How To Propagate Spring Cactus

Moderate illumination is best; avoid exposing it for extended periods to both deep shade and direct sunlight. There will be little or no growth and few or no blossoms under deep shade.

However, because the Easter Cactus is not a desert cactus, direct sunlight should be avoided. The leaves will turn scarlet from too much sunshine.

Watering

They can survive during droughts by using the water they have stored inside their fleshy, thick leaves, much like other cacti can. However, if the soil is totally allowed to dry out for an extended period of time, the plant will begin to shed its leaf segments, causing a strop. Instead of continually being wet, aim for consistently moist soil, and use tepid water to water rather than cold.

Humidity

If the plant has been placed in a dry environment, it is suggested that the pot be placed in a pebble tray or that the leaves be misted several times per month (their natural habitat are shady, dank and moisture filled forests).

Temperature

The Easter Cactus thrives in most houses’ typical temperatures. From October until the beginning of the next year, the plant has to rest, and this needs to happen in a somewhat cooler (7C to 15C/45F to 59F) room. The usual option would be an unheated room.

Repotting

It takes some time for it to become pot-bound because of how slowly it grows. If necessary, repot after flowering in the early summer, although you probably won’t need to do it more than a few times a decade.

Propagation

In the summer, you can take off a portion of one of the stems with two or three “segments” attached to reproduce your Easter cactus. Before placing the lower segment a few millimeters (or half an inch) into a pot with compost, give the cut a day or so to somewhat dry out.

Make sure they are planted in the direction they were growing; for example, after the cutting has been potted up, the top of the segment should remain at the top. Keep the clippings just barely damp (too much and they will rot). This process is referred to as leaf cutting propagation.

Flowers

Yes, the Easter Cactus has flowers, and they are really stunning, especially when they bloom in large numbers. Moving it outside is the key to getting lots of blooms from one year to the next. Put the plant outside in a safe, shaded area between the months of June and August.

Can a cactus be rooted in water?

Cacti are known for their capacity to endure in extremely dry conditions, such as deserts. However, these robust plants are frequently kept indoors as houseplants. You could try to root your own cacti if you already have a few and desire more without paying any money.

Can cacti grow roots in water? A form of succulent called a cactus can take root in either water or soil. While many cacti will also root in water, other kinds will root better in dirt. You can attempt growing extra plants without having to buy them if you try roots your cactus in water.

There is no assurance that any cactus will thrive in water or soil; occasionally, the conditions are simply not right for the plant. The good news is that roots your cactus in water is simple to do and has a strong probability of working.

Can a cactus be grown from a cutting?

Probably the most frequent and straightforward method of propagation is stem cuttings. Stem cuttings are an effective method for multiplying many cacti. Stem cuttings from an existing plant are removed, then left to calluse and dry out. Eventually, the cuttings will begin to take root from the cut end and grow into a new plant.

Some cacti that are frequently multiplied via stem cuttings include:

  • Prickly pears or opuntia
  • Collapsed cactus
  • Globular and pincushion cacti

Where should cacti be chopped to spread?

If you want indoor plants that practically care for themselves, succulents and cactus plants are the ideal choice.

As detailed here, stem or leaf cuttings can be used to readily propagate the majority of cacti and succulents. Always remove entire segments from cacti with segmented stems (such as Christmas cacti and prickly pears), as cuttings don’t divide segments in half.

Aloes, haworthias, and agaves are clump-forming succulents that can be divided by simply removing the plant from its container and slicing the rootball. Numerous Mammillaria and Echinopsis cacti can be separated, or individual heads can be removed and used as cuttings.

In our No Fuss video guide, Kevin Smith of Gardeners’ World Magazine demonstrates how to use cactus plants to make a visually appealing display. Kevin discusses the benefits of using salad tongs to handle cacti, the best compost to use, and how to make attractive mulch.

Step 1

Select a healthy stem that is at least 10 cm long and use snips to cleanly cut it off. When handling spiky cacti, use tongs. Remove entire leaves from plants without stems by hand; don’t chop them off. Until the cut surfaces have healed over, leave cuttings on a window sill.

Step 3

After heavily watering, set the pot on a warm ledge that’s preferable out of the sun. Cuttings of succulents or cacti shouldn’t be put in propagators or covered with plastic bags.

Step 4

Watch the cutting and moisten the compost when it feels dry. The majority of cactus and succulent cuttings take a month or less to root, although new growth could take longer.

How do you re-root a cactus fragment?

Large desert cactus, such as the prickly pear (Opuntia spp. ), can be rooted either indoors or outdoors in U.S. Department of Agriculture plant hardiness zones 3b through 11. Usually, smaller desert plants are rooted in flower pots. One-third to one-half of the pad or stem should be buried, bottom end down, in the potting media after making a small hole in it. Place in a warm environment with filtered light that is bright. Wait to water the plant until the roots start to form.

Why is the Spring Cactus deteriorating?

If the pads come off, your cactus might appear to be crumbling. The plant may be stressed as a result of either overwatering or underwatering, which could be the cause. The pads that fall off can always be taken and rooted in potting soil for new plants.

What is the time required for cactus cuttings to root?

Even for novice gardeners, cactus species are among the simplest plants to root at home. The method is effective throughout the year, although cactus cuttings potted in late summer to early autumn develop the quickest roots and healthiest plants. Cactus cuttings can root easily, but they must be carefully prepared beforehand and potted in sterile rooting medium to prevent them from wilting and decomposing before they take root. Most cactus cuttings that have been potted usually take four to six weeks to root and are prepared for transfer one month afterwards.

Is it better to grow succulents in soil or water for reproduction?

Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.

Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.

According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.

I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.

According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.

The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.

As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.

The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.

The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.

I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.

I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).

Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.

I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.

The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.

I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.

The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.

Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.

Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.

Update:

Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?

A Step-by-Step Guide for How to Procreate in Water is Provided Below:

acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.

OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.

Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.

Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.

To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.

Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.

Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.

Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)

Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.

occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.

Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.

Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. In water, the cuttings will perpetually live and thrive. Every few weeks or as needed, replace the water and add fresh, clean water.

Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.

My opinions on the spread of water:

I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.

The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.

Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.

According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.

About

You’ve come to the correct location if, like me, you enjoy succulents. This website is a repository for the succulent-growing knowledge I’ve accumulated over the years and am still learning. Although I am by no means an expert on succulents and cacti, this website was created as a result of years of hard work, love, and many mistakes and learning opportunities.