There aren’t many ways to repot a cactus without getting pricked and hurt. Wearing nitrile coated gloves (may be two pairs or double coated) and utilizing folded newspaper may be sufficient to handle small to medium sized cactus.
Utilizing silicone tongs is an additional technique for handling little cactus (not metal ones). Be very cautious with your cactus and avoid pinching it. Use foam sponges or anything comparable as well.
You must be careful not to harm the roots that are wrapped around the main root ball. Try to remove a cactus from its pot by turning the pot vertically. If you wait three to five days before repotting your cactus, it should be simple to perform.
Use this technique if your cactus isn’t coming out on its own. The top soil layer should be removed with a thin wooden stick or something similar. Then, while holding the cactus and using folded newspaper for particularly spiky cacti, gently tap the pot against the table to see if you can slide it out of the pot. By pulling your cactus in this way, you risk damaging its incredibly thin and delicate roots.
How to handle and repot a large or tall cactus with sharp spines
You must exercise extra caution if your cactus is large and tall, grows outdoors, or both. When moving your cactus, put on your nitrile-coated gloves and use some folded newspaper. Additionally, you could wrap your cactus in a large towel.
If you’re having trouble getting your cactus out of the pot, try using a wooden stick to push the rootball out of the drainage holes.
You can smash the pot or chop the cactus if nothing else works to get it out. If your cactus still won’t emerge after you cut the pot, you can use a hose to spray water on the roots of the plant. This will soften a rootball. You don’t want to hurt your plant, so always be kind. Remember that you must wait for the roots to dry after spraying them before potting them into a new container.
To ensure that the roots of your cactus dry out, hang it. Put something underneath the huge cactus to provide support (for example some bars under the cactus so it is hanging). Additionally, hanging it outside the pot will help the roots dry out more quickly.
Before planting the cactus, you must dry the roots if you used a hose to shower them.
After you have removed your cactus from an old pot
You must clean the rootball and get rid of old soil after taking the cactus out of its old container. Dry soil should make this task simple. However, if the soil has dried and you are unable to clean it, put the rootball in a plastic container and soak it for 20 to 40 minutes in warm water (about 122 degrees F or 50 Celsius).
Wash the rootball with water to remove any remaining soil after it has softened. Dry the rootballs of your cactus for 12 to 30 hours to ensure full drying.
A helpful suggestion would be to hang your cactus so that the roots are upright. This will hasten the cacti’s transition to a new pot and preserve the roots’ healthy natural shapes. The rootballs of your cacti will sprout more plants if you wash and soak them in warm water.
Take a look at cacti’s roots
Examine the roots after removing your cactus and removing any remaining soil by shaking (or washing) it off. You must inspect the roots to look for rotting and parasites. You must use micro-tipped pruning shears to remove any visible rotting roots.
Another option is to use tiny scissors. However, be sure to sanitize the blades with alcohol, a flame, or boiling water and antibacterial soap before cutting any bad roots.
Wash off the dirt and dab some alcohol on cuts if you notice any damage or cuts in the roots. Before putting the cactus in the pot, let the roots dry.
Place the cactus in its new pot
Place your cactus in the pot after looking at the roots. It ought to already be partially filled with gravel or rocks, charcoal, and dirt on top. Insert your cactus, then begin slowly filling in the sides with soil.
While adding the soil and once you are finished, pat the earth lightly without using any instruments. Be sure to leave the top layer’s soil free by 1-2 inches. Your cacti may be more susceptible to root rot if the dirt is overfilled in the pot.
You can water your cactus after about 5-7 days. Add extra soil on top if it has greatly drained. Two to three weeks after repotting, a good cactus should become sturdy and feel at ease in the soil. Your cactus’ roots are unhealthy if it is unsteady and need additional support.
What to do after you have repotted your cacti
You must give your cactus a 7–10 day period of relaxation after repotting. When your cactus are resting, avoid watering them. Additionally, throughout these 7 to 10 days, you need to stop any water from the cacti’s stem from evaporating. The stem will dry out if you don’t do this, which is really crucial.
Take your cactus to a cool, dark location, and cover it with a white transparent plastic veggie bag to make sure water is not evaporating from the stem. Spray your cactus with little warm water after 4-5 days and cover it again if the room becomes too hot. Take the cactus out and plant them in their permanent location after 7–10 days have passed. Additionally, after repotting, water them for the first time.
During the first month or two, you may notice additional growth and possibly even flowering if the repotting was successful.
Please share and read more about caring for cactus if you liked this article!
What safeguards should I use when repotting a cactus?
When dealing with cacti, I’ve always attempted to wear gloves, but the leather ones I had didn’t seem to make much of a difference. Despite the little obstruction, I frequently ended up with spines in my fingertips. Someone informed me that since leather is made of animal skin, cactus spines will adhere to it similarly to how they would to my own skin. It was entirely reasonable! The cactus spikes will still cut through the leather despite some protection provided by it.
I learned about nitrile-coated gloves at that time. These gloves have a nitrile covering on the fingers and are made of fabric. When it comes to protecting your skin from prickly cacti, nitrile is a synthetic substance that performs far better than leather. Long spines can, of course, still penetrate nitrile, but the annoying little hair-like spines have a lot harder time doing so than leather does.
These days, I almost always layer the gloves as well—two on each hand. I only use them while I’m dealing with cacti and store them separately from my other gloves. It’s one of my best ideas ever, for real.
How should a cactus be replanted?
When you’ve decided whether to repot your cactus, it’s time to grab your equipment and exchange the old soil or container with the new one. Fresh soil is an excellent idea even though every cactus doesn’t require a new container. Only plants that are pot-bound require a larger pot.
Gently tong, glove, or wrap the plant out of its pot. If the soil is dry, they normally come out easily, but you might need to use a trowel to remove the soil around the edges. Plant the cactus at the same depth it was growing in the old soil after shaking off the old soil. Put it in a bright southeast or east window, filling in the area around the roots with your medium.
Not watering the plant right away while it is accustomed to being handled and new soil conditions is one of the most crucial repotting cactus advices. A few weeks later, you can water the plant, let it dry up, and then water it once more.
Can I touch the cactus?
Cactus spines are modified leaves that resemble needles. Cactus may lose less water in hot and arid environments because of its needle-like adaptability. Additionally, they give out some shade and are a fantastic deterrent to animals that might try to eat them.
Some cactus feature camouflage-producing spines, which further helps to defend them from predators who could try to consume them. Less light reaches the stem of the plant because the cactus spines reflect light (reducing water loss).
What types of cactus spines are there?
Various cactus plants may have one of a few different types of cactus spines. Some spine types could be more difficult to remove and hurt more when pricked. Types of cactus spines include:
- tiny, hair-like spines (such as in genus of Cephalocereus)
- Stiffened spines (such as in Mammillaria gracilis)
- rounded spines (such as in Sclerocactus papyracanthus)
- Glochids (such as in Opuntia rufida)
- bent spines (most cacti)
One of the sorts of cactus spines that causes the most discomfort is the glochid. This is due to the glochids’ brittleness and easy skin-breaking. This makes removing them from the skin extremely difficult.
This also applies to cholla or barbed spines. They are extremely painful and easily penetrate skin and soft tissues. These cacti belong to the Opuntioideae subfamily, which also includes Chollas and Cylindropuntia.
Because they adhere to flesh, clothing, and fur with ease, cholla cacti are sometimes known as jumping chollas. They must be carefully removed from the skin since if done by hand, they would cling to the fingers.
When should a little cactus be repotted?
Repotting a cactus is essential for the same reason you should do it for the rest of your indoor plants: it offers them room to expand and improve their health while replenishing the soil’s nutrients. Repotting a cactus typically takes place every two to four years for mature plants and sometimes every year or two for plants that are still growing.
How to tell when a cactus is ready for repotting
The active growing season is the ideal time to repot your cactus because that is when it is healthiest. When the roots of your cactus begin to protrude through the drainage hole at the bottom, you’ll know it’s time for a new home (drainage holes are especially important here). The two to four year period is only an estimate because there are many variables, including how much and how frequently you fertilize, how old the cactus is, and whether it is a fast- or slow-growing variety. For instance, additional fertilizing extends the soil’s ability to hold onto nutrients for closer to four years, but if the cactus develops quickly, you might need to repot it sooner. It’s critical to examine all factors while deciding how to repot a cactus.
Do cacti prefer little pots?
Your cactus or succulent plant’s survival depends on the pot size and soil type you choose.
In this section, you will learn how to pot or repot your plant, how to knock out a plant, and how to manage prickly plants, as well as everything else you need to know about properly caring for your cactus or succulent plant.
When they’re young, succulents and cacti can be kept in a dish garden. For a start, the common clay bonsai trays are excellent.
The plants can be moved into their own pots when they become too large. No matter the temperature—45°F or 85°F—the plants will remain the same size if you keep them dry. The plants will rot if you water them in cold weather or when they are dormant.
Avoid overpoting. Rotting roots are frequently caused by overpotting. Put the smaller pot into the larger pot and fill the area in between with gravel if the plant is top heavy. This will provide the plant with a sturdy foundation without putting it at risk of decay.
Pot Size
Cacti and other succulents should be potted in the smallest containers possible. Use a pot for cactus that is just big enough to accommodate the plant. Use a pot that is just a little bit bigger than the root ball for other succulents.
The drainage provided by the holes on the pot’s bottom is insufficient for some plants. Make the hole in a clay pot bigger by using a hammer and a screwdriver. For a plastic pot, use a hot knife or hot ice pick.
In either scenario, take care to avoid burning yourself or breaking the pot. If the clay pot does crack, save the fragments for your subsequent planting endeavor rather than throwing them away.
Soil
The potting material is less significant than excellent drainage. A thick layer of gravel or crumbled bricks should be put over the porous soil. More humus (organic matter) is preferred by spineless succulents in their potting soil.
We typically use the terms “heavy,” “organic,” and “light” to describe different types of soil. These definitions mean as follows:
Heavy. This is composed of clay, loam, or good garden soil with roughly one-third humus. It should contain roughly one-third washed builder’s sand or perlite where good drainage is necessary.
Organic. This is humus-rich soil, leaf mold (decomposed leaves), or some other organic material-rich soil. The drainage will be improved by using perlite or coarse builder’s sand.
Light. This describes a material with an open texture that has great drainage and can be kept damp but never wet. Plants that spend time in trees in the natural world benefit from it.
How to Pot
1. Choose a pot that is not excessively huge.
2. Fill the bottom with enough drainage material.
3. Insert your potting material into it until it is roughly one-third filled.
4. Check the plant’s size (make sure it won’t be too high above the pot’s top or too far down in the pot). Unless the plant prefers to move horizontally, in which case it should be placed at one edge, place the plant in the middle.
5. Fill all the crevices between the plant and the pot with your potting medium while holding the plant gently where you want it to stay.
6. Shake the pot to help the soil settle, then gently press the earth down around the roots. Add extra soil if there isn’t enough or if it starts to pack down. Older plants get more earth packed around them than seedlings do. So that there is room for water, leave a space between the top of the medium and the top of the pot.
7. Give the plant water.
Repotting
The process is essentially the same when working with plants that are already potted, with the exception that you must start by taking the plant out of pot 1.
Sometimes the plant can be readily removed, but other times it can be more difficult. Do not pull on the plant if it is stubbornly refusing to emerge from the pot. The container breaking can be preferable to the plant being damaged or having its top broken off.
How to Knock Out a Plant
If the plant is stuck in its pot, try gently tapping the pot against something hard, like wood or concrete, to see if you can squirm it out.
If it doesn’t work, try carefully slicing the inside of the pot with a knife to see if the plant will now emerge.
If that doesn’t work and the pot is made of clay, use your hammer to smash it with a few controlled strokes that won’t harm the plant.
Take part of the soil around the root ball out once the plant has been removed from the pot. Prune away a portion of the roots if they appear to be overgrown.
You can take a knife and simply chop off the outside of the root ball, including the roots, on some plants where the roots become extremely, extremely thick. If you wish to retain your plant in the same-sized container, you can also utilize this root pruning technique.
You can keep your plant “growing on” in the same container for years by first cutting some of the roots and then portion of the top.
How to Handle Spiny Plants
Handle prickly plants by wrapping them in a narrow band of newspaper. Using the band like a belt or harness, wrap it around the plant. For each plant, use a new band.
Gloves are uncomfortable to handle because the small spines break off inside the glove and the huge spines stab right through the glove.
Actually rather simple to propagate are cacti and other succulents. Learn everything you need to know about successful plant propagation in the section that follows.