How To Trim And Replant Succulents

Because succulents are such hardy plants, you can actually plant a piece of one and it will develop into a new plant. It may sound like a horror film or the premise of an upcoming science fiction drama on Netflix, but it’s truly possible to regenerate something new from a severed limb. Even if one of its branches is cut off, they will still manage to survive.

Yes, you can prune or cut off a section of a succulent and plant it elsewhere. The clipped succulent piece will adapt to its new home and develop into a full-fledged succulent with the right growing circumstances.

If you want to learn more about pruning succulents, keep reading. It’s like getting numerous plants for the price of one if you get the technique down!

Can you take the stem off a succulent and transplant it?

I make a lot of movies and posts about succulents because I have a lot of them in my yard. They are perennial gifts, so to speak. You can simply cut them to acquire more.

Because the vast majority of succulents spread in the same manner, I wanted to write one post that you could refer to whenever I write about a particular succulent. These are the two incredibly simple methods.

Let me demonstrate how to grow succulents:

I usually divide succulents using stem cuttings. Ensure the sharpness and cleanliness of your pruners. Simply trim the stems to the desired length, remove the bottom third of the leaves, and then wait 2 weeks to 4 months before planting them to heal off (the cut end of the stem will callus over).

I either plant them straight in the ground or in a pot with planting mix for succulents and cacti. I use one that is made nearby; it’s also good. Succulents require a loose mixture so that the water can drain completely and prevent rot.

I rarely use individual leaf cuttings to propagate succulents, but it’s still simple. Lay the leaf on top of the mixture after removing it from the stem, making sure to remove the entire leaf all the way to the stem. Off the cut end, there will be a new plantlet.

I suppose I could propagate succulents in my sleep because I do it so frequently! Although many succulents make excellent houseplants, mine all grow outside. If you have just one or two of these bizarre plants, you can easily grow more using these simple methods.

Aloe Vera must be multiplied by division, which involves removing the pups from the mother plant.

How are overgrown succulents trimmed back and replanted?

After a few years of vigorous growth, succulents can become overgrown and root-bound. Repotting them into a bigger container with new soil, pruning the leaves sparingly, and making sure the light and soil nutrients are ideal will all help them look better.

How to Repot Overgrown Succulents

  • Gently remove each plant from the old container by gently pulling from the base of the stem.
  • Partially fill the new, larger pot with a grittier, better-draining soil, such as a potting mix for succulents and cacti.
  • With a fresh pair of scissors or pruning shears, remove any unwanted leaves, then position the plants in the new pot.
  • Soil should be poured into the pot to the last bit.
  • Optional: Apply a top dressing to the soil’s surface.
  • Place in the Appropriate Lighting (see succulent product page)
  • When the soil is totally dry, wait until it has been let dry for 3–7 days before deeply watering it again.

Can a succulent be grown from a cutting?

Succulents that are fully established don’t require daily watering, but leaves and cuttings do. Having said that, you should avoid giving them too much water because doing so will turn them orangey-brown and eventually kill them.

When working with leaves, place them on top of the soil while making sure that their ends don’t actually touch it. Water the leaves whenever the soil becomes dry. To soak the soil’s top, I use a spray bottle.

The cut end of the leaf should be inserted into the soil, according to some experts, but the majority of the leaves I attempted to plant in this manner either perished or just developed roots without sprouting new plants.

Cuttings must be buried in the soil, unlike leaves. They only require to be planted and watered for them to begin to develop roots because they are already virtually fully formed succulents!

Similar to leaves, cuttings require watering if you see the soil is becoming dry. Within a few weeks after you’ve gotten your watering schedule down, your cuttings will begin to produce new roots and leaves.

How can you root succulents the quickest?

So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.

Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.

Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.

Always check that the stem cuttings are a respectable size for the plant’s typical size.

According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.

Where do you cut the stems of succulents?

In case you wished to propagate your own plants, we will start by explaining how to cut your succulents or cacti. What kind of cuttings you take will depend on the kind of succulent or cactus that you are cutting. While some plants can spread by a leaf, others require real cuttings to increase their size.

It’s crucial to obtain the full leaf, all the way up to the stem, if you’re trying to propagate utilizing a leaf. Your leaf will probably die if it is chopped or breaks off before the stem. Just twist the leaf to remove it from the stem; be sure to remove the entire leaf.

Use sharp scissors or pruning shears if you’re taking a full cutting to propagate your succulent. Just above a leaf, cut the stem. You have a choice of taking your cutting from the succulent’s stem or an offshoot.

What you cut for cactus cuttings depends depend on the kind of cactus you have. If the pads on your cactus are growing, pick a mature pad—not a tiny one at the top—and clip it. You should clip a columnar cactus a few inches from the top if you have one. Try to select a thinner stem for columnar cacti as they will root more quickly than thicker ones. You should make your cut as straight as you can.

Can I trim a too-tall succulent?

The majority of succulents are graceful low-growing plants that neatly tuck into cracks in rockeries, flower beds, pots, and between pavement stones. Although succulent pruning is not typically necessary, it is a simple procedure that can be used on plants that grow long and lose the compact character that makes them so coveted. Understanding how to trim a leggy succulent can help you get the plant back to the size you want while also giving you plant material for another one of these resilient, simple plants.

When you complain that your plant is too tall, you should regulate it. This could be caused by blooms, leaves, or stalks, and the plant may end up seeming smaller or not fitting into its original location. The type of plant you are growing will determine what to do if your succulents get too tall.

Plants go through a process known as etioliation when they are grown indoors or in other low light environments. The plant is stretching upward to catch more light, which causes the stem to lengthen. Transferring the plant to a southern exposure is the straightforward answer. But that leggy party is still left after this. Fortunately, it is possible to top leggy succulent plants, which will remove the excessively tall portion and encourage the growth of new, more compact shoots.

How long does it take for cuttings of succulents to take root?

Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.

Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:

1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.

2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.

3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.

4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.

  • Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
  • Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.

5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.

6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.

What succulent is the most straightforward to grow?

Having a collection of succulents might be most gratifying when you propagate them. You can increase the number of a popular plant in your yard through propagation, swap plants with friends, and even preserve a dying plant. Here are our top ten picks for beginner-friendly succulents.

Sedum rubrotinctum (Pork and Beans or Jelly Beans)

Bright crimson in direct sunlight; green in shadow. This resilient Sedum quickly fills in container gardens and rock gardens. Remove the leaves and place yourself on a damp, well-draining surface.

Echeveria ‘Lola’

one of the most productive Echeveria leaf plants. Both newcomers and seasoned collectors adore the flawlessly round rosette and the pearly pink leaves. They germinate swiftly and successfully spread through leaves in large numbers.

Sedum nussbaumerianum

difficult in dry, warm areas with little water. Easy to grow from leaf or tip cuttings. Wait for a scab to form (around one week) before planting in soil. This species’ colors and leaf shapes vary widely.

Sempervivum arachnoideum (Cobweb Houseleek)

Fast-growing and yields more offsets than you could possibly use! Plant cuttings directly in damp soil after cutting propagation, and you’ll observe roots forming in approximately a week.

Graptopetalum paraguayense (Ghost Plant)

A stunning hanging rosette succulent that may change color depending on the environment to orange, bronze, pink, and purple. It is quite simple to spread by leaves; you might even notice one growing on its own.

Echeveria colorata

Initially slow, but well worth the wait. Echeveria colorata starts out by producing lovely leaf sprouts with scarlet tips. Before removing the mother leaf from the new plant, wait until it has totally died.

Echeveria lilacina (Ghost Echeveria)

We frequently see the succulent Echeveria lilacina multiplying by itself. By planting leaves gently in soil with their roots down and leaf up, you can prevent the fast curling that occurs with leaves.

What are some uses for succulent stems?

Once a succulent has grown out, it is impossible to return to the initial plant. However, you can “repair the plant by reviving it and cultivating a new one from the cuttings and leaves. Call propagation is this procedure.

It can be a little unsettling to propagate a plant that you’ve worked so hard to nurture and develop. The good news is that some of the easiest plants to reproduce are succulents. What you should know is as follows.

Assess the Plant

Before reproducing a succulent, it’s a good idea to be aware of its species. While some species can be multiplied from both cuttings and leaves, others can only be multiplied from cuttings.

Before attempting to propagate the plant, you need also make sure that it is healthy and receiving adequate water. The best leaves are those that are plump and healthy; any leaves that are overwatered or dry won’t have a high success rate for producing new growth.

Remove Some Leaves

Make sure you can clearly see the stem of your succulent before attempting to cut it down. You might already have a beautiful piece of the stem to deal with if the plant grows quickly or has leaves that are extremely widely spaced apart.

Start by removing any dead leaves if your stem isn’t particularly visible. Once you have a clean break, move a few leaves back and forth starting at the bottom of the plant. (If the leaves come off without tearing and in good condition, you can store them to use as seed later on to grow more plants.)

Cut Stem at Soil Level

Take a clean pair of sharp shears or scissors and cut the stem at soil level once you have a clear view of the stem. It can feel unsettling and wrong, but don’t be alarmed. Unbelievably, forcing new growth on the lower area of the succulent by removing the top.

The lower part of the clipped stem should be left in the ground. Before watering, let the wound dry up for about a week to avoid any decaying. When the soil is dry after that, water every several days. Baby plants will begin to erupt from the stem’s clipped top in a few weeks, replacing it.

Pot the Top Stem

What should you do with your plant now that the top has been removed? Don’t throw it away because it can be potted and grown into a separate plant.

You must give the wound enough time to dry out in order to prevent it from rotting from moisture, just as the bottom of the stem. After a few days, cut the stem’s side leaves, leaving the top rosette alone, and put it in the ground up to the bottom leaf. When the soil is dry, water a couple times per week.

When the stem eventually develops roots, you will have a complete second plant.

If you want to view the whole procedure, have a peek at this fantastic video.