This perennial succulent spreads out to a maximum of 24 inches and grows to a height of 6 to 8 inches. It produces unnoticeable pinkish mauve or blue blooms.
Teddy bear vines can be cultivated in zones 10a–11b as groundcover or in hanging baskets because they are creeping plants.
Succulent or teddy bear plant?
A succulent shrub-like plant called Kalanchoe tomentosa ‘Teddy Bear’ has small leaves that are heavily coated in a brownish felt. Since it is a kalanchoe, Madagascar is where it first appeared. Small, hairy, and bell-shaped describe its flowers. Teddy Bear appreciates a soil that is permeable and has good drainage. Frost protection and sufficient lighting are required. It can grow to 10″ tall or more and is hardy down to 36F. When the soil is dry, water it deeply. Popular houseplant tomentosa has velvety, dark-red ringed leaf. When fully grown, the kalanchoe tomentosa can reach a height of 45 cm, with a sturdy stem that develops branches and several leafy clusters. It is simple to maintain.
A teddy bear vine: what is it?
A distinctive indoor plant called a teddy bear vine features spreading or trailing stems adorned with odd teardrop-shaped fuzzy chocolate-brown leaves. Teddy bear vine’s common name comes from the softness of its leaf. Teddy bear vine grows best in hanging baskets in front of a light source, such as a window or fluorescent lighting, or on a flat surface, such a tabletop, where the stems may spread out horizontally. You don’t have to be concerned about this trailing houseplant encroaching because of its moderate growth rate.
Teddy Bear Vine Growing Instructions
Teddy bear vine should be grown in a sunny or neutral area. In most places, it is possible to get some direct sunlight on the leaves through a window, however morning is preferable over afternoon because too much sunshine can damage the foliage. Teddy bear vine does well under plant lights as well as standard fluorescent lights, which makes it a popular choice for offices.
When the top inch or two of the potting mix is dry, water the teddy bear vine. Teddy bear vine does better if left continuously a bit too dry than a little damp if you’re unsure about watering it.
To encourage your teddy bear vine to grow more quickly, you can fertilize it. The spring and summer seasons are normally the best times to feed this houseplant. Use a general-purpose houseplant fertilizer when fertilizing, and make sure to follow the instructions on the product’s packaging.
Teddy bear vine normally doesn’t need much pruning, however you can clip the stems whenever they get unattractive lengths.
Include these kinds with your Teddy Bear Vine:
Square Plant In hanging baskets, inch plant, a close relative of teddy bear vine, and teddy bear vine can be grown together for a unique effect due to their similar plant shapes.
Highlights
You just have to touch this soft succulent, Kalanchoe tomentosa ‘Teddy Bear’! The extremely thick, rounded leaves of this genetic variation of “Chocolate Soldier” are covered in a delicate layer of fuzz. The little, golden flowers on it are equally velvety and bloom in the spring or summer. When fully grown, it is around 10.0″ wide and 12.0″ tall.
Soft succulents can be brought indoors to grow on a sunny window sill or under a grow lamp if there is a chance of cold weather because they will not survive a hard freeze. To avoid rot, they require excellent drainage and infrequent watering. Use well-draining cactus and succulent soil with 50–70% mineral grit, such as coarse sand, pumice, or perlite, and choose containers with drainage holes. Wait until the soil is completely dry before rehydrating it by watering deeply enough for water to drain out the drainage hole.
Re-rooting this variety from stem cuttings is simple. For advice on propagating succulents, consult our Succulent Cuttings Guide.
Is it possible to grow teddy bear vine?
Tip cuttings are used to spread this plant. Simply cut off a stem that has around three pairs of leaves on it. Place the cutting’s bottom leaves in your mixture after trimming them off. Mist the soil frequently to promote roots and growth.
The fuzzy succulent is what?
Despite the succulent’s fuzzy leaves shielding it from the sun, avoid overexposing your plant to the sun to prevent sunburn. Additionally, watering fuzzy succulents is best done near the soil line rather than from above. Avert getting the succulent leaves’ hairy surfaces wet. It might cause decay.
Kalanchoe tomentosa
The fuzzy succulent Kalanchoe tomentosa ‘Silver Panda’ has several erect leaves that resemble bunny ears and is probably everyone’s favorite fuzzy succulent “fur. Dark chocolate marks can be seen along the leaf margins, creating a wonderful contrast. Kalanchoe tomentosa is the name of many furry cousins of “Silver Panda.” The Kalanchoe tomentosa “Chocolate Soldier” has a tan to brown tint and is green in hue. Cinnamon is more of a reddish brown tint than its name would imply. “Black Tie” has darker lines at the edges and is a lighter, brighter variant of Silver Panda. the tomentosa kalanchoe “Teddy Bear is just as cute as it sounds. It has shorter, rounder, fluffy tan leaves that form loose rosettes, and the leaf margins have cinnamon-to-chocolate patterns. You can divide any Kalanchoe tomentosa plant by taking stem cuttings or leaf scraps.
All Kalanchoe tomentosa species prefer bright, indirect light that ranges from partial sun. All are only hardy to zone 10 (30 F, -1 C), therefore keep them inside during the winter to prevent them from freezing. They can thrive indoors all year long provided there is enough light.
Echeveria setosa
The attractive Echeveria setosa has noticeable hairs that give it a fuzzy appearance. This fuzzy succulent’s hairs also help to collect dew from the air, allowing the plant to extract every last drop of moisture from its surroundings. Only 4 inches broad and 3 inches tall, the rosettes are still quite little. When setosa is used into mixed succulent plantings, the silky, flexible hairs create a fascinating texture. Don’t be put off by the hairy leaves; E. setosa can also be multiplied via leaves, just like any Echeveria.
Echeveria setosa thrives in filtered shade to partial sun. Only zone 10 (30 F, -1 C) is where it is hardy, so protect it over the winter.
Sedum dasyphyllum
The Sedum dasyphyllum ‘Fuzzy Wuzzy’ plant grows fat small rosettes with teeny, delicate hairs covering them. In order to create a lovely, trailing plant, this hairy succulent creates dense mats that will spill over the edge of a container. It is a pretty hanging succulent that only grows to a height of 3 to 4 inches. I’ve seen a single rosette utilized to great effect as a “shrub in a fairy garden! Successful methods of propagation for Sedum dasyphyllum include leaf division, stem cuttings, and division.
To zone 8B, Sedum dasyphyllum is hardy and thrives in direct sunlight (15 F, -9C). In mild areas, plants that are cold tolerant offer protection during extremely harsh winters.
Senecio haworthiiCocoon Plant
The cocoon plant or woolly Senecio (syn Caputia tomentosa) is the common name for Senecio haworthii. The white, fluffy succulent leaves resemble a collection of cocoons hiding a plethora of butterflies. With numerous, woody, and branching stems, this plant grows into a tiny shrub that is between 9 and 12 inches tall. In the garden or in mixed arrangements, the color is striking and calming. Using stem cuttings or other methods, expand your collection of cocoon plants. Growing new leaves on a plant is known as propagation, pronounced PRAH-puh-gate.
Senecio haworthii thrives in bright indoor light and full sun, although it is only hardy to 10 degrees (30 F, -1 C). Bring it indoors during the winter to keep it from freezing.
Sempervivum ‘Fuzzy Wuzzy’
Do you recall the kids’ song Fuzzy Wuzzy was a bear? That was something I simply adored as a kid, and Sempervivum Fuzzy Wuzzy has won my heart! Trichomes in profusion around the leaf margins give them a fuzzy appearance. Throughout the year, the green rosettes turn pink and golden. Unexpectedly, this sempervivum is particularly susceptible to cresting, which results in gorgeous curls and shapes. This fuzzy succulent, sometimes known as hens and chicks, is under 3 inches tall and makes a great succulent groundcover. To multiply Fuzzy Wuzzy, separate the “chicks” from the “hens.”
The ideal conditions for Sempervivum Fuzzy Wuzzy are full to partial sun. It is resilient to zone 5, or -15F/-26C. This is a wise choice for regions with harsh winters.
Cotyledon tomentosa “Bear Paws
Cotyledon tomentosa is a cute, fuzzy succulent with leaves that resemble a bear’s paws. See the tiny claws or toes? The little, pink to brown points on the circular, chubby leaves are arranged in a sequence. This contains “tomentosa” in the name, which means “covered in hairs,” just like the first thing on our list. These paws are irresistible for caressing! Be gentle; they grow successfully from leaf as well as stem cuttings. The leaves pop off rather easily. The plant is really adorable and grows 6 to 8 tall!
Cotyledon Bear Paws thrive in filtered outdoor or bright indoor light. It is only hardy to zone 10 (30 F, -1 C), therefore in the winter, take cautious to prevent it from freezing.
Echeveria pulvinata”Chenille Plant
Green leaves with striking red borders grow in rosettes on the attractive Echeveria pulvinata ‘Ruby’ plant. It seems silvered due to the short, velvety trichomes that cover it. In contrast to the majority of Echeveria, pulvinata likes to grow woody branches that reach a height of 9–12 inches. The “chenille plant” can be multiplied by employing stem cuttings and individual leaves.
Echeveria pulvinata prefers full to partial sun for optimum growth. E. pulvinata, which is hardy to zone 10 (-30 F, -1 C), needs protection from cold.
Kalanchoe orgyalis ‘Copper Spoons’
The beautiful variation Kalanchoe orgyalis “Copper Spoons” has velvety leaves that are richly cinnamon-colored on top and silvery-white underneath. This attractive, fluffy succulent can reach a height of 12 inches or more. Mixed succulent arrangements benefit from the fantastic color and texture added by Copper Spoons. Use individual leaves or stem cuttings to propagate Copper Spoons.
Give Copper Spoons access to strong, filtered light for optimal effectiveness. In the winter, Kalanchoe orgyalis needs protection from freezing because it is only hardy to zone 10 (30 F, -1 C).
Crassula congesta
Crassula congesta is another preferred succulent for mixed succulent arrangements. With clusters of chubby leaves that are flat on one side and circular on the other, stems grow to a height of 6 to 8 inches. The congesta’s green leaves have a “frosted appearance” due to the tiny, fuzzy hairs. Simple to grow from stem and leaf cuttings, this will quickly become a favorite in your collection.
Indoors, bright light and filtered or partial sun are optimal for Crassula congesta growth. During the winter, bring it inside. It only survives in zone 10. (30 F, -1 C).
Cyanotis somaliensisPussy Ears
The strange and furry succulent Cyanotis somaliensis is also known as “pussy ears,” “kitten ears,” and “furry kittens.” It develops trailing stems and reaches heights of 12 to 18 inches. It grows beautifully in a hanging basket. Kitten ears produce flamboyant violet flowers that are closely related to Tradescantia. The best way to spread this fuzzy succulent is through stem cuttings.
Provide filtered sunlight or bright artificial lighting for Cyanotis somaliensis. It should spend the winter indoors in most climates since it is only hardy to zone 10 (30 F, -1 C).
Delosperma echinatumPickle Plant
The plump, green leaves of Delosperma echinatum have tiny, spiny-looking hairs that give the plant a prickly appearance and an unusual texture. This simple-to-grow succulent, sometimes known as the pickle plant, is indigenous to rocky settings in South Africa. The pickle plant is perfect for rock gardens and spilling over the edge of containers because it grows to a height of 6 to 8 inches. Use individual leaves or stem cuttings to propagate the plant.
Delosperma echinatum flourishes indoors under light conditions ranging from filtered to partial sunlight. The pickle plant should be taken indoors during the winter since it is only hardy to zone 10 (30 F, -1 C).
Echeveria Doris Taylor
Among all fuzzy succulents, Echeveria Doris Taylor is one of the most exquisite. The small, floppy trichomes give the rosettes the look of silvered frost, giving rise to the common name “woolly rose.” It is a hybrid of the previously mentioned Echeveria setosa and pulvinata, and it produces numerous offsets. The young succulents that emerge at the base quickly and develop into long clumps are known as succulent offsets. Large rosettes can be up to 8 inches broad and 3-5 inches tall. Dorish Taylor propagates admirably via individual leaves, like the majority of Echeveria.
Partially to slightly filtered sun is ideal for Echeveria Doris Taylor. Only zone 10 (30 F, -1 C) is where it is hardy, so be sure to keep it from freezing throughout the winter.
Plectranthus tomentosaVicks Plant
A fuzzy succulent known as Plectranthus tomentosa is sometimes known as “Cuban oregano” or “succulent coleus.” It belongs to the mint family and has velvety leaves with a camphor-like mint aroma, hence the common name Vicks plant. Green leaves with scalloped edges get a silvery sheen from the tiny trichome fluff. The Vicks plant can reach a height of 12 inches or more and bear a profusion of eye-catching lavender blossoms. Use individual leaves or stem cuttings to propagate your plant.
In full sun, Plectranthus tomentosa flourishes. Bring it indoors during the winter to prevent it from freezing. It only survives in zone 10. (30 F, -1 C).
Kalanchoe beharensis ‘Fang’
The interesting plant Kalanchoe beharensis ‘Fang’ is also known as the “owing to its broad, fuzzy succulent leaves, feeling plant. The leaves are silvery green below and light tan with bronze highlights on the top. On the underside of the leaves, peculiar tubercles that resemble teeth grow, giving rise to the name “Fang. Fang can reach heights of 3 feet and a width of 2 feet when grown in the ground, but it can be readily contained in a container at just 9 to 12 inches tall. Although mature plants produce clusters of reddish-orange, hairy blossoms, the plant is primarily grown for its cool leaves. Individual leaves can be used to grow fang, although stem cuttings are more dependable.
Kalanchoe beharensis grows in a variety of lighting conditions, including indoors and in full sun. It can withstand a lot of heat, but it is sensitive to cold. Fang needs be carried indoors over the winter since it is only hardy to zone 10 (30 F, -1 C).
Crassula mesembryanthemoides
Crassula mesembryanthemoides, the final of the list’s hairy succulents, is a native of South Africa. The plant’s fuzzy succulent leaves with ft-long, white trichomes that give it a frosty appearance. Over 12 inches tall, well-branched woody stems are present. Utilize individual leaves or stem cuttings for reproduction.
The optimal conditions for Crassula mesembryanthemoides growth inside are bright light or partial to filtered sun. Since it is only hardy to zone 10, bring it indoors for the winter (30 F, -1 C).
Whew! You have it now! The history of fuzzy succulents, how to care for them, and my favourite 15 kinds. Would you think there are even more fuzzy succulents at Mountain Crest Gardens? How do you feel? If you could tell me in a quick comment, that would be wonderful! Have your favorites been included? Have you recently met someone you’d like to get to know better? Please let me know, and I’ll respond straight away!
P.S. Please subscribe if you’d want more detailed advice on caring for succulents! My free e-course, 7 Steps to Succulent Success, will also be sent to you! I’m hoping you’ll like it!
P.P.S. Would you consider joining my Facebook group for cactus lovers? We discuss design, identification, propagation, and care of succulents. They’re a friendly bunch who would love to meet you!
P.P.S. Would you consider joining my Facebook group for cactus lovers? We discuss the maintenance, growth, id, and design of succulents. They’re a friendly bunch who would love to meet you!