Taking an active, healthy leaf from a mature succulent plant and utilizing it to establish a new plant is known as “propagating with leaf cuttings.” Because the leaves of succulents with fleshy, plump leaves, like echeveria, are simple to snap off cleanly, this method of propagation works well with them.
While some leaves may simply pop off with a little tug, others could necessitate the use of a sharp knife. Take a healthy leaf from the plant’s base with clean hands or a sterile knife, making sure to remove the full, undamaged leaf.
After being removed, allow the leaf to recover for about four days in a warm, well-lit place so that the wound can callus over. When the leaf has calloused, prepare a fresh planter with soil, fill it with water, and set the callused leaf on top of the soil for multiplication.
When the earth is dry, spritz your leaves with a spray bottle. Keep them warm, in a room with lots of light, but out of direct sunlight. They must be kept warm and moist.
Little roots and leaves will start to emerge after around three weeks! A succulent may need a few months to grow large enough to be replanted (photos above are after about 8 weeks). When the leaf eventually gets brown and falls off, you’ll know it’s time. This indicates that the succulent no longer requires the leaf because it has consumed all of its nutrients.
When should I plant my succulents that I’ve propagated?
Succulents can also grow from solitary leaves. Succulent cultivars with fleshy, plump leaves that are simple to remove function well with this technique. Leaf propagation spares less of the “mother” plant and each leaf can create numerous little plants, even though it will take much longer to produce a full-sized plant. Getting a quality leaf cutting is crucial, much like with stem cuttings. Although they must split from the plant at the base of the stem, leaves can be wiggled off of a plant. Kremblas advises caution, saying, “Be sure to reach all the way down to where the leaf joins the stem, as a broken leaf will not propagate.” And make sure to select a leaf that is firm, plump, and limp-free.
Leaf cuttings should be allowed to callus and need partial sun to grow, just like stem cuttings. Leaf cuttings should be placed on top of a thin layer of succulent potting soil (not buried), and they should be misted with water to keep them wet. The leaf cuttings will start to grow little “pup” plants in about three weeks. The mother leaves will start to wilt and drop off after eight weeks, at which point your pups are ready to be planted.
Gather Your Succulents To Plant
For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.
Prepare your succulents for planting.
The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.
After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.
Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.
Mix your soil.
If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.
To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.
Plant!
We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.
Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.
Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.
Admire and Show Off Your Work!
Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!
Can you put succulent cuttings directly into the ground?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- The cuttings will begin to take root in about a month, and then the tops of the cuttings will begin to grow.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
What should you do if your succulents multiply?
As it is simpler than using leaves or stem cuttings, the majority of succulent parents prefer to propagate their offspring via offsets. Offsets make for incredibly simple and straightforward propagation, making it ideal for individuals who don’t want to wait for the plant to develop leaves. Succulents like the Haworthia are ideal for this technique.
It is strongly advised to hold off until the offsets are around half the size of the parent plant to make sure they have the nutrients they need to live after being cut off from the parent plant. In order to find the rooted offset from the parent plant, you might want to start by thinking about removing the plant from its container. This is also an opportunity to repot the plant and check the root structure. Then, just twist the offset to remove it from the mother succulent’s roots. If some roots are torn, it won’t matter because the offset will have an opportunity to build its own roots. After removing the offsets successfully, allow them to dry for one to one day. After they have dried out, put them in cactus soil that drains well and water them thoroughly.
Cutting off the offset’s stem or plucking offsets from the parent plant with roots are two ways to propagate from offsets. Therefore, scroll up to read our instructions on how to take a correct cutting if you want to try doing it using stem cuttings. Use only sterilized pruning implements at all times. Place your cuttings in a well-drained potting mix after allowing them to dry completely. Within a few weeks, roots ought to develop.
Maintaining the offsets is really easy. To prevent etiolation or sunburn, you should give them a few hours of morning sunlight or afternoon shade. One piece of advice is to only water them thoroughly when the soil is absolutely dry.
And voilà! That is how you successfully develop your own succulent garden and propagate your succulents. Not too difficult, am I right? To determine the ideal amount of light and water that works for your succulents and encourages new development, we suggest you to experiment with a variety of leaves and stem cuttings. Tell us how your propagation process is going!
Watch this little video to learn how to avoid four mistakes while cultivating succulents.
You may read more about propagating succulents in the following articles:
How can water from propagating succulents be transferred to the soil?
It is strongly advised to wait until the cutting has at least an inch-long root or the mother leaf has begun to dry up before leaving it to air-dry on a paper towel for approximately a day or two if you wish to transfer or transplant your succulents from water to soil. Remember that water roots are far more delicate than soil roots, so handle them carefully and acclimate them to soil gradually.
When the roots are completely dry, gently bury your succulent in unfertilized cactus soil and place it in a spot with only bright, indirect light. Giving your succulents direct sunlight at this time is not advised because they are still delicate.  
From this point on, it is advised to water your succulent on a regular basis. Every two weeks, a thorough soak would do.
Watch this video to learn about succulent water propagation:
See some of the most frequently asked questions about propagating succulents and cacti in this little video.
How quickly do cuttings of succulents grow?
The time it takes to propagate a succulent varies based on the type of succulent and the method you utilize. Succulents are fairly simple to grow.
After you propagate a succulent, it often takes two to three weeks or longer for it to begin exhibiting symptoms of new growth.
A succulent won’t begin to grow right away after being propagated, though. You should have patience while your plant is propagating because it could take several weeks before any new growth appears.
The kind of succulent you are propagating and the method you use will determine how long it takes.
- Cuttings
- Leaves
- Offsets
- Seeds
- Water
How Long Do Succulents Take To Grow From Cuttings?
Because they grow quickly, succulents are a common plant to reproduce from cuttings.
Root development and new leaf growth typically take 4 and 8 weeks, respectively, when growing succulents from stem cuttings.
It’s probably big enough to move to a new pot at this time. The original leaf changing color and dropping off is typically a sign that the new plant is prepared for potting.
The cuttings should all root fairly rapidly if kept in strong light, and once established roots have grown, they should all start producing new succulent leaves.
Depending on the size of your cutting, it may take longer or less time, but in general, you may begin harvesting baby succulent plants in around 20 weeks.
Even if some of your cuttings could take longer to grow than others, there are no problems with the propagation procedure as a result.
Due to their genetic make-up or other variables like exposure to particular elements or light, some succulents just develop more slowly than others.
Your cuttings should successfully root as long as you keep them out of direct sunshine and give them plenty of water!
How Long Does It Take To Propagate Succulents From Leaves
The amount of water provided and whether or not they are put in direct sunlight are just two of the numerous variables that will affect how long it takes for succulents to form roots.
For instance, whereas Sedum species have thin leaves and can take up to three weeks to establish roots, Aeonium species have thick leaves and form roots in one week.
When propagated from leaves, succulents typically take 1 to 3 weeks to produce roots. A succulent could need a few months to grow to the right size for repotting.
Generally speaking, as soon as the leaf has roots and the succulent is large enough, it’s typically preferable to repot.
While some leaves may quickly take root, it takes a lot longer for a rosette to develop. In certain circumstances, it is preferable to hold off on any repotting until the rosette has developed.
How Long Does It Take To Grow Succulents From Offsets
With offsets, which are miniature replicas of the main plant, succulents can reproduce swiftly and easily.
When reproduced via offsets, the time it takes for succulents to grow roots ranges from 4 to 10 weeks.
Offsets happen when a plant develops so much that its root system starts to encroach on too much area.
Now, just as you would cut a branch from any other tree, the mother plant creates an offshoot that will eventually become an individual.
Succulents are easy to propagate—all you have to do is take the offset from the mother plant. They often attach pretty simply, so this method should be straightforward.
Just be sure to give the offset a separate pot or container so that it can develop on its own.
If you want to grow more succulent plants rapidly, offset propagation offers a quick turnaround.
Simply wait until your offset has established roots, which takes, on average, four weeks, and then repot it into its own pot.
How Long Does It Take To Grow Succulents From Seeds
Dealing with succulent seeds can be challenging. The seedling takes three to six weeks to germinate, and another six months or longer for it to mature.
The method that requires the most time is seed-to-plant propagation. The process of starting the seedlings can be difficult.
It takes perseverance to grow succulents from seeds because it takes around three weeks for the first little shoot to appear.
However, there may still be a long waiting period until they reach adulthood.
The type of succulents you are propagating, the growing environment, and whether you are utilizing hydroponic or conventional techniques all have an impact on how long it takes to cultivate succulents from seed.
Although it takes many months for the seed to germinate and grow into a full plant, the process is often gradual.
How Long Does It Take To Propagate Succulents in Water
Succulent cuttings that are reproduced in water require around two weeks to establish roots and are then prepared for soil transplantation.
When a succulent’s roots begin to grow after being propagated in water, it should be placed in soil.
It will produce more leaves rather than a root system if the succulent is not transplanted, which will make it more challenging for the plant to take nutrients from its surroundings.
When you notice the roots forming, that’s a good sign that the succulent plant is ready to be rooted in the ground.
Until they can be planted permanently, succulents that are propagated in water do best when placed outside on a sunny patio or porch.
It is significant to note that each succulent’s propagation period will vary according on its growth environment, cutting material, quantity of leaves, and water quality.