The next time a jade plant (Crassula ovata) leaf falls off inadvertently, don’t throw it in the compost bin. Alternatively, whenever you’re prepared, go ahead and trim a few leaves from your sedum (Sedum morganianum) burro’s tail. Hardy, simple-to-grow succulents have juicy stems and leaves that are great for starting new plants. This is how:
Use a sharp knife or pair of scissors to cut a leaf or leaves off a succulent. Get the leaf in its entirety, including the base. It might not root if a portion of the leaf remains affixed to the stem. Naturally, avoid removing too many leaves at once to avoid damaging the plant.
For a few days, let the leaves air dry. They will rot if you immediately plant them in soil because they will absorb too much moisture. When the chopped or pulled ends feel hardened or calloused over, the leaves are ready.
Dip the leaf tips in rooting hormone, if desired. While many other types of cuttings can be rooted using this technique, most gardeners don’t think it’s required for succulents.
Soil for succulents or cacti that drains smoothly should be placed in a tray or another container. Over the earth, arrange the leaves.
Propagating a Succulent
Put the chopped or plucked leaves on top of the easily draining cactus or succulent soil. until the baby plants appear, water sparingly.
For the next few weeks, unwind. The ends of the leaves will soon grow little roots. until you see young plants developing, water sparingly. After the babies emerge, wait a few days before watering the soil once again. Keep in mind that because succulents retain water in their tissues, plants don’t need much watering.
Till the mother leaf begins to wilt, let the plantlets develop. Now you have two options: either shift the leaves with the kids still attached into new pots or gently detach the babies from the original leaves and place them in separate pots. Eventually, the mother leaves will come off.
You can also produce additional plants from a succulent’s stem if it has become tall and lanky. Simply remove every leaf and manage them as previously mentioned.
Unless the soil is old and you need to replace it with new, nutrient-rich soil, avoid removing the stem from the soil. If so, fill a tidy container with cactus or succulent soil.
Trim the stem that is left to approximately one inch above the ground. Like you did with the leaves, let the cut end of this stub callous over and dry out.
Water just when necessary until you notice little plants emerging all around the stub. They ought to have developed their own tiny roots by the time they are big enough to handle. Separate them from the stub with care, then pot each one up separately.
How are succulents grown from cuttings?
When the light is not directly overhead, bring back outdoor plants to the garden. Create a shallow depression large enough for spreading roots by working the soil until it is crumbly.
Place your plant carefully inside of it, then add a layer of soil about an inch thick to gently cover the roots. To secure, lightly tamp. After a day, give the plant’s surrounding soil a gentle misting of water.
Cutting
With the cutting method, all you have to do is cut off a portion of a leaf or a stem, let it dry, and in no time at all, you’ll have roots and shoots. To keep it completely dry is the trick.
These are two approaches:
Beheading
A plant that has become tall and spindly or whose lanky, bare limbs hang downward like a pendant can benefit from this treatment.
Simply trim off the plant’s head, leaving approximately an inch of stem still attached. Dry it, let it to develop roots, then plant.
A healthy beheaded plant’s remaining stem should produce new leaves in a tight cluster, strengthening and improving the plant’s appearance.
As said, plant heads and leaves used as cuttings need to dry out and develop roots before planting.
It’s easy, really! This is how:
Can cuttings be used to propagate succulents?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- The cuttings will begin to take root in about a month, and then the tops of the cuttings will begin to grow.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
How do succulent plants grow new offspring?
Numerous kinds of cacti and succulents procreate asexually through offsets. These young plants, also known as offshoots or pups, are exactly what they sound like. They are teeny-tiny plants that appear at the base of an established succulent. Succulents like Aloe, Agave, and Mammillaria frequently reproduce in this way. Despite the fact that the majority of species create offsets underground, some succulents, including Kalanchoe daigremontiana, produce offsets on their leaves.
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
Is it possible to remove a piece of a succulent and replant it?
Because succulents are such hardy plants, you can actually plant a piece of one and it will develop into a new plant. It may sound like a horror film or the premise of an upcoming science fiction drama on Netflix, but it’s truly possible to regenerate something new from a severed limb. Even if one of its branches is cut off, they will still manage to survive.
Yes, you can prune or cut off a section of a succulent and plant it elsewhere. The clipped succulent piece will adapt to its new home and develop into a full-fledged succulent with the right growing circumstances.
If you want to learn more about pruning succulents, keep reading. It’s like getting numerous plants for the price of one if you get the technique down!
How are succulent babies created?
Succulents can also grow from solitary leaves. Succulent cultivars with fleshy, plump leaves that are simple to remove function well with this technique. Leaf propagation spares less of the “mother” plant and each leaf can create numerous little plants, even though it will take much longer to produce a full-sized plant. Getting a quality leaf cutting is crucial, much like with stem cuttings. Although they must split from the plant at the base of the stem, leaves can be wiggled off of a plant. Kremblas advises caution, saying, “Be sure to reach all the way down to where the leaf joins the stem, as a broken leaf will not propagate.” And make sure to select a leaf that is firm, plump, and limp-free.
Leaf cuttings should be allowed to callus and need partial sun to grow, just like stem cuttings. Leaf cuttings should be placed on top of a thin layer of succulent potting soil (not buried), and they should be misted with water to keep them wet. The leaf cuttings will start to grow little “pup” plants in about three weeks. The mother leaves will start to wilt and drop off after eight weeks, at which point your pups are ready to be planted.
Propagate succulent stems above water
Succulents can indeed be grown hydroponically, but you should use caution when doing so. Remove the lowest leaves from your mother plant by making a clean cut. After that, take a water jar and wrap it with plastic wrap. Make a few holes in it, and with the stem never actually touching the water, insert the exposed nodes about half an inch above the water. Whenever the water evaporates, top it off. Your roots should begin to expand in two to three weeks.
Propagate succulents on a wet paper towel
Leaving succulents on a paper towel is another approach to grow them. For a few days, let the ends of your succulent leaf cuttings dry out on a piece of paper towel on a tray. Spray water on the paper towel after a few days, then do it again after a few days. You should begin to notice roots and pups after a few weeks. Some gardeners will additionally cover the paper towel with a clear lid with holes or plastic wrap. You can eventually move your succulents into soil using both the jar and paper towel methods. Just remember that not all of your cuttings might grow successfully because the roots might be shocked by being transplanted into a different media.
Since succulents have so many fleshy leaves and may grow rapidly, you’ll always have room to experiment even if not all of your plants produce roots and pups. You’ll be able to share your succulents sooner than you think if you use leaf cuttings, new cactus soil, bright indirect light, and sporadic spritzes of water.
What is the time required to grow succulents from leaves?
- Leaf propagation: Typically, it takes 2 weeks for roots to develop through leaf propagation. New leaves will start to form in around 8 weeks and can optionally be transplanted to a tiny container.
- Root formation typically takes 4 weeks, but it can occasionally take longer with stem proliferation.
- Offset propagation: Once the pups have developed a calloused skin, the roots typically begin to grow after 4 to 10 weeks.
- The process of propagating seeds takes the longest—cactus seeds can take anything from three weeks to a year to even begin to germinate. After that, the seedling takes a very long period to mature into a full-grown adult.
How do I handle succulent offshoots?
It’s crucial to understand that young plants won’t be harmed or affected by them, particularly those that develop near the mother plant’s base.
Although the offsets may appear cramped or unpleasant, they are precisely where they should be.
Have faith in Mother Nature’s processes. They have been engaged in this activity for a lot longer than we have.
Be Patient
I advise delaying their removal until the offsets are roughly half the size of the main plant. This guarantees that your infants receive the right nutrition and have the best chance of surviving on their own.
What’s Next?
Once your succulents begin to produce offsets, you might want to repot them in a little bigger container to provide room for the hen and the baby chicks.
With a pair of pruners, you can remove the offsets once they have grown to half the size of the mother plant.
Watch for the wound to callus. Put them in a shady, light area on top of fresh soil, don’t water them, and ignore them.
They will eventually take root in the ground, and then presto! You were successful in creating one to eight new playable plants.