When a plant produces pups or offspring, it is essentially replicating itself. Succulents don’t always produce pups and offspring, but those that do essentially grow in numbers on their own. Among the numerous additional species that give birth to pups or offspring are hens and chicks, aloe, specific haworthia species, and cacti.
The pups and offshoots can be carefully removed, put in a suitable potting mix, and used to begin a new plant. By redirecting energy to the growth of the mother plant instead of supporting her pups, removing offshoots from the mother plant promotes its health.
Step 1
Look for plants that have pups or offspring. The young that develop from the mother plant are called pups and offshoots. Not every succulent plant gives birth to pups or offspring. Aloe, certain haworthia and cactus species, as well as many succulent species, do.
Step 2
Clean your knife. Make use of a clean, disinfected, sharp knife. Washing with warm, soapy water or wiping with rubbing alcohol will do this. To prevent spreading fungus or infections, be sure to clean the knife after each cutting by wiping it with alcohol.
Step 3
Locate pups or offspring that need to be removed. An offshoot or pup can be separated from the mother plant once it has reached a suitable size or begun to establish roots. When removing the pup, try to grab some roots. A pup without roots can be removed, but ones with roots that are already there will work much better. Without roots, pups or offshoots will ultimately establish roots on their own, but pups and offshoots with established roots stand a better chance of surviving on their own.
Step 4
Eliminate the branch. To gently remove the pup or branch from the mother plant, use a clean knife. Some pups or offspring are simpler to get rid of than others. The pup can occasionally be gently twisted off to separate them.
Sometimes you need to remove the pup using a sharp tool. By sliding the knife blade between the mother plant and the offshoot, carefully detach the baby plant from its mother plant. Sever the root that connects the pup to the parent plant before carefully pulling the two apart.
Insert the knife blade into the soil between the mother plant and the offshoot if you want to remove the pup while it’s still in the ground. To cut the connecting roots, slide the blade through the dirt. Then, using the sharp end of a small shovel, dig a few inches along the radial parameter after creating a 2-inch radius in the dirt around the base of the branch. By angling the spade underneath the offshoot, you can delicately pry it out of the ground to remove it.
Step 5
Set the pup down. The pup can be planted on its own after being removed. Prepare an appropriate, well-draining potting mixture, then add some of it to a tiny container. Put the pup or offspring in the ground. As soon as the plant is secure, lightly pack the earth around it.
Step 6
occasionally use water. More moisture is required by pups and offspring than by mature plants. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Step 7
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
How are succulent offshoots planted?
It’s crucial to understand that young plants won’t be harmed or affected by them, particularly those that develop near the mother plant’s base.
Although the offsets may appear cramped or uncomfortable, they are precisely where they should be.
Have faith in Mother Nature’s processes. They have been engaged in this activity for a lot longer than we have.
Be Patient
I advise delaying their removal until the offsets are roughly half the size of the main plant. This guarantees that your infants receive the right nutrition and have the best chance of surviving on their own.
What’s Next?
Once your succulents begin to produce offsets, you might want to repot them in a little bigger container to provide room for the hen and the baby chicks.
With a pair of pruners, you can remove the offsets once they have grown to half the size of the mother plant.
Watch for the wound to callus. Put them in a shady, light area on top of fresh soil, don’t water them, and ignore them.
They will eventually take root in the ground, and then presto! You were successful in creating one to eight new playable plants.
Can you grow puppies of succulents?
The newborn can be planted in the ground once the dried end has healed over. In order to help babies and cuttings stay moist a little bit longer than they would on the standard gritty mix that I recommend for succulents, I advise putting them in a layer of coconut coir.
Your puppy has to be in a pot that isn’t too big but still allows for growth. Usually, one centimeter (0.5″) of space is sufficient around the edge of its leaves. Anything that gives more than 1 inch (2.5 cm) on either side should be avoided when planting it.
So if your puppy has a diameter of about 1″, put it in a pot with a 2-3″ diameter.
Put the cutting in a spot that receives plenty of bright, indirect light. The baby may experience stress from the sun and burn or quickly dry out. If you’re growing indoors, place it near a window with plenty of light or place it under grow lights for a few hours every day.
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base as you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. Over time, the cutting will produce roots that stretch toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be careful to avoid harming any roots that have already developed. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
Can you transplant a succulent stem after cutting it off?
I make a lot of movies and posts about succulents because I have a lot of them in my yard. They are perennial gifts, so to speak. You can simply cut them to acquire more.
Because the vast majority of succulents spread in the same manner, I wanted to write one post that you could refer to whenever I write about a particular succulent. These are the two incredibly simple methods.
Let me demonstrate how to grow succulents:
I usually divide succulents using stem cuttings. Ensure the sharpness and cleanliness of your pruners. Simply trim the stems to the desired length, remove the bottom third of the leaves, and then wait 2 weeks to 4 months before planting them to heal off (the cut end of the stem will callus over).
I either plant them straight in the ground or in a pot with planting mix for succulents and cacti. I use one that is made nearby; it’s also good. Succulents require a loose mixture so that the water can drain completely and prevent rot.
I rarely use individual leaf cuttings to propagate succulents, but it’s still simple. Lay the leaf on top of the mixture after removing it from the stem, making sure to remove the entire leaf all the way to the stem. Off the cut end, there will be a new plantlet.
I suppose I could propagate succulents in my sleep because I do it so frequently! Although many succulents make excellent houseplants, mine all grow outside. If you have just one or two of these bizarre plants, you can easily grow more using these simple methods.
Aloe Vera must be multiplied by division, which involves removing the pups from the mother plant.
What do I do with babies of succulents?
If you’re unsure of what to do with succulent puppies, you have options. If there is enough room, you can either leave them where they are and let them continue to grow there, or you can separate them and transplant them separately. However, wait until they are the size of a quarter before removing.
Pups should be removed with a precise cut using clean, sharp pruners or scissors. Normally, I would advise using a soft touch, but after seeing films from the professionals, I don’t think that is necessary—just another example of how resilient succulent plants may be.
How long does a succulent take to develop from a pup?
Succulents can also grow from solitary leaves. Succulent cultivars with fleshy, plump leaves that are simple to remove function well with this technique. Leaf propagation spares less of the “mother” plant and each leaf can create numerous little plants, even though it will take much longer to produce a full-sized plant. Getting a quality leaf cutting is crucial, just like with stem cuttings. Although they must separate from the plant at the base of the stem, leaves can be wiggled off of a plant. Kremblas advises caution, saying, “Be sure to get all the way down to where the leaf meets the stem, as a broken leaf will not propagate.” And make sure to select a leaf that is firm, plump, and limp-free.
Leaf cuttings should be allowed to callus and need partial sun to grow, just like stem cuttings. Leaf cuttings should be placed on top of a thin layer of succulent potting soil (not buried), and they should be misted with water to keep them wet. The leaf cuttings will start to grow little “pup” plants in about three weeks. The mother leaves will start to wilt and drop off after eight weeks, at which point your pups are ready to be planted.
Prepare the Pot
Cuttings can be grown in a temporary pot while they develop roots, or you can just plant them in a permanent container. In either case, you’ll need a pot with a drainage hole that’s big enough to give each cutting 2 to 3 inches of space.
To shield your succulents from standing water and root rot, fill the container with a grittier, well-draining soil. Cactus/succulent potting soil is typically available at garden centers. Alternatively, you can create your own by mixing 3 parts potting soil with 2 parts coarse, salt-free sand and 1 part perlite or pumice.
Plant the Cuttings
Insert the cut end of a stem 1 to 2 inches into the ground. If the succulent has leaves, you might need to remove a few of them to reveal the stem’s base. The lowest leaves shouldn’t contact the soil; they should rest just above it. To help the cutting stand straight, softly compact the dirt around it.
Remove any necessary leaves from stemmed succulents to expose 1 to 2 inches of stem for planting.
Pick the Right Location
Choose an area with enough of airflow, bright indirect light (not direct outdoor sun), and succulents that are still young. Cuttings require sunshine to develop new roots, but direct sunlight might cause them to quickly dry up. On indoor succulents, good airflow helps avoid gnat and mealy insect infestations.
Water
Cuttings require constant hydration until they can form roots, unlike mature succulents. Water the soil just enough to prevent it from drying up, but not too much that there is standing water. Actual frequency varies depending on humidity and temperature but is often 2-4 times each week.
Care for Rooted Succulents
A very slight pull will reveal whether a cutting has roots after 4-6 weeks. Change to deeper, less frequent watering for succulents with roots. Water just once the soil is completely dry, which takes about 2-4 times each month. If necessary, repot the succulent and relocate it gradually to the right lighting. Don’t increase light exposure for 1-2 weeks to give the plant time to adjust. Maintain your succulent’s care, and in the upcoming months, keep an eye out for above-ground development.