Growing your collection of succulents without spending a lot of money is easy and affordable with self-propagation. In the simplest terms, propagation is the process of using a component from an established succulent to create a new plant. Offsets, leaf cuttings, stem cuttings, or seeds from a mature plant can all be used to accomplish the task. Succulent propagation is normally a pretty straightforward process, but certain plants are more challenging to grow than others. See the 4 basic techniques for propagating succulents below to choose the one you want to try.
How are succulents propagated from leaves?
Taking an active, healthy leaf from a mature succulent plant and utilizing it to establish a new plant is known as “propagating with leaf cuttings.” Because the leaves of succulents with fleshy, plump leaves, like echeveria, are simple to snap off cleanly, this method of propagation works well with them.
While some leaves may simply pop off with a little tug, others could necessitate the use of a sharp knife. Take a healthy leaf from the plant’s base with clean hands or a sterile knife, making sure to remove the full, undamaged leaf.
After being removed, allow the leaf to recover for about four days in a warm, well-lit place so that the wound can callus over. When the leaf has calloused, prepare a fresh planter with soil, fill it with water, and set the callused leaf on top of the soil for multiplication.
When the earth is dry, spritz your leaves with a spray bottle. Keep them warm, in a room with lots of light, but out of direct sunlight. They must be kept warm and moist.
Little roots and leaves will start to emerge after around three weeks! A succulent may need a few months to grow large enough to be replanted (photos above are after about 8 weeks). When the leaf eventually gets brown and falls off, you’ll know it’s time. This indicates that the succulent no longer requires the leaf because it has consumed all of its nutrients.
Succulents from leaves can be rooted?
In the spring and summer, when leaves and stems are ready for active growth, it is simplest to propagate succulent leaves and cuttings. Most common succulents can be multiplied successfully from individual leaves or stem fragments.
- For succulents with fleshy leaves, like jade plants or echeveria and sempervivum rosettes, leaf propagation works well. The leaf must remain intact for the root to take. To loosen the leaf, gently bounce it back and forth while holding it between your forefinger and thumb. After that, carefully separate the leaf from the parent plant, keeping the base in tact.
- Succulents with distinct stems, including stacked crassulas and spreading or erect sedums, respond well to stem cuttings. Cutting succulents is analogous to propagating soft-stemmed plants. To cut stem tips, use a sharp knife, or take an entire stem to make many starts. Each cutting should be 2 to 3 inches long and have multiple leaves. Only the top two leaves should be kept.
Succulent leaves can they grow in water?
In water, most succulents can be multiplied. If you have a succulent that is stretched out, you can take stem cuttings and root those, or you can create roots from healthy single leaves.
The most successful succulents are those with thick, meaty leaves, like the Echeveria plant. So when you first try your hand at succulent propagation, these are an excellent option.
It makes sense to multiply a few leaves at once. By doing this, you increase the likelihood that there will be survivors. While others may decay or just wilt and wither away, certain succulent leaves will only produce roots and no new plant.
What is the time required to grow succulents from leaves?
- Leaf propagation: Typically, it takes 2 weeks for roots to develop through leaf propagation. New leaves will start to form in around 8 weeks and can optionally be transplanted to a tiny container.
- Root formation typically takes 4 weeks, but it can occasionally take longer with stem proliferation.
- Offset propagation: Once the pups have developed a calloused skin, the roots typically begin to grow after 4 to 10 weeks.
- The process of propagating seeds takes the longest—cactus seeds can take anything from three weeks to a year to even begin to germinate. After that, the seedling takes a very long period to mature into a full-grown adult.
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
How quickly can you propagate succulents?
So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.
Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.
Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.
Always check that the stem cuttings are a respectable size for the plant’s typical size.
According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.
What succulent is the most straightforward to grow?
Having a collection of succulents might be most gratifying when you propagate them. You can increase the number of a popular plant in your yard through propagation, swap plants with friends, and even preserve a dying plant. Here are our top ten picks for beginner-friendly succulents.
Sedum rubrotinctum (Pork and Beans or Jelly Beans)
Bright crimson in direct sunlight; green in shadow. This resilient Sedum quickly fills in container gardens and rock gardens. Remove the leaves and place yourself on a damp, well-draining surface.
Echeveria ‘Lola’
one of the most productive Echeveria leaf plants. Both newcomers and seasoned collectors adore the flawlessly round rosette and the pearly pink leaves. They germinate swiftly and successfully spread through leaves in large numbers.
Sedum nussbaumerianum
difficult in dry, warm areas with little water. Easy to grow from leaf or tip cuttings. Before planting in soil, wait for a scab to develop (this takes about a week). This species’ colors and leaf shapes vary widely.
Sempervivum arachnoideum (Cobweb Houseleek)
Fast-growing and yields more offsets than you could possibly use! Plant cuttings directly in damp soil after cutting propagation, and you’ll observe roots forming in approximately a week.
Graptopetalum paraguayense (Ghost Plant)
A stunning hanging rosette succulent that may change color depending on the environment to orange, bronze, pink, and purple. It is quite simple to spread by leaves; you might even notice one growing on its own.
Echeveria colorata
Initially slow, but well worth the wait. Echeveria colorata starts out by producing lovely leaf sprouts with scarlet tips. Before removing the mother leaf from the new plant, wait until it has totally died.
Echeveria lilacina (Ghost Echeveria)
We frequently see the succulent Echeveria lilacina multiplying by itself. By planting leaves gently in soil with their roots down and leaf up, you can prevent the fast curling that occurs with leaves.
Is it better to grow succulents in soil or water for reproduction?
Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.
Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.
According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.
I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.
According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.
The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.
As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.
The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.
The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.
I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.
I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).
Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.
I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.
The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.
I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.
The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.
Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.
Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.
Update:
Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?
A Step-by-Step Guide for How to Procreate in Water is Provided Below:
acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.
OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.
Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.
Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.
To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.
Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.
Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.
Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)
Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.
occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. In water, the cuttings will perpetually live and thrive. Every few weeks or as needed, replace the water and add fresh, clean water.
Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.
My opinions on the spread of water:
I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.
The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.
Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.
According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.
About
You’ve come to the correct location if, like me, you enjoy succulents. This website is a repository for the succulent-growing knowledge I’ve accumulated over the years and am still learning. Although I am by no means an expert on succulents and cacti, this website was created as a result of years of hard work, love, and many mistakes and learning opportunities.