Cuttings can be grown in a temporary pot while they develop roots, or you can just plant them in a permanent container. In either case, you’ll need a pot with a drainage hole that’s big enough to give each cutting 2 to 3 inches of space.
To shield your succulents from standing water and root rot, fill the container with a grittier, well-draining soil. Cactus/succulent potting soil is typically available at garden centers. Alternatively, you can create your own by mixing 3 parts potting soil with 2 parts coarse, salt-free sand and 1 part perlite or pumice.
Plant the Cuttings
Insert the cut end of a stem 1 to 2 inches into the ground. If the succulent has leaves, you might need to remove a few of them to reveal the stem’s base. The lowest leaves shouldn’t contact the soil; they should rest just above it. To help the cutting stand straight, softly compact the dirt around it.
Remove any necessary leaves from stemmed succulents to expose 1 to 2 inches of stem for planting.
Pick the Right Location
Choose an area with enough of airflow, bright indirect light (not direct outdoor sun), and succulents that are still young. Cuttings require sunshine to develop new roots, but direct sunlight might cause them to quickly dry up. On indoor succulents, good airflow helps avoid gnat and mealy insect infestations.
Water
Cuttings require constant hydration until they can form roots, unlike mature succulents. Water the soil just enough to prevent it from drying up, but not too much that there is standing water. Actual frequency varies depending on humidity and temperature but is often 2-4 times each week.
Care for Rooted Succulents
A very slight pull will reveal whether a cutting has roots after 4-6 weeks. Change to deeper, less frequent watering for succulents with roots. Water just once the soil is completely dry, which takes about 2-4 times each month. If necessary, repot the succulent and relocate it gradually to the right lighting. Don’t increase light exposure for 1-2 weeks to give the plant time to adjust. Maintain your succulent’s care, and in the upcoming months, keep an eye out for above-ground development.
What happens if my succulent is rootless?
Do not become alarmed if you notice little roots emerging from your succulent’s stems. It is evidence that your plant is flourishing. In addition, these little roots are known as aerial roots. However, bear in mind that you will need to treat aerial roots differently if you notice them emerging from your green.
If you’re wondering why the aerial roots grow, keep in mind that a poor light environment and a high humidity level may be to blame. However, if your succulents start to spread out or become leggy after developing aerial roots, your plants aren’t getting enough light.
Gather Your Succulents To Plant
For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.
Prepare your succulents for planting.
The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.
After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.
Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.
Mix your soil.
If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.
To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.
Plant!
We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.
Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.
Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.
Admire and Show Off Your Work!
Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
What about propagating leaf cuttings?
Some soft succulents will re-root from leaves, though it is typically more difficult. Pick thick, healthy leaves that are close to the base. Take off the leaves and allow them to dry for 4 to 7 days inside or in the shade. once the calloused cut cease,
Plant the leaves cut side down, vertically, in a bed of loose soil. Watch for new growth over the next months and water as you would a stem cutting.
Can I plant cuttings outdoors?
Because of the more unpredictable climatic circumstances, repotting cuttings outside is difficult. You can try planting a clipping of a succulent outside during the growing season if you live in the appropriate hardiness zone. Choose a spot that gets some sun, either direct or indirect. Observe the aforementioned recommendations and pay close attention to moisture levels. Be mindful that not all cuttings will thrive.
Do I need to fertilize?
There is no need for fertilizer, and using too much will harm young or unrooted succulents. In the spring growing season, mature, rooted succulents may withstand low-nitrogen, slow-release fertilizer.
How long does it take a cutting of a succulent to take root?
Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
How may succulents be replanted without getting them sick?
Select a container that is roughly 10% larger than your succulent. Avoid choosing a pot that is too large as it can startle them. Additionally, because they hold more water, your succulents may become overwatered if they remain wet for an extended period of time.
This step is not required. There is no need to cover the holes with such materials if the pot is very porous and has good drainage holes that still permit water to travel through them.
In the bottom of your new pot, add one to two inches of dirt and lightly compact it around the drainage hole.
By doing this, you should avoid damaging your succulent when you repot it.
- You can: cultivate your succulents in plastic containers;
- Tap the bottom of the pot, then gradually slide it out: Holding your new plant firmly by the stems or leaves, turn it sideways, and tap the grow pot’s base until the plant slides out. To help your succulent escape the pot, you might also give it a little tug.
- If you don’t need the plastic pot any more and prefer to avoid having to handle the plant too much, you may also cut the pot out using a flush cutter.
- If your succulent is grown in clay or another material:
- Take each stem out one at a time.
- To avoid touching the tendrils too much while repotting the plant, wrap a cloth around it and carefully ease it out.
Before planting, use your fingers to gently loosen the roots. If the roots on your succulent are particularly thick, you can trim about an inch from the root ball and use a clean, sharp knife to cut through the knotted roots. By doing this, the dirt in the bigger pot should begin to fill with fresh root growth. Just leave it alone if the root system is modest.
Remove at least a third of the old potting soil that is surrounding the plant. As they have likely ingested a significant portion of the nutrients in the old potting mix, this should enable your succulent to receive all the nutrients it requires.
Ensure that your succulent is erect and centered in the arrangement. After that, use the new soil mixture to fill in around the rootball and gently press it down so the rootball is surrounded.
After you’ve finished repotting your succulent, give it at least a week to become used to its new surroundings before giving it a nice soak in water. Your succulents should experience less shock as a result of this.
Succulents can be repotted into bigger containers to promote new development, which will help them stay healthy and get bigger. Nevertheless, certain plants don’t like to be transplanted, so exercise caution and make sure you’re doing it at the right time.