- Levels of Moderate Light Avoid regions with a lot of shade and direct sunshine.
- moderate irrigation Once every two weeks in the winter and once a week or so in the summer.
- Temperatures in interior spaces that are typical. 10C (50F) to 29C (85F)
- Feeding When it is growing, try fertilising once every three months.
How are zebra succulents watered?
Zebra succulents are specially adapted to thrive in hot, arid environments with infrequent rainfall and rocky soil. For example, they store moisture in their thick leaves, which are likewise designed to minimise water loss through transpiration.
Zebra succulents prefer dryer conditions than most plants since they are so well suited to thriving in drought, and they are more prone to experience issues from overwatering than from underwatering, such as foliage turning brown or yellow and root rot.
It’s crucial to mimic the watering conditions of their natural environment if you want to take good care of zebra succulents in your home.
Only water your zebra succulent when the earth is absolutely dry since zebra succulents need the soil to dry out between sessions of watering. To attain the ideal balance of moisture, zebra succulents often need to be watered once every two to three weeks with a good soak.
Potting soil does not always dry out at the same rate for a variety of reasons, including:
- climate’s humidity and temperature range.
- How big the pot is (large pots dry out much slower then smaller pots).
- Whether the zebra succulent is near a heat source or in an air stream.
- the potting soil’s capacity to hold moisture.
Feel the soil at the bottom of the pot via the drainage hole to determine how frequently to water zebra succulents according to the climate and conditions where you live. Delay watering for a few days if the soil feels damp. This is the ideal time to water if the soil seems dry.
When you know how long it typically takes for the soil surrounding your zebra succulent to dry out, you can create a watering schedule that suits your needs and faithfully imitates the moisture and watering conditions in their natural habitat.
Symptoms of Watering Zebra Plants Too Often
Zebra succulents shouldn’t need to be watered more regularly than once a week, so stop.
Zebra succulents exhibit signs of stress when their leaves turn yellow or brown and have a mushy, soft texture. If the leaves become black, this may be a sign of root rot brought on by excessive watering.
Reduce your watering and allow the potting soil to totally dry out around the roots of the zebra succulent if its leaves start to turn brown or yellow and have a soft texture so that it can recover.
How are zebra succulents maintained?
Keep the plant continuously wet and in bright, filtered light (avoid direct sunshine). Keep a watch out for its distinctive yellow bract, which will blossom in late summer or early fall, and emphasise its graphically striped leaves with an equally daring container.
General Care for Haworthiopsis fasciata
The “Zebra Plant,” Haworthiopsis fasciata, is a typical succulent found in homes. Because it grows well indoors when properly cared for, it’s ideal for novices. It propagates easily as well, making it ideal for gifts or decorations.
Watering
Fasciata Haworthiopsis “A succulent’s normal watering requirements apply to the Zebra Plant. You should utilise the “Use the “soak and dry” method, letting the soil to dry out in between waterings.
Additionally, make sure to get our FREE watering cheat sheet to learn how to determine whether your succulents are receiving too much water (and how to save them if needed).
Where to Plant
It is preferable to grow Haworthiopsis fasciata in a container that can be taken indoors if you live in a region that has temperatures below 30 F (-1.1 C).
Partial sun is preferable for it. Plant in a part of your garden that receives 4-6 hours of morning sunlight.
If exposed to additional light, it will develop a deep red colour that indicates stress. It will turn white and dry up if exposed to too much sunlight.
Offsets
“Zebra Plant will develop tiny offsets that will grow up from the plant’s base. Simply dig these up and replant in well-draining soil after letting the offsets dry for one to two days.
Commonly Mistaken For
Attenuate Haworthiopsis There is a simple way to distinguish between the two despite their modest variances.
In contrast to Haworthiopsis attenuate, which has bumpier leaves, Haworthiopsis fasciata “Zebra Plant” has smooth inner leaves.
Compared to Haworthiopsis attenuate, Zebra Plant also has fatter leaves.
“Aloe, which can also be dark to bright green and have fat, tapering leaves, is frequently confused with the zebra plant.
How long does a succulent zebra plant live?
This slow-growing succulent has a lifespan of up to 50 years! It originates from the South African province of the Eastern Cape and is a member of the Asphodelaceae family.
Due to its resemblance in appearance to its relative, Haworthia fasciata, zebra cacti are frequently mistaken for one another. The difference between the two is that attenuata has white, wart-like tubercles on both the top and bottom of the leaves, whilst fasciata only has them on the undersides of the leaves.
On either side of its leaves, there are long, slender, and rather dispersed white tubercles. Although the leaves are not fibrous, touching the white stripes will cause you to feel bumps or ridges.
My zebra plant is dying; why?
The following links may be affiliate links; please read the disclaimer. I will receive a commission if you click through and buy something without charging you more.
Beautiful indoor plants like the zebra plant (Aphelandra squarrosa) can blossom into lovely yellow blooms in the fall if given adequate exposure to intense light. But it’s also prized for having enormous, striped leaves that mimic the stripes of a zebra. It might be difficult to keep this plant happy whether you cultivate it for the flowers or the foliage (or both).
How come your zebra plant is dying, then? The most frequent causes are excessive light, insufficient watering (zebra plants require continual wetness), low humidity levels in your home, low temperatures, and/or excessive fertiliser, as the zebra plant is extremely sensitive to these factors.
Let’s examine the root of your zebra plant’s malaise and provide some solutions.
How is a zebra plant maintained indoors?
This time, Aphelandra squarrosa is the focus. These “zebra plants” are part of a big Brazilian family, and in the humid, tropical heat of their native rain forests, they develop into large, tall bushes that blossom lavishly.
The widespread name “zebra houseplant” refers to the plant’s huge, lustrous leaves and its dark green foliage, which has white or yellow veins that resemble zebra stripes. A treasured display is created by their bracts and blossoms, which are vividly coloured. At the time of purchase, they are typically quite little, and many indoor gardeners view them as a passing acquaintance. Your Aphelandra squarrosa will only provide you with a few years of enjoyment even with exceptional zebra plant care, but don’t give up hope.
Propagation is a necessary component of zebra plant maintenance. Cuttings of 4- to 6-inch (10-15 cm) stems can be used to readily establish new plants. Take off the bottom leaves, then bury the stem cuttings in potting soil or a glass of water until new roots begin to grow. Your original plant can endure for many years in this method.
I have a zebra succulent; how often should I water it?
moderate irrigation Once every two weeks in the winter and once a week or so in the summer. Feeding When it is growing, try fertilising once every three months.
Are zebra plants simple to maintain?
One of the more challenging houseplants to take care of is Aphelandra squarrosa. That said, it’s not impossible.
It requires a little more care than ivy, pothos, cast iron plants, or other less demanding varieties. But the real reward comes with that devotion.
Light & Temperature
When exposed to direct, bright light, zebra plants flourish. While it can handle some shade, if not given adequate light, it won’t flower as frequently or for as long. Avoid direct sunlight at all costs because it can burn the leaves of your plant.
Between 65 and 80 degrees is the ideal range for developing your zebra plant. Fortunately, this is inside the ideal indoor temperature range for the majority of people!
Never let your zebra plant spend an extended period of time below 55 degrees. The lovely foliage of the plant may be harmed.
Make sure that the zebra plant is in a protected area if you wish to grow it outside. It requires illumination, but not from the sun. Placement behind a substantial tree canopy or on a porch ought to work nicely. There is also the option of growing in a greenhouse to raise the humidity.
Water & Humidity
Zebra plants might be a little difficult to care for because they are susceptible to both over and underwatering. Throughout the active growing season, make sure the soil is continually moist.
You can wait a little bit longer between waterings in the winter. A just wet climate is appropriate for those cooler months.
Use filtered water that is just warm enough to be comfortable for the greatest outcomes. This simulates the temperature of an ordinary downpour.
Your zebra plant eats up all the dampness! It prefers a humidity of between 60 and 70 percent. This may be an issue indoors, particularly if it’s close to a vent.
Keep your plant far away from heaters and direct vents. Only mist its leaves when you think the moisture will swiftly evaporate. When possible, avoid areas with a lot of standing water on the leaves.
Another option is to set a dish of water and some pebbles underneath it. Overwatering is avoided since the pebbles keep the pot out of the water. The water will increase the surrounding area’s humidity.
In the worst case scenario, start a humidifier to create cold, wet air nearby. Your plant remains healthy and happy as a result!
How can you recognise a fading zebra plant?
- The most common causes of a dying zebra plant are overwatering and slow-draining, moist soils, which make the leaves turn brown or yellow as a sign of stress. If zebra plants are exposed to too much sunshine, they will turn white. Due to dry stress, the leaf tips turn brown and the lower leaves begin to die.
- Reduce the frequency of zebra plant waterings so that the soil has a chance to dry up. Plant zebra succulents in pots with drainage holes on the bottom so that any extra water may drain. The soil should drain well. In order to prevent root rot, periodically empty saucers, trays, and outer pots.
- Zebra succulents should be located in a bright, indirect area. Overexposure to the sun may result in leaves that turn red, white, or even yellow.
- To prevent drought stress and to revitalise the plant, give zebra succulents a generous soak of water and place them in quiet parts of the home.
What can I do to make my zebra plant bloom?
The Aphelandra squarrosa, a native of Brazil, is known as the “zebra plant” because to its white and dark green striped leaf. Zebra plants can be grown outside in USDA zones 10 and up, although gardeners in colder climates prefer to keep them indoors as houseplants. The zebra plant rarely blooms, but when it does, the bracts are spiky, bright yellow, and can reach a height of 4 inches. The plant will only produce leaves if it receives insufficient light. The secret to getting your zebra plant to blossom is lots of bright light.
When the soil’s surface starts to feel dry, water the zebra plant. Keep the soil from drying out completely. Use a towel to dry the plant’s leaves if water gets on them. Fungal infections can occur when the leaves become damp.
A zebra plant blooms, right?
Aphelandra squarrosa, sometimes known as the Zebra HousePlant, has stunning leaves and exotic-looking flowers. The huge, glossy, dark green leaves of the Zebra Plant have a striking white midrib and white veins, earning it the name. Zebra houseplants have purple-tinged stems and foliage. A Zebra Plant’s bright yellow flowers appear from bracts at the end of a long stem. Native to the jungles of Brazil, zebra plants are typically table plants that are approximately a foot tall. Zebra houseplants might need a little more maintenance, but they are a stunning, unusual houseplant that is well worth it.
Zebra plants need extremely bright indirect light, but not direct sunlight.
INSTRUCTIONS FOR CARE WATERING: Never let the soil of a zebra plant completely dry out; instead, keep it damp but not saturated. If a zebra plant is either over- or under-watered, the bottom leaves fall off.
FERTILIZER: In the spring and summer, feed a zebra plant once a week with a basic houseplant food diluted to half the suggested strength.
Temperatures between 65 and 75 degrees are ideal for zebra plants. Zebra plants lose their leaves when exposed to low temperatures for an extended period of time (below 60 degrees).
Zebra plants, which are endemic to the Brazilian jungles, prefer extremely high humidity. Put a Zebra Plant on a tray with damp stones to assist the area around it become more humid.
FLOWERING: The four-sided, golden spike of overlapping bracts known as a zebra plant bears flowers. The zebra plant’s lovely bracts are there for a month or two while the yellow flowers are only present for a few days. Remove the entire spike of a Zebra Plant once the bract’s vivid yellow colour has faded.
PESTS: Whiteflies, Mealy Bugs, Aphids, scale, and spider mites could all pose a problem for a zebra plant, despite their relative pest resistance. The green solution can be used to cure all of these houseplant pests, but you should avoid spraying flowers on zebra plants.
DISEASES: Fungal Leaf Spot Plant Disease is made more likely by the Zebra Plant’s preference for high humidity. To avoid Leaf Spot Disease, try to maintain dry leaves and promote good air circulation around zebra plants.
A fast-draining, highly organic potting soil, like an African Violet mix, is ideal for zebra plants.