How To Take Care Of Zebra Succulent

  • Levels of Moderate Light Avoid regions with a lot of shade and direct sunshine.
  • moderate irrigation Once every two weeks in the winter and once a week or so in the summer.
  • Temperatures in interior spaces that are typical. 10C (50F) to 29C (85F)
  • Feeding When it is growing, try fertilising once every three months.

How are zebra succulents maintained?

Keep the plant continuously wet and in bright, filtered light (avoid direct sunshine). Keep a watch out for its distinctive yellow bract, which will blossom in late summer or early fall, and emphasise its graphically striped leaves with an equally daring container.

General Care for Haworthiopsis fasciata

The “Zebra Plant,” Haworthiopsis fasciata, is a typical succulent found in homes. Because it grows well indoors when properly cared for, it’s ideal for novices. It propagates easily as well, making it ideal for gifts or decorations.

Watering

Fasciata Haworthiopsis “A succulent’s normal watering requirements apply to the Zebra Plant. You should utilise the “Use the “soak and dry” method, letting the soil to dry out in between waterings.

Additionally, make sure to get our FREE watering cheat sheet to learn how to determine whether your succulents are receiving too much water (and how to save them if needed).

Where to Plant

It is preferable to grow Haworthiopsis fasciata in a container that can be taken indoors if you live in a region that has temperatures below 30 F (-1.1 C).

Partial sun is preferable for it. Plant in a part of your garden that receives 4-6 hours of morning sunlight.

If exposed to additional light, it will develop a deep red colour that indicates stress. It will turn white and dry up if exposed to too much sunlight.

Offsets

“Zebra Plant will develop tiny offsets that will grow up from the plant’s base. Simply dig these up and replant in well-draining soil after letting the offsets dry for one to two days.

Commonly Mistaken For

Attenuate Haworthiopsis There is a simple way to distinguish between the two despite their modest variances.

In contrast to Haworthiopsis attenuate, which has bumpier leaves, Haworthiopsis fasciata “Zebra Plant” has smooth inner leaves.

Compared to Haworthiopsis attenuate, Zebra Plant also has fatter leaves.

“Aloe, which can also be dark to bright green and have fat, tapering leaves, is frequently confused with the zebra plant.

Are zebra succulents sun-loving creatures?

Zebra plants thrive in medium and low light environments, which are typically found inside, unlike any other succulents. However, display them in a location where they may receive as much natural light as possible, such as a south or east-facing windowsill, if you want to bring out their magnificent red and orange hues.

Find a spot where your Zebra plant can enjoy at least 4 to 6 hours of bright light, but avoid direct sunlight, especially in the afternoon, if it’s being grown outdoors. Their extremely delicate leaves will most certainly become dry at the tips if exposed to direct sunshine, which is a sign that they are getting too much sunlight.

How long does a succulent zebra plant live?

This slow-growing succulent has a lifespan of up to 50 years! It originates from the South African province of the Eastern Cape and is a member of the Asphodelaceae family.

Due to its resemblance in appearance to its relative, Haworthia fasciata, zebra cacti are frequently mistaken for one another. The difference between the two is that attenuata has white, wart-like tubercles on both the top and bottom of the leaves, whilst fasciata only has them on the undersides of the leaves.

On either side of its leaves, there are long, slender, and rather dispersed white tubercles. Although the leaves are not fibrous, touching the white stripes will cause you to feel bumps or ridges.

My zebra plant is dying; why?

The following links may be affiliate links; please read the disclaimer. I will receive a commission if you click through and buy something without charging you more.

Beautiful indoor plants like the zebra plant (Aphelandra squarrosa) can blossom into lovely yellow blooms in the fall if given adequate exposure to intense light. But it’s also prized for having enormous, striped leaves that mimic the stripes of a zebra. It might be difficult to keep this plant happy whether you cultivate it for the flowers or the foliage (or both).

How come your zebra plant is dying, then? The most frequent causes are excessive light, insufficient watering (zebra plants require continual wetness), low humidity levels in your home, low temperatures, and/or excessive fertiliser, as the zebra plant is extremely sensitive to these factors.

Let’s examine the root of your zebra plant’s malaise and provide some solutions.

Should my zebra plant be misted?

This time, Aphelandra squarrosa is the focus. These “zebra plants” are part of a big Brazilian family, and in the humid, tropical heat of their native rain forests, they develop into large, tall bushes that blossom lavishly.

The widespread name “zebra houseplant” refers to the plant’s huge, lustrous leaves and its dark green foliage, which has white or yellow veins that resemble zebra stripes. A treasured display is created by their bracts and blossoms, which are vividly coloured. At the time of purchase, they are typically quite little, and many indoor gardeners view them as a passing acquaintance. Your Aphelandra squarrosa will only provide you with a few years of enjoyment even with exceptional zebra plant care, but don’t give up hope.

Propagation is a necessary component of zebra plant maintenance. Cuttings of 4- to 6-inch (10-15 cm) stems can be used to readily establish new plants. Take off the bottom leaves, then bury the stem cuttings in potting soil or a glass of water until new roots begin to grow. Your original plant can endure for many years in this method.

How often should zebra succulents be watered?

Levels of Moderate Light Avoid regions with a lot of shade and direct sunshine. moderate irrigation Once every two weeks in the winter and once a week or so in the summer.

What can I do to make my zebra plant bloom?

The Aphelandra squarrosa, a native of Brazil, is known as the “zebra plant” because to its white and dark green striped leaf. Zebra plants can be grown outside in USDA zones 10 and up, although gardeners in colder climates prefer to keep them indoors as houseplants. The zebra plant rarely blooms, but when it does, the bracts are spiky, bright yellow, and can reach a height of 4 inches. The plant will only produce leaves if it receives insufficient light. The secret to getting your zebra plant to blossom is lots of bright light.

When the soil’s surface starts to feel dry, water the zebra plant. Keep the soil from drying out completely. Use a towel to dry the plant’s leaves if water gets on them. Fungal infections can occur when the leaves become damp.

How are Zebra succulents grown?

The Haworthiopsis Attenuata “Zebra Plant” is a fairly common indoor plant since it can withstand a broad range of lighting conditions. They make excellent selections for indoor plants and terrarium containers because they can endure low lighting conditions for a considerable amount of time. However, they require roughly 4-6 hours of intense, filtered light every day to keep them truly content.

Place indoors in a well-lit area, preferably somewhere with a window. Though not for very long, these plants can endure low light or bad lighting. If you keep the plant in a dim area, you can occasionally transfer it to a brighter spot to meet their lighting requirements.

You can also think about utilising a grow light. Grow lights can complement the illumination needs of your plants, particularly during the long, dark winters. Here are a few grow light suggestions I have.

Check out my post on to learn more about this subject of indoor lighting for succulents “See How to Light Succulents Indoors Properly for some useful advice.

The Haworthiopsis Attenuata “Zebra Plant” thrives in environments with an abundance of bright, filtered light. Although they can withstand dim illumination, bright indirect light is preferred. They can also withstand direct sunlight, but they must be gradually acclimated to avoid scorching the plant.

Place in a bright area away from direct sunlight or full sun if maintained outside. Morning light, which is less powerful than afternoon sun, is better for them. To reduce the risk of sunburn or other sun damage, it is preferable to acclimatise the plant first before bringing it outdoors or increasing the quantity of sunshine it receives.

Increase the amount of sunshine it gets gradually until it is used to the sun completely. Remember that even if a plant is accustomed to full sun, it is still possible for it to get sunburned during a heat wave or other periods of extreme heat. In Northern California, where summertime temperatures can exceed 100F or 37.8C, sunshades are a genuine lifesaver for my plants. Here are a few sunshades and sun protection ideas I have.

Please view my post for further information and clarification regarding the need for outdoor sunshine “To learn some helpful information, read How Much Sunlight Do Succulents Need Outside.

How is a small zebra plant cared for?

In temperate summer climates, plant in full sun; in the Deep South’s sweltering summer months, give Little Zebra some afternoon shade. It can grow in moist locations where other plants cannot, whether the soil is rich or typical for a garden. As long as it can find the moisture it needs, it can tolerate acidic to neutral soil pH ranges of 5.8 to 6.2 and still survive. Fertilization is normally not necessary, but in order to provide this hardy plant with everything it needs to live, you can improve exceptionally poor soil by incorporating some well-composted organic matter into the top layer. If you are putting this in a patio planter or during particularly long dry spells, make sure to water it frequently. A good quality mulch applied to the root zone can assist retain moisture and shield the plant from winter frost heave.

Little Zebra Dwarf produces so many flowering stems that deadheading is not required, and the songbirds, who enjoy the seeds, are drawn to the spent heads. To make room for the new spring growth, prune your grass in the late fall or early winter down to the ground or just a few inches above ground. Zebra grass is normally a healthy plant with little insect or disease issues.

Is the zebra succulent uncommon?

Another thing to keep in mind is that Haworthia fasciata is a rare species. Many beginners who are new to succulents mistakenly believe that zebra plants are a stripped-down version of aloe. It isn’t.

How can a zebra plant become bushy?

I advise choosing an African violet potting mix if you choose to utilise potting mixes. Those include adequate water-absorbing substance to maintain the soil’s moisture.

Would you rather create your own potting soil? No issue! I use a mixture that consists of 2 parts peat moss, 1 part coarse sand or perlite, and 1 part garden soil. If you choose, you can substitute coconut coir for peat. Leaf mould is also quite effective.

For optimum growth, your pH level should be in the somewhat acidic range (5.6-6.0). Avoid making your soil too acidic for this plant. You keep your soil’s pH within the proper range, make sure to test it.

Fertilizer

Zebra plants are tiny, ravenous creatures. It takes a lot of food to grow those blooms! Aim for feedings every one to two weeks during the spring and summer growing seasons.

It’s recommended to feed your aphelandra squarrosa using a water-soluble, quick-release plant food. Choose a balanced fertiliser mix and dilute it in accordance with the manufacturer’s recommendations. Winter is not the time to fertilise.

Repotting

Don’t rush the annual repotting of your zebra plant. In fact, despite being rather rootbound, it grows nicely! The majority of varieties may thrive and bloom in a 5–6 pot.

Repotting should be done in the spring, before the plant emerges from its winter hibernation, if you do chose to do so. Use a pot that is just one size larger than the current pot. Repot the plant in new potting soil after removing as much soil as you can from the roots without hurting them.

Pruning

Pay close attention to your flower bract. It’s crucial to get rid of flowers as soon as they start to fade. The lower leaves could start to droop and fall off if they are left on the plant for too long. Only stems with leaf tufts at the top will remain after this.

Once the bract has died, you can cut the stem and leaves back to a pair at the base of the plant. In the spring, this will promote a bushier growth pattern.

Propagation

Zebra plant propagation is rather easy and can be accomplished through stem cuttings or air layering.

Cuttings should be buried in a mixture of damp peat and perlite. To keep the moisture in, wrap them in plastic. These trimmings ought to be 4-6 inches long. Put them somewhere warm, between 70 and 80 degrees, and with some shade.

Choose a healthy stem and cut out the leaves in the middle of the stem to air layer. Do not forget to have a few inches of naked stem on hand. Afterward, cut a hole into the stem midway.

To keep the wound open, insert a toothpick. Next, apply rooting hormone to the wound’s surface. Sphagnum moss that has been soaked is wrapped around the wound. Wrap it with plastic to keep it in place. To stop moisture from evaporating, secure the plastic wrap’s ends to the stem with a tie.

You ought to be able to observe roots forming in the moss about a month to a month and a half. Once the plant is established, you can trim the stem and pot it again, but make sure to maintain a high humidity level.

Zebra Plant Flower Production

This kind of plant is difficult to get to bloom. When you locate a zebra plant for sale, the blossom is frequently already present. How can you make your zebra plant bloom once more?

Start by concentrating on the plant’s foliage and ensuring that it survives the winter. For two months in the winter, relocate the plant to a cooler area. Bring it back to a warmer setting with plenty of bright lighting once spring arrives.

Before your plant blooms, it needs roughly three months of bright, indirect light. Blooming is stimulated by the brightness of the light. It doesn’t really matter how long the day is!

Your plant should blossom in three months if it receives enough sunshine, fertiliser, and humidity. Once the flower bract has finished blooming, trim it back. If your timing is right, you might be able to encourage another bloom to emerge in the fall.

Your plant might not flower if the humidity, lighting, or water level are off. That might not be a problem because it looks stunning as a plant with foliage!