When succulents receive too much water, their leaves might expand and become floppy.
A potted succulent plant’s softened leaves are a surefire sign that the soil is too damp for healthy growth.
Succulents typically go dormant and like to be submerged throughout the winter.
Watering too much during these months can result in soggy, withered leaves.
How can a mushy succulent be saved?
Yes, I am aware that it seems illogical to remove extra water from the soil, but bear with me. This is the justification. Too much water has already put the succulent under stress, and exposure to sunlight makes matters worse. Direct sunlight is a big no because most succulents require brilliant indirect light.
Place the succulent that has been overwatered somewhere dry and bright, but out of direct sunshine.
2. Permit the roots to breathe.
Cut off any brown or black roots as they are already rotting. Dig the succulent out of the ground and remove any excess soil that has become stuck to the roots. Place the plant on a mesh or other strainer until the roots have had two to three days to air dry. Replant the roots in the pot once they have dried completely.
Remove the entire root system and any puckered, spotty, black, or brown stems if the roots are entirely rotted. The succulent stem can be buried in the ground for propagation.
Keep the overwatered succulent on a mesh screen or other strainer until the roots have had two to three days to air dry.
3. Modify the ground
You might not need to entirely alter your succulent if it is already rooted in homemade or commercial succulent soil. Algae (green living matter) typically grows on soil that is too wet. If so, it is your responsibility to remove all of the top soil from the area around your plants and replace it with new succulent soil.
What does a succulent that is mushy mean?
Okay, so we’ve talked a lot about succulents that are dry, but what about those that have received too much water? Well, if you recall, overwatering essentially causes those particular balloon-like cells to overfill and burst, leading to damaged cell structures and rotting leaves and roots.
Discoloration and a change in the shape of the leaves are the first indications of overwatering to look out for. The leaves will turn transparent, floppy, and squishy, and unlike those that have been under-watered, they won’t be retrieved by the plant. It won’t be simple for succulents to recover from this state, but they can. Taking leaves and cuttings to root and grow new plants is an alternative to rescuing the overwatered succulent.
Should you remove succulents’ squishy leaves?
Depending on the severity of the damage, your plant might still be salvageable. The easiest strategy to save your plant is to chop off or remove any dead, mushy parts of it while keeping everything else that still appears to be green and healthy. Let the cuttings dry for a few days before planting them in a potting mix that is suited for propagation and has good drainage.
Eventually, the cuttings will take root, and a new plant will grow. I’ve taken leaf or stem cuttings to save numerous plants. Sometimes a dying plant’s only remains are a few leaves.
And that’s sufficient to germinate a few young seedlings. Succulents are fantastic plants with a remarkable innate ability to endure anything is thrown at them.
How long does it take a plant that has been overwatered to recover?
If you follow the above instructions, your overwatered plant will typically recover in 714 days. It can take more time if there was significant damage. However, if there were sufficiently strong roots, results are frequently seen in as little as two weeks.
After repotting, give the soil a light watering and wait until it is dry before adding more. Avoid watering the plant excessively like you did previously, especially now!
How can wet soil be dried?
It is not difficult to dry out soil that has been overwatered. It only requires a little thought and work.
The techniques we have used to dry out overwatered soil are outlined below.
Stop Watering and Allow Time To Pass:
The best way to avoid overwatering the soil and plants is to wait until they are totally dry before watering again.
This will enable the water in the soil to evaporate and the plants to transpire the water that is already there.
Place Plants in the Windy Area:
The plants use wind to hasten the pace of evaporation. If you’ve been particularly generous to your plant and given it more water than it requires.
No need to freak out! bring the plant somewhere breezy. In order to promote transpiration, wind is a key factor. The plants will lose more water as the wind speed increases.
Place Plants in an Area With Low Humidity:
Theodore W. Tibbitts from the University of Wisconsin Madison claims that humidity directly affects transpiration by regulating the rate of plant water loss and stomatal opening.
Your plant will transpire more water than usual if you place it in a low-humidity region.
Placing your plant in a low humidity region with a warm temperature is a smart move to treat water saturation because humidity has a direct impact on stomatal gates.
Remove Any Mulch From The Top of The Soil:
Mulch is applied to the tops of plants to keep pests away and to slow evaporation.
Mulch assists with maintaining soil moisture. To fast dry the overwatered soil, make sure to remove the mulch from the top layer of the ground.
By getting rid of it, you’ll increase the rate of evaporation, causing extra water to evaporate more quickly.
Placing Holes at the Side of the Pot:
If the container doesn’t already have one, you can drill many holes into the side of it to increase drainage.
Make sure that no slabs or stones are inserted within the plant container so as to block the holes.
In addition to allowing water to drain from the soil, these drainage holes will also allow for better soil aeration and root development.
It can aid in the soil drying just as quickly, but being less typical than holes in the bottom.
Use a Hairdryer to Dry the Soil
It’s simple to get rid of the extra moisture by blow-drying the soil with a hairdryer.
The dryer will only dry the soil’s surface when it is pointed at it, leaving the remainder of the soil wet.
The dirt must be taken out of the container and spread around to let all the moisture evaporate. As a result, the soil’s moisture would be largely removed by the heated air.
In this situation, you might think about adding dry dirt while you’re at it or repotting the plant in fresh soil.
Another thing to think about is the possibility that if the dryer’s hot air gets too hot, it could kill a lot of the soil’s microorganisms. This may result in the soil’s ability to supply nutrients to the plant being diminished.
My plants stay healthy even after repotting thanks to the Miracle-Gro Potting Mix I get from Amazon. Clicking here will take you there.
How does a succulent that has been overwatered look?
How can you tell if your succulent is getting too much water? You can usually determine if a succulent is being overwatered or underwatered by looking for telltale indications. A plant that has received too much water will have soft, mushy leaves.
The leaves would either turn translucent in color or appear lighter than they would on a healthy plant. A succulent that had received too much water would frequently lose leaves readily, even when only lightly handled. Usually, the lowest leaves are the ones to suffer first.
The plant will look to be unhealthy overall. When this occurs, the plant is either being overwatered, sitting in the incorrect soil that does not dry out quickly enough, or both.
Your plants are being overwatered if you have been giving them regular waterings or if you have been following a watering schedule regardless of how the plant appears.
On the other hand, a succulent that has been submerged will have withered, wrinkled, and deflated-looking leaves. The leaves will appear thin and flat. The entire plant will appear withered and dry.
The leaves of a good succulent plant should be thick and solid, not mushy or desiccated.
To learn more about this subject, visit my post titled “How To Tell If Your Succulent is Over or Under Watered,” in which I go into great length about how you may determine whether your succulent plant is being over or under watered.
This String of Pearls ‘Senecio Rowleyanus’ plant leaf is one that has been overwatered. If a succulent’s water storage capacity has been exceeded, it may physically burst from overwatering.
Do succulents need to be in the sun directly?
1. Ensure that your succulents receive adequate light. Depending on the type, succulents need six hours of sunlight each day because they are light-loving plants. You might need to gradually expose newly planted succulents to full sun exposure or give shade with a translucent screen because they can burn in direct sunshine.
How does a succulent look as it ages?
The leaves on your succulent may appear yellow, translucent, or wet. Your succulent is starting to die as a result of overwatering. Brown or black leaves that look like they’re rotting indicate a more advanced case. Therefore, you must begin saving your withering succulents!
Can you revive a succulent that is rotting?
After that, clean the container and fill it with new dirt. Mix a bowl of water with a drop of anti-bacterial dish soap. Carefully clean the succulent’s roots with brand-new cotton swabs. The roots could also be submerged in a weak anti-fungal solution. Before repotting, allow the roots to totally dry out. For two weeks, let the plant remain dry, and keep a constant eye on it.
How frequently should succulents be watered indoors?
Indoor succulent plants probably need to be watered once a week. They require ample time for the soil to dry out in between waterings so that the water may be stored in the leaves. Use the following methods and advice while watering succulent plants inside.
- Use an irrigation system with a little pour spout.
- Fill the succulent plant’s center with water until it is completely submerged.
- Allow water to completely drain out of the pot through the perforations. Make careful to empty any water that seeps through the soil if there is a saucer underneath the plant.
- Since there won’t be enough heat and fresh airflow for the leaves to dry when planted indoors, avoid soaking the leaves to prevent rot from the top down.
- Dry the soil completely in between waterings.
How can I tell if a succulent is about to die?
A succulent should be simple to care for. But there are a few things to know in order to maintain it healthy. How can you tell whether your succulent is prospering or dying, first?
Generally speaking, the following are typical signs that a succulent is perishing:
- The roots are rotting if the leaves are brown and mushy.
- Pale, yellow leaves are a sign of illness or rot that has spread.
- Dehydrated, wrinkled leaves indicate that the roots are drying up.
- Rot or infection was indicated by brown roots.
These are a few warning indications that your succulent may not be prospering. If you have one or more succulents and are worried that your plant is dying, continue reading to learn how to identify when your plant needs care.
Why are the leaves on my plant mushy?
Surprisingly frequently, people overwater their plants, and a few simple changes might help you create a better landscape. Overwatered plants can still be saved and prosper in your landscape after being detected. To aid you in detecting whether there is too much water in your environment, we have put up a list of four symptoms to look out for.
Your plants’ principal source of water, nutrition, and oxygen absorption is through their roots. While a plant’s roots absorb water, plants also require oxygen to breathe. Simply said, your plant will drown if you overwater it. The gap between soil particles might contain oxygen in a healthy soil. There aren’t enough air pockets if there’s too much water present or the soil is always damp. As a result, there is a shortage of oxygen and plants are unable to breathe.
Plants wilt and their leaves turn brown when they receive insufficient water. Additionally, this happens if plants receive too much water. The primary distinction between the two is that while too much water results in soft, limp leaves, insufficient water causes your plant’s leaves to feel dry and crispy to the touch.
When the roots absorb more water than they can use, water pressure starts to build up in the cells of plant leaves. Cells will eventually swell and explode, causing lesions and blisters to appear. After these blisters pop, tan, brown, or white growths that resemble warts start to take their place. On the top surfaces of the leaves, you will also see indentations forming immediately above the growths.
Another sign is slow, slowed growth followed by fading leaves. This symptom is frequently accompanied by leaves coming off. You are overwatering your plants if they have old, yellowing leaves as well as fresh leaves that are falling off at the same rapid rate.
Examine your soil frequently. If you want to check the moisture in the soil, don’t be afraid to stick your finger in the ground about an inch or two. You should cut back on watering if the soil feels damp and you notice some of the aforementioned symptoms. Accurate moisture meters are also sold in many retailers. You can determine how much water is in the soil by simply inserting them into the root ball. This straightforward, low-cost instrument can greatly reduce the amount of guesswork involved in watering your environment.