Learn how to propagate your Topsy Turvy Echeveria if you want to increase its population. This succulent may be reproduced in a number of ways, including by cuttings, seeds, and offsets. Here are some instructions for growing your Topsy Turvy Echeveria.
Through Offsets
Since this succulent produces several chicks or pups, its offset is the simplest way to multiply your Topsy Turvy Echeveria. Typically, the pups develop at the mother plant’s base.
The larger pup should be chosen when propagating through puppies since it has a better chance of surviving after it is planted in a new pot. To cut the pup from the mother plant and insert the knife between the mother plant and the baby plant, you will need a clean, sharp knife. After that, gently cut through or peel it away. After being sliced, allow the pup to recover for a few days and develop calluses before planting it in the new pot.
Planting the infant Topsy Echeveria in soil that drains well and placing it in a location where it will get enough sunlight are additional crucial components to a successful proliferation through offsets. It would also be beneficial to use rooting hormone, as this will give the new plant a boost of nutrients and lessen its shock at being separated from the parent plant.
Through Leaves Cuttings
Pick healthy leaves from the main plant, ideally from the bottom of your succulent, to remove in order to propagate your Topsy Turvy through its leaves. You can remove the leaves away from the main plant using a sharp knife or a pair of scissors. It’s also feasible to pull it off with your hand. To do this, grip the leaf firmly between your thumb and forefinger and rotate it side to side until you hear a small snap. Make sure to grab all of it. Please remove all leaf tissue off the stem, especially the meristem tissue, as this will increase the likelihood that the leaf will survive once it is placed on its new container.
After that, you must wait for the leaf to dry out entirely and develop a callus before planting it in a well-draining soil and keeping it out of direct sunlight. For this, you don’t need a watering schedule; nevertheless, before watering again, make sure the ground is completely dry because too much water could harm the plant.
Crazy as a top Echeveria has a leaf on the flower stem, but you can’t utilize it because only the leaves from the mother plant may bear offspring.
Through Head Cuttings
Cutting the head of your Topsy Turvy is another method of propagation, particularly if the rosettes are mature and have expanded. Sharpen your knife and carefully trim the thick rosette from the top of your Topsy Turvy Echeveria. After letting the cuttings dry for a day or two, plant them in well-draining soil. It won’t decay if you let it air dry before planting.
When the soil is dry, water it, and place it where it will receive full to partial morning sunlight and afternoon shade from the sun’s harsh rays. They are delicate to heat and water, so take particular care with it. When it reaches maturity, it will consume more water and light.
Through Seeds
Topsy Turvy Echeveria can also be reproduced by seeds. However, if you still decide to reproduce using this approach, you must obtain a high-quality seed and exercise caution when buying phony seeds, which are frequently marketed online.
The succulent Topsy Turvy Echeveria is not difficult to grow. It is well-known among plant collectors because of its stunning features.
Topsy Turvy Echeveria is a great addition to your collection if you have a succulent terrarium in your home or place of business. It stands out among other succulents thanks to its distinctive leaves. Anyone who visits your garden would be captivated by this award-winning succulent.
How To Propagate ‘Topsy Turvy’ By Leaf Cuttings
Remove a leaf from the plant and place it in a spot with bright indirect light to reproduce “Topsy Turvy” that way.
Lay the leaf on top of damp potting soil in a container and let it callus for a few days.
The leaf can be put in a container with well-draining potting soil once it has roots in the ground.
How To Propagate ‘Topsy Turvy’ By Offsets
Offsets grow along the stem bases of Topsy Turvy plants. Growing from the mother plant are these little Echeveria plants.
Pull the little rosette gently away from the mother rosette to propagate “Topsy Turvy” by offsets.
Place the rosette in a container filled with potting soil that drains well, and water it regularly until new growth starts to form.
The offsets can be transferred into individual containers when they are 1/2 to 3/4 inch tall.
How frequently should I water my succulent Topsy Turvy?
The Royal Horticultural Society’s esteemed Award of Garden Merit was given to this plant. The rosettes can reach heights and widths of 8 to 12 inches. In sandy or well-drained soil, plant these. Even though the plant can tolerate drought, you can water it sometimes as long as you let it dry out entirely before doing so. Additionally, avoid watering plants when they are dormant.
These need at least five hours of direct sunshine each day, or partial to full sunlight. These can be grown indoors in the winter as long as the plants receive enough light. The plants produce offset growth in the spring. Those tiny rosettes can be divided to produce new plants. indigenous to Mexico.
Can you remove a piece of a succulent and plant it again?
Because succulents are such hardy plants, you can actually plant a piece of one and it will develop into a new plant. It may sound like a horror film or the premise of an upcoming science fiction drama on Netflix, but it’s truly possible to regenerate something new from a severed limb. Even if one of its branches is cut off, they will still manage to survive.
Yes, you can prune or cut off a section of a succulent and plant it elsewhere. The clipped succulent piece will adapt to its new home and develop into a full-fledged succulent with the right growing circumstances.
If you want to learn more about pruning succulents, keep reading. It’s like getting numerous plants for the price of one if you get the technique down!
Can you put succulent cuttings directly into the ground?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- The cuttings will begin to take root in about a month, and then the tops of the cuttings will begin to grow.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
Growing Echeveria Topsy Turvy Indoors
This is probably one of the main causes of Topsy Turvy’s death. Being a sun-loving plant that requires a good daily dose of direct sunlight (4+ hours followed by bright light) to grow compact and attractive, this succulent is particularly difficult to maintain indoors. The Topsy Turvy and the majority of succulents will suffer indoors due to the lack of light, the humidity, and insufficient fresh air.
Only a few circumstances allow Echeveria Topsy Turvy to be produced indoors. Either a bright sunroom, a huge sunny window in an extremely bright room, or high-quality plant growing lights are required. If not, the plant is likely to stretch out and become lanky before dying after a month or two.
It is advisable to keep Echeveria Topsy Turvy outside in some sunlight. Since Topsy Turvy is not cold tolerant and needs a place to spend the winter, it may be challenging to maintain it outside in winter in regions with frequent frosts or snowfall.
The sunniest window should be picked, and it should only be left in during frosts, if you want to overwinter Topsy Turvy indoors. This succulent can withstand temperatures higher than 1C/33.8F. It might also be aided by purchasing plant growing lights.
When Echeveria Topsy Turvy begins to decline indoors, it should still be feasible to bring it back to life by gradually exposing it to sunlight. The plant could get shock and burns if it is overly shaded for an extended period of time (much like people would get sunburned in the sun after winter).
The plant can be positioned in an area that receives a few hours of early sun followed by brilliant shade because morning sun is relatively gentle. The plant will eventually be able to tolerate increasing amounts of sun. The top of Topsy Turvy may need to be trimmed off and placed back in the sun in a new pot if it has grown too long and looks lanky or tall.
In about a month, roots will sprout, and the growth will self-correct. The good news is that fresh offsets will grow when the top portion of the rosette is removed (at the stalk’s root end), giving you access to extra plants.
Too Much Sun Exposure During Severe Heatwaves
Despite being a sun-loving succulent, the leaf of Echeveria Topsy Turvy can become burned on exceptionally hot days. This succulent should be fine exposed to the sun in most situations, however heatwaves with temperatures over 35C (95F) may cause the leaves to wilt. A plant will heat up to much more than 35C if it is in a black pot. The plant may be killed and cooked alive as a result.
At our nursery west of Sydney, Australia, summertime highs frequently exceed 40C (104F), at which point most plants (and other living things) suffer from exposure to direct sunlight. Since weather forecasts show what the temperature will be like in the shade rather than in the full sun, direct sun is frequently much hotter than predicted temperatures.
We occasionally even reach 45C (113F), which makes it very difficult to spend extended periods of time outside. But our plants always survive the summer with the assistance of a shade cloth (30%). Echeveria Topsy Turvy has survived our challenging summers time and time again. Moving plants to a sheltered area (under a tree or covered verandah) for the length of the heatwave will work if you don’t have a shade cloth.
Not Enough Water
Although it may go against what most people would assume, we have found that Echeveria Topsy Turvy does not appear to mind water and thrives more when watered frequently. Of course, this does not apply if the plant is kept indoors throughout the winter because the water does not evaporate as quickly as it would outside.
Additionally, we have never observed Topsy Turvy rot from being overwatered or exposed to the elements. When it rains, we leave the nursery’s Topsy Turvy plants all out in the open.
When Topsy Turvy isn’t given enough water, especially during a hot, dry summer, it begins to lose its bottom leaves. Even though it takes a lot of work, droughts and heat waves can entirely kill this succulent if it is not given adequate water.
Give your Echeveria Topsy Turvy a good old drink if you see the bottom leaves progressively drying up and becoming crispy. Even plants that have suffered severe water loss can still be rescued.
Root-bound Plants
When roots extend all the way to the bottom of a pot and begin to grow tightly, it nearly seems as though the entire potting mix has vanished and been replaced by roots, which is when a plant is said to be root-bound.
While many succulents are intentionally grown in this way to become more colorful and hefty, they require a little extra care to keep their aesthetic appeal. Some plants are also more resilient than others.
The lower leaves of Echeveria Topsy Turvy will begin to wilt and die off when it is rootbound. The remaining rosette will constrict and develop thick leaves. The plant may entirely dry out and die if it is subjected to harsh conditions, such as a hot sun, and is not given regular watering.
The Topsy Turvy has the ability to reach a diameter of around 20 cm, and in a large enough pot, it will also generate a large number of offsets and flowers during the flowering seasons. Rootbound plants typically conserve energy by developing few offsets and by expanding slowly.
We advise not letting this particular succulent become root-bound during the hot and dry months and changing the pot once or twice a year. Though there is no need to worry, Echeveria Topsy Turvy can tolerate remaining in the same pot for a while. However, when the bottom leaves begin to dry up and fall off, it may be time to move to a larger container.