The summer is the best season to grow a bunny ear cactus since it gives the young plants more time to take root before the chilly winter months approach.
- 1. Take off a few of the mother plant’s mature pads. To prevent being poked by the cactus plant’s spines, use tweezers.
- 2. Let the trimmings dry. Over the course of several days, allow the cuttings to dry out and callus.
- 3. Plant the trimmings. In a clay pot, bury the dried cuttings under an inch of cactus potting soil.
- 4. Locate a sun-filled area. Wait a few days for the root system to form, then place it somewhere sunny.
- 5. Frequently water the plant. Throughout the cactus’ first year, water it frequently to promote root development.
General Care for Opuntia microdasys albata “Bunny Ears
Opuntia microdasys albata “Bunny Ears” is a low-maintenance plant that thrives indoors. Although the aureoles are not covered with spines, they can still poke, so keep them away from youngsters and dogs when handling.
Watering
Albata Opuntia microdasys “Compared to other succulents, bunny ears often require a little less water. You should utilize the “Use the “soak and dry” method, letting the soil to dry out in between waterings.
Where to Plant
It is advisable to grow this succulent in a container that can be taken indoors if you reside in a zone that experiences temperatures below 20 F (-6.7 C). It thrives in full to some sun.
If growing outdoors, make sure to put it in a location with lots of space.
It can grow to be 6 feet (1.8 meters) wide! Plants should be placed in a garden area with six hours of direct sunlight each day. If you’re planting indoors, choose a location with lots of natural light, such as next to a window with a southern orientation (if you live in the Northern Hemisphere).
How to Propagate Opuntia microdasys albata “Bunny Ears
Albata Opuntia microdasys Cuttings can be used to spread Bunny Ears. As Bunny Ears spreads out, it will create tiny offsets. Make use of a clean, sharp knife to separate these from the main plant.
Place the Opuntia pads on top of a soil that drains properly. When the soil feels dry, water it. The cactus pads may take many weeks to develop roots. Plant your “Bunny Ears” whenever the roots start to appear, and then water it just like a regular succulent.
Can cactus cuttings be propagated in water?
It’s time to get your cutting ready for planting in a pot once it has dried! Cactus propagation can potentially be done in water, just like with other houseplants, but it’s not a very usual procedure because they thrive in soil.
Your brand-new cutting will require excellent drainage to survive, much like other cacti (unless it’s a jungle cactus like the Christmas cactus). The roots of cacti have not developed to become used to extended wet periods. They enjoy a cool splash, but the soil shouldn’t be prone to being wet or humid afterward; instead, it should immediately dry out again.
It’s not too difficult to spot an excellent cactus soil because it will be grippy and contain little to no potting soil at all. You can either purchase a prepared cactus soil combination or create your own by mixing 1 part potting soil, 1 part perlite, and 1 part orchid bark (not too gritty) for your cutting.
As far as planters go, as long as they have proper drainage, you should be set to go. Standard plastic nursery containers are excellent, but some cactus growers like to use clay planters to provide even more drainage. Water can really evaporate through the walls of this substance since it is porous.
Advice: Visit the article on planting succulents indoors for further details on how to grow succulents like cacti.
When will a rabbit ear cactus take root?
As with most succulents, a pad removed from the cactus can be used to start new rabbit ears plants. When removing a leaf, proceed with the utmost care because the glochids are prone to dislodging and are challenging to remove from the skin.
Pick up the pad with newspaper or heavy gloves. Insert into the cactus soil after allowing the end to callus for a few days. For cultivating bunny ears cactus, use a quality cactus mix or create your own by mixing potting soil, sand, and peat moss in equal parts. Usually, the pad takes a few weeks to root.
For indoor use, bunny ears cactus needs a container with good drainage. The primary killer of these plants, excess moisture, can evaporate in an unglazed clay container. Although they can also be grown outdoors, they are only hardy in USDA zones 9 to 11.
Can cactus be chopped and then regrown?
Probably the most frequent and straightforward method of propagation is stem cuttings. Stem cuttings are an effective method for multiplying many cacti. Stem cuttings from an existing plant are removed, then left to calluse and dry out. Eventually, the cuttings will begin to take root from the cut end and grow into a new plant.
Some cacti that are frequently multiplied via stem cuttings include:
- Prickly pears or opuntia
- Collapsed cactus
- Globular and pincushion cacti
How are rabbit ears cut into cuttings?
How to Grow a Bunny Ear Cactus in 5 Easy Steps
- From the mother plant, remove a few mature pads.
- Let the cuttings dry out.
- Incorporate the clippings.
- Find a sunny location.
- Regularly water the plant.
How long does cactus take to spread?
Cacti have benefited from this summer’s favorable weather by responding with fresh growth. In just a few weeks, my bunny ears cactus, Opuntia microdasys, produced three new pads. That is, until I made the decision to wipe the window behind it, at which point all three of the fresh pads were adhered to the cleaning cloth with one fairly awkward motion.
Not a big deal, though, as cacti are remarkably simple to spread. The optimal time to take cuttings is during the summer, but I’ve had success taking them as late as now, and emergency cuttings are the best way to save the plant if life provides you unexpected bunny ears to propagate or the bottom of your cactus starts to rot.
You only need to remove one segment from a prickly pear, a rabbit ear, or any other segmented cactus to produce a new plant. These are some of the simplest to reproduce; just gently cut off a part while using thick gloves or kitchen tongs (never assume any cactus spine will be nice, no matter how small). You can cut off or divide each head of a mound-forming cactus, such as a mammillaria or an echinopsis, at the soil level. Use a sharp knife to make a straight, precise cut. Take a significant chunk of the head off a columnar cactus if possible. The similar method can be used to salvage the healthy portion of rotting bases while discarding the remainder.
Lay the cutting carefully on its side on a saucer. Before it can root, the exposed flesh needs to callus over, and exposure to air causes this to happen. With a small specimen, this might take a day, but with a bigger surface area, it might take a week.
You can place a hard callus into a tiny pot once it has hardened. Cacti require extremely free-draining environments for their roots. I advise using a ratio of five parts grit and horticultural sand to one part compost when we enter the latent phase of growth. Running water through the mixture in the pot will allow you to check whether it drains rapidly.
Pads or segments can be positioned either upright or on the ground. Cacti that are upright in the pot should stay that way. Water as soon as you plant and again when the soil is entirely dry; throughout the winter, this may only require one watering until spring. Leave the plant in a well-lit area away from the sun.
Cuttings can be completed in 24 hours in the summer but up to three or four months in the winter. Either roots will show through the drainage holes, or the cutting will feel firm in the container, indicating that it is rooted. And fresh spines will grow in the spring.
When is the best time to collect cactus cuttings?
Cacti can be propagated in a variety of methods, just like succulents. Whatever method you decide to use to increase your cactus collection, you should be aware that it is always ideal to propagate cacti while they are actively developing, which for most cacti typically occurs in late Spring or Summer. This ought to increase your chances of success, particularly if you choose to grow your cactus from cuttings, as its roots can quickly set down during this period.
How do you re-root a cactus fragment?
Large desert cactus, such as the prickly pear (Opuntia spp. ), can be rooted either indoors or outdoors in U.S. Department of Agriculture plant hardiness zones 3b through 11. Usually, smaller desert plants are rooted in flower pots. One-third to one-half of the pad or stem should be buried, bottom end down, in the potting media after making a small hole in it. Place in a warm environment with filtered light that is bright. Wait to water the plant until the roots start to form.
Can cacti grow roots in water?
Cacti are known for their capacity to endure in extremely dry conditions, such as deserts. However, these robust plants are frequently kept indoors as houseplants. You could try to root your own cacti if you already have a few and desire more without paying any money.
Can cacti grow roots in water? A form of succulent called a cactus can take root in either water or soil. While many cacti will also root in water, other kinds will root better in dirt. You can attempt growing extra plants without having to buy them if you try roots your cactus in water.
There is no assurance that any cactus will thrive in water or soil; occasionally, the conditions are simply not right for the plant. The good news is that roots your cactus in water is simple to do and has a strong probability of working.
Can succulent cuttings be planted directly in the ground?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
Is it better to grow succulents in soil or water for reproduction?
Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.
Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.
According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.
I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.
According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.
The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.
As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.
The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.
The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.
I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.
I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).
Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.
I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.
The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.
I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.
The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.
Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.
Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.
Update:
Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?
A Step-by-Step Guide for How to Procreate in Water is Provided Below:
acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.
OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.
Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.
Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.
To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.
Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.
Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.
Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)
Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.
occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. In water, the cuttings will perpetually live and thrive. Every few weeks or as needed, replace the water and add fresh, clean water.
Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.
My opinions on the spread of water:
I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.
The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.
Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.
According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.