Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilise what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
When propagating succulents from leaves, how long does it take?
- Leaf propagation: Typically, it takes 2 weeks for roots to develop through leaf propagation. New leaves will start to form in around 8 weeks and can optionally be transplanted to a tiny container.
- Root formation typically takes 4 weeks, but it can occasionally take longer with stem proliferation.
- Offset propagation: Once the pups have developed a calloused skin, the roots typically begin to grow after 4 to 10 weeks.
- The process of propagating seeds takes the longest—cactus seeds can take anything from three weeks to a year to even begin to germinate. After that, the seedling takes a very long period to mature into a full-grown adult.
How can a succulent be multiplied the quickest?
So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.
Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.
Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.
Always check that the stem cuttings are a respectable size for the plant’s typical size.
According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.
Succulents can be grown again from cuttings.
It’s simple to learn how to propagate succulents, and it’s a terrific method to reduce the cost of purchasing new plants. You can take cuttings, leaves, or offsets from the succulents you currently own rather than purchasing more from the nursery.
If you don’t have a green thumb, propagating succulents is a great way to enjoy a little gardening. Succulents only need occasional care, and there are only a few easy tasks involved.
Can a new succulent be grown from a leaf?
Taking an active, healthy leaf from a mature succulent plant and utilising it to establish a new plant is known as “propagating with leaf cuttings.” Because the leaves of succulents with fleshy, plump leaves, like echeveria, are simple to snap off cleanly, this method of propagation works well with them.
While some leaves may simply pop off with a little tug, others could necessitate the use of a sharp knife. Take a healthy leaf from the plant’s base with clean hands or a sterile knife, making sure to remove the full, undamaged leaf.
After being removed, allow the leaf to recover for about four days in a warm, well-lit place so that the wound can callus over. When the leaf has calloused, prepare a fresh planter with soil, fill it with water, and set the callused leaf on top of the soil for multiplication.
When the earth is dry, spritz your leaves with a spray bottle. Keep them warm, in a room with lots of light, but out of direct sunlight. They must be kept warm and moist.
Little roots and leaves will start to emerge after around three weeks! A succulent may need a few months to grow large enough to be replanted (photos above are after about 8 weeks). When the leaf eventually gets brown and falls off, you’ll know it’s time. This indicates that the succulent no longer requires the leaf because it has consumed all of its nutrients.
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
Why aren’t the leaves on my succulent growing?
You recently purchased some gorgeous succulent cuttings from a nursery in your neighbourhood, or even better, online with free shipping. The cuttings you purchased are incredibly lovely, and you can’t wait to see them take root, develop, and flourish just as you anticipate!
Sadly, weeks have passed and your succulent cuttings haven’t even the least bit rooted! Now that the succulent cuttings appear dried up, wrinkled, or dying, you’re probably wondering why they aren’t taking root.
Be kind to yourself because this is something that occurs frequently. Rooting succulent cuttings is a challenge for many succulent growers, especially beginners. Especially if you recently purchased these cuttings and they aren’t rooted, it might be really discouraging.
Your succulent cuttings not rooting for a variety of reasons. It can be the result of overwatering, underwatering, insufficient sunlight, a lack of nutrients, improper soil use, or improper potting.
Not to worry! By the time you finish reading this article, you’ll understand exactly why your succulent cuttings aren’t rooted and how to fix the problem.
Succulent leaves can they grow in water?
In water, most succulents can be multiplied. If you have a succulent that is stretched out, you can take stem cuttings and root those, or you can create roots from healthy single leaves.
The most successful succulents are those with thick, meaty leaves, like the Echeveria plant. So when you first try your hand at succulent propagation, these are an excellent option.
It makes sense to multiply a few leaves at once. By doing this, you increase the likelihood that there will be survivors. While others may decay or just wilt and wither away, certain succulent leaves will only produce roots and no new plant.
Must I remove the dead leaves from my succulents?
One of the most enjoyable aspects of growing succulents, in our opinion, is getting to remove all the dried leaves from the area around your plant’s base. Most individuals find it to be quite calming and enjoyable since it is so enjoyable and genuinely healing.
Aside from that interesting fact, you should remove any dried leaves and blossoms for the sake of your plant’s health. You can maintain the happiness and health of your plants by carrying out this easy chore.
New growth, New plants, New Blooms
Energy can be recycled back into the plant by removing any spent, dried-up bloom stalks and dry leaves from your succulents. Your plant will be able to produce new growth, blooms, and occasionally new rosettes or pups if you do this. And who doesn’t desire succulents that are bigger and more numerous?
To remove, gently lift the plant’s healthy leaves, and then pull any dried-out leaves from beneath. They ought to be rather simple to remove. If they don’t, you can either leave them to dry out more or, if they are past their prime and unsightly, try to snap them off completely.
Good Air Flow
Humidity, wetness, and/or succulents make for a dangerous and occasionally lethal mix. You may provide your plants sufficient air circulation and make it easier for the soil to dry out by removing these dried leaves from beneath your plants. Removing these dried leaves will assist avoid the growth of rot, mildew, and/or illnesses, especially in humid or very rainy weather. Additionally, air circulation around the plant’s base is made possible by this procedure.
Less Pests
Succulents are susceptible to a wide range of pest attacks, just like most other plants. Getting rid of the dead leaves beneath your plant can also help deter pests. Little insects adore wet areas where they may hide and reproduce. A succulent’s compressed lower leaves are likely to retain moisture around the plant’s base, which will attract pests. Your plant has a higher chance of repelling these pests if you remove these leaves.
Another alluring nesting habitat for bugs, specifically aphids, can be bloom stalks. If you see that your blooms are starting to develop this bug problem, you can either completely remove the bloom stalk or treat the bloom with a mix of diluted rubbing alcohol and water. These bugs frequently spread disease to surrounding plants and flowers if the situation is left untreated. In order to remove bloom stalks from your plant, either gently wriggle the stalk back and forth or, if it hasn’t dried up yet, snap or cut it low.
Do we have any ASMR fans out there??
We made this little movie to demonstrate how to take these leaves off your plants, but since we adore succulents, it also serves as our take on ASMR. Am I correct?
(According to The Urban Dictionary, ASMR’s sole function is to help people unwind. The goal of ASMR videos is to relax the viewer by sending a tingling sensation down their spine or back.
Propagate succulent stems above water
Succulents can indeed be grown hydroponically, but you should use caution when doing so. Remove the lowest leaves from your mother plant by making a clean cut. After that, take a water jar and wrap it with plastic wrap. Make a few holes in it, and with the stem never actually touching the water, insert the exposed nodes about half an inch above the water. Whenever the water evaporates, top it off. Your roots should begin to expand in two to three weeks.
Propagate succulents on a wet paper towel
Leaving succulents on a paper towel is another approach to grow them. For a few days, let the ends of your succulent leaf cuttings dry out on a piece of paper towel on a tray. Spray water on the paper towel after a few days, then do it again after a few days. You should begin to notice roots and pups after a few weeks. Some gardeners will additionally cover the paper towel with a clear lid with holes or plastic wrap. You can eventually move your succulents into soil using both the jar and paper towel methods. Just remember that not all of your cuttings might grow successfully because the roots might be shocked by being transplanted into a different media.
Since succulents have so many fleshy leaves and may grow rapidly, you’ll always have room to experiment even if not all of your plants produce roots and pups. You’ll be able to share your succulents sooner than you think if you use leaf cuttings, new cactus soil, bright indirect light, and sporadic spritzes of water.