- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
Can succulents be multiplied?
What is there to love other than a succulent? Obviously, a full garden of succulents! Fortunately for us, it’s simple to propagate a variety of these resilient, vibrant plants at home. We can’t wait to see succulents growing all year long in containers around the house and garden; there are various easy ways to reproduce them.
Propagating by Division: Plants that have gotten too leggy perform best with this method, which produces new succulents from cuttings. Start by delicately removing any leaves that may be attached to the stem below the rosette; be sure to preserve the leaf’s base while you do so. After all the leaves have been eliminated, cut the rosette with shears, leaving a brief stem intact. The cuttings should be let to dry in an empty tray for a few days until the raw ends have calloused. The cuttings can then be rooted in either water or soil.
Soil: After the stems have calloused, set the cuttings on top of a shallow tray filled with well-draining cactus/succulent soil. From the base of the cuttings, roots and little plants will start to emerge in a few weeks. Once the roots start to show, water sparingly once a week; take care not to overwater. The parent leaf will eventually wither; carefully remove it while taking care not to harm the young roots. Your propagated succulents can be replanted once they have established roots. As soon as the plants are established, keep them out of direct sunlight.
Water: After the stem has calloused, place a cutting with the end barely visible above the water’s surface on the lip of a glass or jar filled with water. Pick a sunny location for your glass. The incision will eventually produce roots that extend toward the water. Once roots have sprouted, your new succulent can either be replanted in succulent potting soil or allowed to remain submerged in water as illustrated above.
Offsets are little plants that develop at the base of the main specimen, and many species of succulents, such as aloe, hens and chicks, and some cacti, will generate them. Check for root growth after an offset has developed for two to three weeks before carefully twisting, cutting, or using a sharp knife to separate it from the main stem. Be cautious to prevent destroying any already-formed roots. Follow the directions above for propagating in soil or water, letting the offsets dry, establish roots, and then repot when they have had time to callus any exposed regions. Removing offsets has the added benefit of enhancing the health of your current succulents and redirecting energy into the growth of the primary plant.
How quickly can you propagate succulents?
So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.
Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.
Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.
Always check that the stem cuttings are a respectable size for the plant’s typical size.
According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.
How do I launch a tiny succulent company?
I originally believed I was going to create Sedum plugs for anyone wanting to put up a green roof when I first started selling my hardy succulents (because it was the only plant I could keep alive in my climate).
And I did, right up until the summer, when somebody wanted to buy a lot of Sedum cuttings so they could plant them on the roof themselves.
I cut and packaged hundreds of healthy and perhaps viable cuttings for the customer’s green roof over the course of several months. Since they swiftly got divorced and I never heard anything else about it, I have no idea how this turned out.
Steps for Starting a Succulent Plant Microbusiness;
- Pick a specialty first. And be willing to make changes if you receive criticism from clients or friends.
- Make a few prototypes to show yourself and others that this will be really amazing.
- Promote the prototypes by posting on social media and requesting comments, criticism, or feedback.
- Adjust the product.
- Go back to step three.
- Restart production while remaining open to modifying your specialty, procedures, and techniques.
The same year, I received multiple requests quickly one after another from brides who wanted to buy a lot of tiny succulents.
Although I had a lot of Sempervivum, which with their unique colors and shapes so appealed to me, I realized they probably preferred sensitive ones. I suggested it, and they leaped at the chance to cross it off their list.
The good thing about wedding favors is that they usually have a considerable lead time and a deadline.
I made the decision to try out the numerous 72 cell plug trays that I had purchased for the Sedum plugs on Sempervivum.
In the course of the following few years of making Sempervivum plugs, I discovered a couple of them that enjoyed having numerous families of uniformly sized chicks.
These mother hens were placed in my rock walls so that I could watch over them and pick them every few days in the late summer.
After harvesting them, I placed the chicks in the plug trays on top of the soil, gave them time to root in the greenhouse or in outdoor beds, and then let them to grow.
They would develop over the winter. To keep rabbits away, the only thing I would do is cover them with wire fence.
I would bring trays back into the greenhouse in April, which is when the wedding season starts, to get a jump start on the season.
They had a chance to dry off in advance by the time shipping time, which was two to three weeks before to the big event.
Drying them ensures that they won’t decay and won’t get stretched in the darkness of the box during shipping. The bride and her cheerful bridesmaids are then in charge of getting them watered, putting each one in a nice container, and getting them ready to serve to their guests.
A Bit About Pricing
Avoid underselling yourself. Again, this is market research. Look at what competitors are charging and adjust your product’s price accordingly.
I found that multiples of 72 (a full tray) or 36 (a half tray) worked nicely because a wedding frequently had hundreds of attendees. This provides the bride with a few additional plants in case there are too many centerpieces or table flowers.
Since the trays are just made of thin plastic, I found out a way to box them for shipping by cutting them in half (with scissors).
They fit exactly (covered by thick newspaper) into a box from a liquor store. Don’t waste your money on specialized single-use shipping boxes; instead, utilize what works!
Looking back, there are two things that particularly stick out to me: first, how crucial it is to conduct market research to determine whether potential customers will actually purchase your product. and the significance of maintaining flexibility and being receptive to market shifts.
The first brides sought me, and if I hadn’t listened, I would have missed out on a really wonderful (and lucrative) small side business that blossomed into so much more.
For instance, why not hold a seminar or workshop where people can make their own if you decide (after conducting your market research, of course) that you want to create wonderful succulent wreaths to sell but you keep receiving comments and criticisms about the price being too high?
You buy the materials in bulk, like you already do to make your own wreaths.
For your pupils, mark them up a little bit, they bring their own succulent cuttings or buy them from you, and you all have a great time making something lovely to take home.
The present that keeps giving is the kindness you receive. This might cause your company to change course in a way that makes you incredibly happy and satisfied.
Make sure to invite a journalist so they can cover it for the neighborhood paper as well!
Hire someone to record the session on video in order to use it as material for blog entries, social media posts, or as promotional material for other seminars. You might be onto something!
After three years of serving as the company’s backbone by giving brides wedding favors, I decided to sell it to someone who was already engaged in a related endeavor.
I was well-positioned thanks to the equity I had amassed, and the sale brought in some money. This is what I mean when I say that either I sell it to someone else or my heirs will have to do it.
Is it possible to remove a piece of a succulent and replant it?
Because succulents are such hardy plants, you can actually plant a piece of one and it will develop into a new plant. It may sound like a horror film or the premise of an upcoming science fiction drama on Netflix, but it’s truly possible to regenerate something new from a severed limb. Even if one of its branches is cut off, they will still manage to survive.
Yes, you can prune or cut off a section of a succulent and plant it elsewhere. The clipped succulent piece will adapt to its new home and develop into a full-fledged succulent with the right growing circumstances.
If you want to learn more about pruning succulents, keep reading. It’s like getting numerous plants for the price of one if you get the technique down!
Is it better to grow succulents in soil or water for reproduction?
Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.
Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.
According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.
I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.
According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.
The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.
As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.
The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.
The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.
I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.
I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).
Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.
I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.
The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.
I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.
The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.
Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.
Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.
Update:
Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?
A Step-by-Step Guide for How to Procreate in Water is Provided Below:
acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.
OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.
Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.
Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.
To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.
Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.
Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.
Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)
Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.
occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. The cuttings will continue to live and survive in water indefinitely. Every few weeks or as needed, replace the water and add fresh, clean water.
Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.
My opinions on the spread of water:
I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.
The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.
Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.
According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.