need a fresh pot and cactus soil. As long as it has adequate drainage to drain excess water from the soil, any container will work.
Succulents require moisture in the soil to flourish, so keep that in mind. However, this does not obligate you to water the plant in the pot to the same extent as you would other plants. Injurious amounts of water can inhibit new roots from forming on leaves. You only need a tiny bit of moisture. It should be sufficient to spray the surface every other day to produce the ideal conditions for succulents to flourish.
Here is a simple instruction to showing you how to use a damaged succulent’s dropping leaves to salvage it:
Unfortunately, not all succulents are created equal, and not all of them can be multiplied using leaves. Only those who possess a Stonecrop or Copperleaf can use this technique. You cannot utilize fallen leaves to grow Aeoniums or Sansevieria. You must remove a fresh leaf from the stalk if these are the plants you have. You can just plant it on a cup filled with damp soil rather than letting it dry out.
The steps are the same, but you’ll employ the leaves in a different way. Some succulents must get callused before they can develop roots, while others are resilient enough to continue to thrive even after being cut and replanted. Making sure that the soil has the right amount of moisture—neither too little nor too much—is essential if you want to effectively propagate succulents.
The leaves will drop off even with careful maintenance. Because certain succulents need it for reproduction, it is typical. You don’t need to worry about it, but it would be better to take good care of it to promote its development. Simply check that the soil can absorb enough moisture, the container you’re using has sufficient drainage, and you’re only giving it little quantities of water every few days.
Method #2: Stem Decapitated
You can’t always utilize fallen leaves to keep a succulent branch from breaking off. Even some plants cannot spread through the leaves. If you’re taking care of a succulent that looks similar, you might need to cut off a stem from the plant and utilize it to sprout another one. However, it won’t enough to just remove the stem and plant it in a new container.
If your plant utilizes a stem to reproduce, you must first cut off a portion of the stem and store it until it becomes calloused. The new roots will form in this area. Even in the ideal conditions for succulents to develop, your stem will just wither away without this callused portion.
The stem will develop a callus in just three days, at which point you can bury it in cactus soil. Unfortunately, establishing roots from a succulent that has had its head taken off takes time. It moves at an agonizingly slow pace. It requires a lot of patience because you could not even see effects for a few weeks, and some things might even take months to take root!
Another essential step when using a cut-off stem is to ensure that it doesn’t receive direct sunlight—instead, it needs indirect sunlight. In addition, you should wait three weeks before watering or spraying anything into the soil’s surface. To begin forming roots, the stem must go through this procedure.
You can repot the plant in a better container with sufficient drainage after the stem begins to develop roots. You have now successfully salvaged a broken-off succulent and can resume your regular succulent maintenance. There are still some things you can do to save the old plant, so don’t worry.
Method #3: Leaves Cut in Half
What if the leaf is sliced in half? is the most frequent query I receive. Yes, a fallen leaf with the portion still attached to the stem can develop roots. Roots can also form on the plant stem that has been severed. But if the portion of the leaf attached to the stem is already rotting or has entirely dried out, will it still be able to produce roots?
As you are aware, succulents have a special quality that enables them to develop roots even when the stem-connected portion is already decomposing. Although you must get rid of the rotten component, the procedure is identical to producing roots from leaves. It may even take a month or two for the leaf to begin producing roots because of how long this process takes.
The quickest approach to save your succulent, no matter how long it takes, is to create a new one from the pieces of a broken one. At initially, these new succulents won’t need a lot of maintenance. It will be simple for you to save a broken-off succulent if your soil meets the requirements. Some people are even starting farms utilizing the methods I’ve shared with you!
Method #4: Repotting the Old Plant
The first three techniques are the ones that people use the most frequently to rescue a broken-off succulent. They are able to have more as a result of these techniques in addition to salvaging what little of their plant is still there. Repotting a damaged succulent is another approach to salvage it, and any issues your plant is having may simply be a sign that it needs a little extra care.
You can check its health and the soil’s quality by repotting. A number of factors can negatively impact the health of your plant, but the best method to save it is to remove rotten roots and make sure the soil you’re using is suitable for it.