How To Take Care Of Zebra Cactus

  • Levels of Moderate Light Avoid regions with a lot of shade and direct sunshine.
  • moderate irrigation Once every two weeks in the winter and once a week or so in the summer.
  • Temperatures in interior spaces that are typical. 10C (50F) to 29C (85F)
  • Feeding When it is growing, try fertilising once every three months.

General Care for Haworthiopsis fasciata

The “Zebra Plant,” Haworthiopsis fasciata, is a typical succulent found in homes. Because it grows well indoors when properly cared for, it’s ideal for novices. It propagates easily as well, making it ideal for gifts or decorations.


Fasciata Haworthiopsis “A succulent’s normal watering requirements apply to the Zebra Plant. You should utilise the “Use the “soak and dry” method, letting the soil to dry out in between waterings.

Additionally, make sure to get our FREE watering cheat sheet to learn how to determine whether your succulents are receiving too much water (and how to save them if needed).

Where to Plant

It is preferable to grow Haworthiopsis fasciata in a container that can be taken indoors if you live in a region that has temperatures below 30 F (-1.1 C).

Partial sun is preferable for it. Plant in a part of your garden that receives 4-6 hours of morning sunlight.

If exposed to additional light, it will develop a deep red colour that indicates stress. It will turn white and dry up if exposed to too much sunlight.


“Zebra Plant will develop tiny offsets that will grow up from the plant’s base. Simply dig these up and replant in well-draining soil after letting the offsets dry for one to two days.

Commonly Mistaken For

Attenuate Haworthiopsis There is a simple way to distinguish between the two despite their modest variances.

In contrast to Haworthiopsis attenuate, which has bumpier leaves, Haworthiopsis fasciata “Zebra Plant” has smooth inner leaves.

Compared to Haworthiopsis attenuate, Zebra Plant also has fatter leaves.

“Aloe, which can also be dark to bright green and have fat, tapering leaves, is frequently confused with the zebra plant.

Do zebra cacti grow indoors?

Zebra plants thrive in medium and low light environments, which are typically found inside, unlike any other succulents. However, display them in a location where they may receive as much natural light as possible, such as a south or east-facing windowsill, if you want to bring out their magnificent red and orange hues.

Find a spot where your Zebra plant can enjoy at least 4 to 6 hours of bright light, but avoid direct sunlight, especially in the afternoon, if it’s being grown outdoors. Their extremely delicate leaves will most certainly become dry at the tips if exposed to direct sunshine, which is a sign that they are getting too much sunlight.

Do zebra cacti require direct sunlight?

A quick-draining potting soil is necessary for the Haworthia Zebra. You may also use a cactus mixture, but keep the sand out of it. Perlite can be added, and it won’t prevent the mixture from draining, so that’s okay.

What are the Sunlight Requirements of the Zebra Succulent?

The zebra succulent enjoys exposure to strong, direct sunlight. In either full or partial shade, it won’t do well. They tend to lean and grow outdoors in the shade by nature.

Bright light is preferred for Haworthia species, but not direct sunshine. They frequently reside in the shade of a rock or other object in their natural habitat. They thrive in a space with an east or west facing window that lets in bright light for a few hours each day. The plant’s green hue will deteriorate if it doesn’t receive enough light.

When taken indoors, a haworthia plant from the outside won’t thrive. Additionally, an indoor one cannot thrive outside. Your zebra succulent may wither or get burnt if you move suddenly.

Your Haworthia zebra’s leaves may be turning yellow or white. Either colour change could indicate that your plant is receiving more direct sunlight than is necessary.

What is the Humidity Requirement of the zebra succulent Plant?

Room humidity is necessary for the Haworthia Zebra to survive. They are a great option for indoor growing because of this. However, don’t forget to give them adequate ventilation. They can be placed in a window sill or other open area of your house.

You don’t need to buy a humidifier because the Zebra Succulent doesn’t have any particular humidity needs!

How Should I Water the Zebra Succulent?

The soak and dry method needs to be used to water the Haworthia Zebra. Before watering, let the soil totally dry out. Its large, dense leaves can hold a lot of water.

How to Prune the Zebra Succulent?

In the event of dead leaves, pruning the haworthia zebra is important. Other than that, the zebra succulent develops quite slowly. It won’t grow more quickly if you prune it needlessly.

Any leaves that seem diseased need to be pruned. Keep in mind to make the cuts with a clean or sterilised knife.

How to Repot the Zebra Succulent?

Rarely does the Zebra Plant require repotting. It takes a long time for these succulents to develop. They can only increase in height by a maximum of 5 inches. You can group the Haworthia Zebra together when repotting them.

Use shallow containers for these little plants. As a result, drainage of water will be made simpler. The spring and summer months are when the zebra succulent grows. You can use the old pot, but make sure the mixture is entirely new and that the soil is replaced.

Large pots are unnecessary for zebra succulents because they don’t grow very much. If you have a lot of clusters, the breadth is doable. But be certain that the depth is never deep.

How is a zebra plant cared for?

Keep the plant continuously wet and in bright, filtered light (avoid direct sunshine). Keep a watch out for its distinctive yellow bract, which will blossom in late summer or early fall, and emphasise its graphically striped leaves with an equally daring container.

What can I do to make my zebra plant bloom?

The Aphelandra squarrosa, a native of Brazil, is known as the “zebra plant” because to its white and dark green striped leaf. Zebra plants can be grown outside in USDA zones 10 and up, although gardeners in colder climates prefer to keep them indoors as houseplants. The zebra plant rarely blooms, but when it does, the bracts are spiky, bright yellow, and can reach a height of 4 inches. The plant will only produce leaves if it receives insufficient light. The secret to getting your zebra plant to blossom is lots of bright light.

When the soil’s surface starts to feel dry, water the zebra plant. Keep the soil from drying out completely. Use a towel to dry the plant’s leaves if water gets on them. Fungal infections can occur when the leaves become damp.

What is the lifespan of a zebra cactus?

This slow-growing succulent has a lifespan of up to 50 years! It originates from the South African province of the Eastern Cape and is a member of the Asphodelaceae family.

Due to its resemblance in appearance to its relative, Haworthia fasciata, zebra cacti are frequently mistaken for one another. The difference between the two is that attenuata has white, wart-like tubercles on both the top and bottom of the leaves, whilst fasciata only has them on the undersides of the leaves.

On either side of its leaves, there are long, slender, and rather dispersed white tubercles. Although the leaves are not fibrous, touching the white stripes will cause you to feel bumps or ridges.

My zebra plant is dying; why?

The following links may be affiliate links; please read the disclaimer. I will receive a commission if you click through and buy something without charging you more.

Beautiful indoor plants like the zebra plant (Aphelandra squarrosa) can blossom into lovely yellow blooms in the fall if given adequate exposure to intense light. But it’s also prized for having enormous, striped leaves that mimic the stripes of a zebra. It might be difficult to keep this plant happy whether you cultivate it for the flowers or the foliage (or both).

How come your zebra plant is dying, then? The most frequent causes are excessive light, insufficient watering (zebra plants require continual wetness), low humidity levels in your home, low temperatures, and/or excessive fertiliser, as the zebra plant is extremely sensitive to these factors.

Let’s examine the root of your zebra plant’s malaise and provide some solutions.

How frequently should I water a zebra plant?

When the potting dirt around zebra succulents has sufficiently dried out, water them. The zebra plant’s typical watering needs are met by giving it a good soak once every two to three weeks to prevent root rot. Before watering your zebra succulent, make sure the soil is dry.

Knowing how frequently to water zebra succulents, also known as zebra Haworthia and Haworthiopsis fasciata, is crucial because they are prone to root rot brought on by excessive watering and poorly draining soils.

Zebra succulents can go into a state of hibernation in the summer as a response to high temperatures and as a method to cope with dryness, thus they have varied watering needs at different times of the year.

To avoid water stress and maintain the health of your zebra plant, the ideal watering schedule should be used in conjunction with coarse, well-draining, succulent soil and the appropriate pot.

For additional information on how to determine your climate’s conditions and the best times of year to water your zebra succulent, keep reading.

When ought my zebra plant to be watered?

Bright, filtered light is ideal for your zebra plant. It can tolerate a few hours of direct morning sunlight, but it should stay out of the sun for long periods of time, especially in the afternoon, as this might scorch the leaves. Low light conditions are inhospitable to zebra plants.

When the top 25 percent of the soil is dry, water your zebra plant. To avoid root rot, moisten the saucer completely and make sure to drain any extra water. Water should not be sprayed directly on the leaves because this can promote crown rot by funnelling down the stems.

Your zebra plant needs between 60 and 70 percent humidity to thrive. The plant won’t survive in conditions with low humidity because the leaf margins will turn brown and new leaves might not form properly. To increase humidity, group plants together to create a humid microclimate, put a humidifier nearby, or use a pebble tray. Away from air vents, which could be drying to the plant. Perhaps a sizable humidity dome with a vent would be useful.

For optimum growth, your zebra plant prefers temps of 65°F and above. Steer clear of chilly draughts and abrupt temperature swings.

During the spring and summer, apply a liquid houseplant fertiliser once every one to two weeks, diluted to half the recommended concentration for optimal results. In order to properly feed your plant, never add fertiliser to dry soil. Instead, wait until the soil is humid.

Although the zebra plant is thought to be non-toxic, we advise using gloves when handling it because the sap might irritate delicate skin.

Your zebra plant might generate numerous flower spikes if the correct circumstances are present. The stunning, vivid yellow flowers, which can last for up to six weeks on the plant, are actually bracts, a form of modified leaf structure. Simply trim the stem as close to the plant’s root as you can when the bracts begin to turn brown. After flowering, your plant will enter a resting phase during which it will consume less water. Until you notice new leaf growth, you should also stop fertilising during this resting period.

When ought my zebra succulent to be repotted?

The genus and common name for a collection of tiny, rosette-forming succulents that are indigenous to southern Africa is Haworthia. The majority of haworthia varieties are grown as indoor plants outside of U.S. Department of Agriculture hardiness zones 10b and higher since they cannot withstand freezing temperatures. Haworthias rarely outgrow their containers because they grow slowly, but they should still be replanted in the spring every few years. Repotting haworthias is a straightforward procedure, but in order for the plant to thrive again, the right container and soil mix must be used.

Haworthias should be replanted every two to three years to maintain fresh soil or if they grow to within 1/4 inch of the edge of their container. Since haworthias do not react well to root disturbance, avoid frequent transplanting.

Purchase a drainage-holed pot made of ceramic, plastic, or terra cotta that is no bigger in diameter than the haworthia’s original planter and no smaller. Use of catch-pots or extremely deep containers is discouraged since they obstruct regular drainage, which can lead to rot in haworthias.

Perlite, horticultural pumice, or poultry grit should be mixed in an equal amount with fertilizer-free potting soil in a bucket. Stir the perlite and potting soil together until they are thoroughly combined. The soil mixture should occupy the bottom one-third of the ceramic pot. Avoid compacting the soil because doing so will make it less permeable.

Take the haworthia out of the pot. Turn the pot on its side while putting your palm over the opening. Shake or jiggle the pot gently until the root ball comes out. When taking the haworthia out of the pot, try to avoid pulling on it since you could easily harm the leaves or roots.

Remove roughly half of the soil from the area surrounding the root ball. In the new pot, tuck the roots into the soil. While you backfill around the roots with the soil mixture, keep the haworthia upright. To help the dirt settle, shake the container occasionally.

Water the area surrounding the haworthia’s base until the top inch of the soil feels damp. If the earth noticeably settles after watering, scatter some soil around the haworthia.