What kind of cuttings you can take from your succulent will depend on its genus and species. For instance, cuttings or leaves can be used to reproduce the majority of delicate Sedums and some Echeverias. Nevertheless, I utilize leaves for each.
Simply twist a leaf off the stem gently to remove it for propagation. Make certain that the draw is clean and leaves nothing on the stem. In fact, it’s okay to remove a small portion of the stem as well.
Make sure you get all the way down to the stem because every time I’ve broken off a leaf before the stem, it has always died. As you take the leaf off, it helps to have a clear view of the leaf’s base.
It’s a really cheap method to begin a collection of new plants, plus it’s a lot of fun to grow succulents from seed to baby plant to plant!
How to take a cutting for propagation
On the other side, you’ll need sharp scissors or pruning shears to make a cut (I use these and adore them!). Just above a leaf on the stalk, cut off a bit of the succulent.
The succulent’s top can be removed, or you can remove a fresh branch. Both will function!
Where do you cut the stems of succulents?
In case you wished to propagate your own plants, we will start by explaining how to cut your succulents or cacti. What kind of cuttings you take will depend on the kind of succulent or cactus that you are cutting. While some plants can spread by a leaf, others require real cuttings to increase their size.
It’s crucial to obtain the full leaf, all the way up to the stem, if you’re trying to propagate utilizing a leaf. Your leaf will probably die if it is chopped or breaks off before the stem. Just twist the leaf to remove it from the stem; be sure to remove the entire leaf.
Use sharp scissors or pruning shears if you’re taking a full cutting to propagate your succulent. Just above a leaf, cut the stem. You have a choice of taking your cutting from the succulent’s stem or an offshoot.
What you cut for cactus cuttings depends depend on the kind of cactus you have. If the pads on your cactus are growing, pick a mature pad—not a tiny one at the top—and clip it. You should clip a columnar cactus a few inches from the top if you have one. Try to select a thinner stem for columnar cacti as they will root more quickly than thicker ones. You should make your cut as straight as you can.
Where do I find tall succulents to cut?
A succulent cannot return to its original compact height and shape once it has been stretched out. But don’t worry!
Start by using good-quality scissors to trim off the succulent’s top (I adore this pair so much! Definitely worth every cent! Leave 2-3 leaves on the base for at least an inch or two. If you leave a few leaves on the base to absorb sunlight, the base will thrive.
I’ve seen bare stems produce new offshoots, but it takes a lot longer than when I leave a few leaves on the stem. You can trim some of the stem to shorten the cutting if the cutting (the top portion you cut off) is too long for your taste.
Allow the base and the cutting to dry for a few days. You can plant the cutting in soil and start watering it once the cut end has calloused over (totally dried out and appears “scabbed”).
Cuttings do, in my experience, require a little bit more frequent watering than a fully rooted plant. To prevent the stem from becoming too soggy and rotting, use a soil that has a really good drainage system. Here is more information on how to grow succulents from cuttings.
Within a few days, maybe, but most probably within two to three weeks, the cutting should begin to give off roots. You should reduce watering as the roots take hold in order to put the plant on the same “schedule” as fully rooted plants.
Within a few weeks, the base, or original plant, will begin to produce additional offshoots. This plant can still be taken care of in the same manner as before the cut.
The leaves you initially left on the base plant can eventually wilt or drop off. Although highly common, this won’t always occur.
But if they do come off, don’t panic! Without the “parent leaves,” the young rosettes will still be able to develop.
Is it possible to remove a piece of a succulent and replant it?
Because succulents are such hardy plants, you can actually plant a piece of one and it will develop into a new plant. It may sound like a horror film or the premise of an upcoming science fiction drama on Netflix, but it’s truly possible to regenerate something new from a severed limb. Even if one of its branches is cut off, they will still manage to survive.
Yes, you can prune or cut off a section of a succulent and plant it elsewhere. The clipped succulent piece will adapt to its new home and develop into a full-fledged succulent with the right growing circumstances.
If you want to learn more about pruning succulents, keep reading. It’s like getting numerous plants for the price of one if you get the technique down!
Prepare the Pot
Cuttings can be grown in a temporary pot while they develop roots, or you can just plant them in a permanent container. In either case, you’ll need a pot with a drainage hole that’s big enough to give each cutting 2 to 3 inches of space.
To shield your succulents from standing water and root rot, fill the container with a grittier, well-draining soil. Cactus/succulent potting soil is typically available at garden centers. Alternatively, you can create your own by mixing 3 parts potting soil with 2 parts coarse, salt-free sand and 1 part perlite or pumice.
Plant the Cuttings
Insert the cut end of a stem 1 to 2 inches into the ground. If the succulent has leaves, you might need to remove a few of them to reveal the stem’s base. The lowest leaves shouldn’t contact the soil; they should rest just above it. To help the cutting stand straight, softly compact the dirt around it.
Remove any necessary leaves from stemmed succulents to expose 1 to 2 inches of stem for planting.
Pick the Right Location
Choose an area with enough of airflow, bright indirect light (not direct outdoor sun), and succulents that are still young. Cuttings require sunshine to develop new roots, but direct sunlight might cause them to quickly dry up. On indoor succulents, good airflow helps avoid gnat and mealy insect infestations.
Water
Cuttings require constant hydration until they can form roots, unlike mature succulents. Water the soil just enough to prevent it from drying up, but not too much that there is standing water. Actual frequency varies depending on humidity and temperature but is often 2-4 times each week.
Care for Rooted Succulents
A very slight pull will reveal whether a cutting has roots after 4-6 weeks. Change to deeper, less frequent watering for succulents with roots. Water just once the soil is completely dry, which takes about 2-4 times each month. If necessary, repot the succulent and relocate it gradually to the right lighting. Don’t increase light exposure for 1-2 weeks to give the plant time to adjust. Maintain your succulent’s care, and in the upcoming months, keep an eye out for above-ground development.
Should you remove succulent leaves that have died?
Succulent plants have long-lasting, thick, meaty leaves and stalks, but they eventually wilt and die. On plants, it’s normal for some leaves to die, however this rarely signifies disease. Quickly removing the dead leaves enhances the appearance of the plants and stops the spread of any disease-causing organisms. Regular pruning shears risk crushing the succulent stems, therefore it’s preferable to make precise cuts with a disinfected, sharp knife or a razor blade.
One part household bleach and nine parts water should be added to a bowl. When cutting away dead foliage, it is important to disinfect the knife and stop the spread of illness. Dip the knife into the solution between each cut.
Remove individual dead leaves by cutting through them where they meet a stem. Cut off the leaf at its base but avoid going into the plant’s crown if you have a succulent that grows rosettes from the plant crown.
Trim off entire stems or branches from succulent kinds that exhibit trunk-like growth when all of the leaves on the stem are dead or showing signs of decline. Look beneath the dead part of the stem for a swollen leaf node. 1/4 inch above the node, cut through the stem.
Cut off the dead parts of succulents that resemble ropes, like Rhipsalis paradoxa, in the space between two leaf segments. These result in lengthy foliage strands joined together by a skinny stem. Only the damaged end pieces should be removed by cutting through the stem. If all the foliage is dead, cut the rope off at the root.
When should succulents be pruned?
Succulents benefit most from pruning at the start of their growing season, although you can prune them at any time. If you prune around the end of the growing season, new growth might not appear as rapidly, but it will develop gradually and accelerate once they begin to grow vigorously again.
There are numerous succulents that grow best in the summer, but there are also quite a few that grow best in the winter. To determine when your succulents are actively developing, check at this dormancy table.
My succulents are often pruned in the spring, after spending the winter indoors. Typically, they become quite stretched out and lose some of their initial beauty.
I can freshen the arrangement by pruning them without needing to buy new plants. It’s a fantastic approach to grow your garden!
What to do when succulents reach an unmanageable height?
The majority of succulents are graceful low-growing plants that neatly tuck into cracks in rockeries, flower beds, pots, and between pavement stones. Although succulent pruning is not typically necessary, it is a simple procedure that can be used on plants that grow long and lose the compact character that makes them so coveted. Understanding how to trim a leggy succulent can help you get the plant back to the size you want while also giving you plant material for another one of these resilient, simple plants.
When you complain that your plant is too tall, you should regulate it. This could be caused by blooms, leaves, or stalks, and the plant may end up seeming smaller or not fitting into its original location. The type of plant you are growing will determine what to do if your succulents get too tall.
Plants go through a process known as etioliation when they are grown indoors or in other low light environments. The plant is stretching upward to catch more light, which causes the stem to lengthen. Transferring the plant to a southern exposure is the straightforward answer. But that leggy party is still left after this. Fortunately, it is possible to top leggy succulent plants, which will remove the excessively tall portion and encourage the growth of new, more compact shoots.
Why is my succulent gaining height rather than width?
THE AFFILIATE LINKS IN THIS POST COULD BE USED. FOR DETAILS, PLEASE REFER TO THE DISCLOSURE POLICIES.
Your succulent does it appear different? Are you perplexed as to why it is becoming so stretched-out, tall, and leggy?
Your succulent is experiencing etiolation if it is expanding vertically rather than horizontally. Your succulent needs more light, to put it simply.
Sadly, damage that has already been done cannot be undone. But it can bounce back. Your stretched succulent can be propagated, which will result in more plants. Win!
Let’s examine this stretched Crassula perforata more closely. Find out what caused this to happen and how to solve it.
Visit How to Grow Succulents Indoors to catch up on general care for succulents.
How should a succulent stem be cut for replanting?
I make a lot of movies and posts about succulents because I have a lot of them in my yard. They are perennial gifts, so to speak. You can simply cut them to acquire more.
Because the vast majority of succulents spread in the same manner, I wanted to write one post that you could refer to whenever I write about a particular succulent. These are the two incredibly simple methods.
Let me demonstrate how to grow succulents:
I usually divide succulents using stem cuttings. Ensure the sharpness and cleanliness of your pruners. Simply trim the stems to the desired length, remove the bottom third of the leaves, and then wait 2 weeks to 4 months before planting them to heal off (the cut end of the stem will callus over).
I either plant them straight in the ground or in a pot with planting mix for succulents and cacti. I use one that is made nearby; it’s also good. Succulents require a loose mixture so that the water can drain completely and prevent rot.
I rarely use individual leaf cuttings to propagate succulents, but it’s still simple. Lay the leaf on top of the mixture after removing it from the stem, making sure to remove the entire leaf all the way to the stem. Off the cut end, there will be a new plantlet.
I suppose I could propagate succulents in my sleep because I do it so frequently! Although many succulents make excellent houseplants, mine all grow outside. If you have just one or two of these bizarre plants, you can easily grow more using these simple methods.
Aloe Vera must be multiplied by division, which involves removing the pups from the mother plant.