Simply by cutting some succulents, you can get them to grow in the direction you wish. Trim your succulent just above any branch or bud that is developing in the appropriate direction, and it will begin to grow in that direction. This method is frequently used to help shape woody succulents like jade plants.
Are succulents intended to be trimmed?
Succulents benefit most from pruning at the start of their growing season, although you can prune them at any time. If you prune around the end of the growing season, new growth might not appear as rapidly, but it will develop gradually and accelerate once they begin to grow vigorously again.
There are numerous succulents that grow best in the summer, but there are also quite a few that grow best in the winter. To determine when your succulents are actively developing, check at this dormancy table.
My succulents are often pruned in the spring, after spending the winter indoors. Typically, they become quite stretched out and lose some of their initial beauty.
I can freshen the arrangement by pruning them without needing to buy new plants. It’s a fantastic approach to grow your garden!
How do you keep your form succulent?
As we all know, not all succulents get lanky due to inadequate sunshine. Because of the way some succulents develop, they can become lanky. Here’s how to keep your succulents from growing lanky as a result of inadequate light:
- Whether inside or outside, make sure they are getting enough sunlight. The ideal amount of daylight is between four and six hours every day.
- Succulents grown indoors are more likely to become lanky. Put them close to the house’s brightest window. If required, relocate the plant to a more light-filled area. If at all possible, provide the plant access to the outdoors. To augment the plant’s illumination requirements, think about utilizing a grow lamp.
- Ensure that no taller plants in a planter are blocking them. The planter was outdoors and receiving full sun, just like what occurred to my plant up top, however the plant was being obstructed by taller plants. When potting your plants, it’s ideal to think ahead to determine which ones will work best with which ones. But even if you don’t, the problem is easy enough to rectify. Simply remove the plant—whether it is tall, stretched, or both—from the planter and repotted it in a separate planter. Check out this post, “Revamping an Overgrown Succulent Fairy Garden,” to see how I did it.
- To ensure that every plant in the planter receives enough sunshine, turn the pot. You might need to rotate the pot occasionally to ensure that all of the plants are receiving enough sunlight, depending on where it is positioned and how the sun strikes the plants. My planter gets a lot of early sun, but because it is at an angle, the plants behind it don’t get as much light and are beginning to sag. To ensure that all the plants receive sunlight, simply rotate the pot periodically.
- Avoid overfeeding and overfertilizing your succulents. Because succulents are light feeders, overfertilizing will cause the plant to spread out and result in inferior growth. This is a result of the plant’s inability to support its own pace of growth due to its excessive rate of growth. It is advisable to use 1/4 to 1/2 strength of the fertilizer’s suggested dosage. For the majority of succulents, the active growing season is from early spring to late fall. Fertilize at this time. Avoid fertilizing in the late fall and winter when growth typically slows.
Leggy succulents can occasionally be very attractive, especially if they begin to cascade down the pot. Many succulents naturally grow in this manner, which adds to their appeal. However, there is usually a fast treatment for it and the plant will recover quickly once the issue has been resolved if your succulents are growing leggy from lack of light.
What happens if you remove a succulent’s top?
A succulent cannot return to its original compact height and shape once it has been stretched out. But don’t worry!
Start by using good-quality scissors to trim off the succulent’s top (I adore this pair so much! Definitely worth every cent! Leave 2-3 leaves on the base for at least an inch or two. If you leave a few leaves on the base to absorb sunlight, the base will thrive.
I’ve seen bare stems produce new offshoots, but it takes a lot longer than when I leave a few leaves on the stem. You can trim some of the stem to shorten the cutting if the cutting (the top portion you cut off) is too long for your taste.
Allow the base and the cutting to dry for a few days. You can plant the cutting in soil and start watering it once the cut end has calloused over (totally dried out and appears “scabbed”).
Cuttings do, in my experience, require a little bit more frequent watering than a fully rooted plant. To prevent the stem from becoming too soggy and rotting, use a soil that has a really good drainage system. Here is more information on how to grow succulents from cuttings.
Within a few days, maybe, but most probably within two to three weeks, the cutting should begin to give off roots. You should reduce watering as the roots take hold in order to put the plant on the same “schedule” as fully rooted plants.
Within a few weeks, the base, or original plant, will begin to produce additional offshoots. This plant can still be taken care of in the same manner as before the cut.
The leaves you initially left on the base plant can eventually wilt or drop off. Although highly common, this won’t always occur.
But if they do come off, don’t panic! Without the “parent leaves,” the young rosettes will still be able to develop.
Why is my succulent gaining height rather than width?
THE AFFILIATE LINKS IN THIS POST COULD BE USED. FOR DETAILS, PLEASE REFER TO THE DISCLOSURE POLICIES.
Your succulent does it appear different? Are you perplexed as to why it is becoming so stretched-out, tall, and leggy?
Your succulent is experiencing etiolation if it is expanding vertically rather than horizontally. Your succulent needs more light, to put it simply.
Sadly, damage that has already been done cannot be undone. But it can bounce back. Your stretched succulent can be propagated, which will result in more plants. Win!
Let’s examine this stretched Crassula perforata more closely. Find out what caused this to happen and how to solve it.
Visit How to Grow Succulents Indoors to catch up on general care for succulents.
Why is my succulent expanding vertically?
We adore cacti. They look very charming in any room of your house, are simple to care for, and are understanding to those of us who lack a green thumb. They can withstand extreme dryness and heat both indoors and out, making them adaptable. They work well both individually and together in a container garden. It would be difficult to find someone who doesn’t gush about how lovely and simple these tiny plants are to maintain indoors.
However, nobody warns you that your succulent might begin to alter shape. Here’s some information on why your succulent might be growing taller if you’ve seen it.
Why It’s Happening
Etiolation is the process through which a succulent begins to develop a longer stem and paler, less densely packed leaves. Etiolation is most frequently brought on by a plant not receiving enough sunlight, which results in a change in the plant’s development, shape, and color. Since indoor succulents are rarely exposed to direct sunlight for lengthy periods of time, this problem most frequently affects them, however it can affect any succulent.
How To Fix Succulent Stretching
There are strategies to control the growth of your lanky plant even when it is impossible to make it again compact. Start by attempting to add extra light to its regular routine. Your succulent won’t be able to grow much longer if you do this.
Pruning your plants is the best technique to try and “recorrect” the growth. Take a sharp pair of shears, and make a cut directly above a row of leaves. Depending on the kind of succulent you own, the precise place will vary. You should leave the plant with a sufficient number of strong leaves so that it can continue to photosynthesize and survive. By doing this, you may get rid of a lot of the undesired, leggy growth without damaging the current plant. In addition, you can use the clippings to produce a fresh, healthy plant. After trimming your succulent, you should allow the cut end to completely dry in a well-lit place so that a callus can develop over the exposed end. Usually, this takes two to three days. The clipping can then be placed straight in the ground to produce roots over time.
For these new clippings and the freshly cut succulent, you can apply what you’ve learned about etiolation and how to prevent it in order to avoid repeating the same growth pattern.
Why is my cactus growing lanky?
Almost all succulents will expand “if not given enough light, they become lanky. But more light-sensitive than other succulents are those that change color in response to stress. Their response can be swift, releasing etiolated “growth in just a couple of days. Additionally, stretching out succulents with rosette shapes like Echeveria, Graptoveria, and Graptosedum would make them appear worse from an aesthetic standpoint.
Your Succulent Isn’t Getting Enough Light
All plants require light, but succulents particularly crave it. Your pal may be leggy if you don’t provide a sunny area where they can soak up the light.
Insufficient sunshine causes succulents to develop lengthy stems. They begin to turn and spread out in search of light during a process known as etiolation, which gives them a “leggy appearance with a long stem and smaller, spaced-out leaves.
It can be challenging to determine how much light your plant needs right immediately because every plant is unique. Try transferring the succulent to an area where it will receive more light if you find it starting to grow a long stem without adding more leaves. You might want to think about buying a tiny tabletop grow light if your house doesn’t have a place where the sun shines.
What does a thriving succulent resemble?
Succulents are fashionable and trendy plants to have about your house or place of business, but they can be difficult to maintain. We are here to assist you in maintaining the health and vitality of your planted bundles of delight. This blog post will teach you how to correctly water your succulents, where to keep them, and how to recognize the telltale indications of a succulent in trouble.
Starting Off On The Right Foot
You must begin with a succulent that is in good shape if you want to give your plants the best chance of surviving. Fortunately, this shouldn’t be a concern if you get your succulents from Succulent Bar! We purchase our succulents from nearby plant nurseries, and we carefully choose each succulent we offer to our clients. Our succulents are handled with the utmost care and are guaranteed to be in excellent condition when received, whether they are shipped or purchased in person.
Succulents with brilliant colors, firm leaves, and sluggish growth are healthy. Succulents are not designed to expand rapidly. So, despite the fact that this would appear to be a bad indication, it actually is. Additionally, you could occasionally discover dried leaves at the base of your succulent, but this is also a positive sign. Succulents actually grow by losing their old leaves. Dried leaves indicate healthy growth in your succulent.
Light
In general, succulents need a lot of indirect light, and the majority of species will burn in hot light. Sunlight that filters through objects like window coverings, tree leaves, or bounces off of walls is referred to as indirect sunlight (think a covered patio). Usually, 6 to 8 hours of sunlight per day are ideal. The optimum location for a succulent indoors is on a sunny window sill that faces south or west.
Water
Compared to most plants, succulents need far less water and less frequent irrigation. The majority of succulents usually die from overwatering. Check the soil of your succulent as a general rule. Every time you water, your soil should be completely dry. Following that, you’re welcome to water with 1-2 teaspoons of water and make adjustments. A little water goes a long way because the majority of succulents have very shallow root systems. Succulents dislike having their roots wet for an extended period of time, or having “wet feet.”
How to Water
If water remains on the leaves of succulents for too long, they are prone to easy decay. It is best to lift your succulent’s leaves and water the plant’s base as opposed to misting or drenching the top of the plant because these plants absorb water through their roots. Tools like a spoon, straw, watering can, or mister can be used for this. Native to regions that receive a lot of water before going through a drought, succulents (think desserts). What does that imply then? It implies that they favor the soak-and-dry approach. After giving them a nice sip of water, wait until they are COMPLETELY dry before watering them once more. Water your succulents on average once every two to three weeks, and avoid letting their soil remain wet for more than a few days at a time.
Containers
In pots with adequate drainage, plants grow the best. Therefore, the best choice is to use pots with holes in the bottom. You can buy containers with holes already drilled into them or you can drill or poke holes yourself into your container. However, just because the majority of containers—especially the really adorable ones—don’t have drainage holes doesn’t mean you can’t use them. It DOES mean, however, that you should water your succulents properly, taking care to avoid soaking the soil for extended periods of time. See the How to Water section above.
Soil
Cactus soil that has been aerated is ideal for succulent growth. After watering, cactus soil tends to dry out quickly, protecting your succulent against root rot and too much water. Most plant nurseries and department shops with garden centers, such Lowe’s, Home Depot, and Walmart, carry this kind of soil. Your soil must be formed of substances like sand, moss, perlite, bark, and pumice and have a grittier texture.
Soggy or yellowed leaves
Typically, mushy, yellow leaves indicate that you have overwatered your succulent. Transferring your succulent to completely dry cactus soil is the best approach to preserve one that has been overwatered. After that, consider reducing the amount of water you give your succulent by only watering it with 1-2 tablespoons when the soil is fully dry. Depending on the habitat, this normally occurs every two to four weeks.
Rot
Your succulent may be rotting if you overwatered it or provided it with insufficient drainage. Without drainage, excess water will build up inside your container and cannot leave, rotting your succulent. Make sure your container has the right drainage holes by checking. If not, make holes in your container with a drill or a pin or transfer to a different container. See the information under “Containers” above if your container does not have a drainage hole.
Wilted Leaves
A plant that has underwatered will have wilted, rubbery leaves. Water your succulent with 1-2 tablespoons of water to start fixing this issue. After then, don’t water again until the earth is completely dry. If this occurs more quickly than 3–4 weeks, it might be time to increase your water intake. Over the coming weeks and months, test the watering frequency once more to determine the ideal amount for your succulent.
Stretching
Your succulent requires more light if you notice that it is getting taller and has wider spaces between its leaves. Although it can look fantastic that your succulent is expanding, succulents actually grow very slowly. Your succulent is enlarging as a result of its search for more light. If you experience this issue, relocate your succulent as soon as possible to a sunny window sill. Sadly, stretching cannot be undone. After that, your succulent will continue to grow and prosper, but its stem will still be stretched.
Scorching
The presence of dark patches on your succulent’s leaves indicates overexposure to sunshine and burnt foliage. These “burns” won’t go away, but as your succulent grows, it will ultimately slough off these leaves. Simply move your succulent to a less bright area to solve this problem.
