How To Plant Succulents In Driftwood

Once the succulents are perfectly positioned, you’re done! Watering the planter immediately away won’t be a good idea. Give the roots one or two days to recover. After that, you should thoroughly water the planter to aid the succulents foster the establishment of their roots. For the sphagnum moss to begin absorbing the water, you might need to repeatedly pour water over the planter. This planter needs to be watered a little more frequently than most of your arrangements because there isn’t much moss or depth to it.

My favourite undertaking to date is this driftwood planter. I like that it can live here all year round, and I’m thrilled with the selection of cold-tolerant succulents I was able to discover. The scattered yellow flecks add a bit of visual intrigue and contrast to the reds and greens. I can’t wait to observe the changes as it develops and further fills in! Once more, I’d like to thank my grandmother for locating this lovely piece for me to use as a succulent planter.

What could I grow inside driftwood?

For your succulents, create a DIY driftwood planter. You must be wondering how to grow plants in driftwood, so let me explain.

The driftwood’s inherent grooves and nooks are what allow plants to grow in them. These offer the necessary depth for the growth of plants.

And because many succulents have shorter roots and don’t require a lot of depth to thrive, they’re a wonderful option for a DIY driftwood planter.

Don’t be frightened to plant air plants on the driftwood; they work well as planters.

So why am I using cedar rather than real driftwood? I have a lot of forests behind my property, and I’m lucky that there are trails I can utilise to hike.

I frequently encountered cedar tree stumps on my walks that had been removed at some point because they were dead or close to it.

They were easily pickable because they had decayed from the ground, and I found them to be lovely and distinctive in appearance—they reminded me of driftwood.

Since I don’t have easy access to driftwood, I decided to use the cedar tree trunks as “driftwood planters” instead. By the way, log planters or even branch planters are other names for driftwood planters, so there you go.

The only downside to them is that cedar is a very hard wood, making it difficult to carve out deeper divots for the succulents to be planted.

If you haven’t seen my many planters or would like to see some creative planter crafts, check out these tutorials:

How are succulent logs planted?

This project is for you if your yard has a pile of logs that you need for firewood or other purposes. Succulents or other small plants thrive in this shallow wood log planter, which also makes a striking outdoor display. It is constructed out of a genuine wooden log and was carved out using a drill press, hole saw, and chisel. The best part is that this project can be completed in an afternoon or less for less than $40, making it one of our favourite wood log crafts.

How to hollow out a log

Choose a log that you like to start with. We picked a log with some character, some moss, and some discolouration. The fact that it is dry and not moist in the middle is crucial in this situation. Then, there are numerous techniques from which to choose in order to hollow out the wood log. There are two methods you can pick from: using a chainsaw to cut out the centre or drilling holes with a Forstner bit and then using a chisel to remove the edges. However, because we used a hardwood, we decided to use a 3-in. diameter hole saw in a drill press to carve out the centre of our log planter.

Stabilize the Wood Log

Locate the log’s most stable position, then fasten the base side to a board. The length and width of this wood board should be slightly larger than the log. The board should then be fastened to the log using long screws. In order for your hole saw cuts to be consistently parallel across the wood log, it is crucial to position the log further back on the wood board so that it may ride against the drill press fence. However, provide enough space so the log won’t be pressing up against the fence, peeling the bark off in the process. When cutting through the log with a hole saw and drill press, the board on the log will help support the log.

Cut Into the Wood Log

It’s a good idea to approximately mark the area where the opening will be before you start cutting into the log. We calculated that the opening should contain two inches of bark on either side. Clamp the log firmly to the drill press table so that you can begin carving the wood. We sliced into the timber with a 3-in. diameter hole saw in a drill press. To get the length of the aperture you want for the log planter, make a series of overlapping cuts with the hole saw as deep as it will go. We’ll need to make a second pass after roughly chiselling out this top layer of hole saw cuts because the maximum depth for our hole saw was 1-1/2 in. and the necessary depth for the planter aperture is 3 in.

Carve Out Planter Opening

When the hole saw has finished its work, use a chisel and a mallet or hammer to remove the cuts. The most time-consuming step is rounding the corners, but since the log planter will be stuffed with soil and succulents nonetheless, it doesn’t have to be flawless. Avoiding chipping off the bark is the hardest issue here.

Add Charcoal to the Base of the Planter

The base of the wood log planter should be equally covered with a layer of activated charcoal. Most garden centres sell activated charcoal, which aids with air filtering. This drainage layer assists in preventing root and log rot caused by too much water remaining in the soil.

Plant Your Succulents

Transfer the succulents to their new location in the wood log planter by removing them from their plastic containers. To give the planter visual interest and dimension, we selected succulents in a range of textures, heights, colours, and widths. When purchasing succulents from your neighbourhood garden centre, decide and prepare the appearance you want to achieve.

Add Soil

Add extra dirt around the plants so they won’t move once all of your succulents have been placed in their ideal spots. After carefully patting the earth around the plant with your hands, water the succulents. Because it offers succulent plants excellent soil structure and drainage, we utilised cactus mix potting soil.

Additionally, it’s crucial to keep in mind that succulents don’t thrive in soggy soil, so avoid overwatering your plant. Never water the succulent when the soil is damp or moist; just water it when the earth is dry. And if you’re concerned about overwatering your plant, fill the base of your planter with stones or gravel to allow for drainage (like mentioned in step 5).

Finishing Up Your Log Planter

This succulent log planter can be given as a present, but construct one for yourself as well. They look fantastic as the focal point of a patio table or as window sill decor. Check out these 14 succulent decorating ideas for your home right away!

What is the ideal growing medium for succulents?

Every soil mixture contains both organic and mineral components. Mineral matter, such as clay, silt, and sand, support soil drainage, whereas organic matter, such as humus and decomposing plant tissue, serves to retain moisture in the soil and give nutrients to the plant.

Because succulents can withstand drought and don’t require constant watering, their potting soil should be permeable, well-draining, and contain less organic matter than typical indoor soil mixtures. Ideal soil is a loose, granular mixture with a good amount of sand and perlite or pumice.

Can wood chips be used to cultivate succulents?

Mulching succulents is a topic of some debate among fans of the plant. Some people advise against mulching in areas where succulents are cultivated because they claim it makes the soil far too damp for them. Others claim that sparingly applying fertiliser is acceptable as long as the succulents are grown in raised beds or on a slope.

Mulching succulent plants in the garden is harmless. Mulching has advantages for manes. However, there is no one solution that works for everyone, and whether or not to mulch succulents might vary depending on your temperature, the position in which they are planted, and the variety of succulents.

What kinds of plants could I grow on a log?

The ecology naturally contains decayed wood. A downed tree ultimately decomposes and mixes with the soil. As they rot, logs behave as sponges, absorbing water, which makes the pulp extraordinarily soft and simple to remove. The interior of rotten logs may be easily shaped, making them ideal for use as planters for tiny gardens. Use a little log as a pretty window box or patio planter for tiny plants, or use a larger log to make an attractive annual garden. Garden planters can be made from long logs or short parts of logs.

To make a shallow well for the garden, use a garden trowel or wood chisel to scoop out the inside of the log. Leave a minimum of 4 inches of wood at both the log’s ends and bottom. The degree of rot and softness of the wood determine the type of tool needed. You might be able to use your hands to scoop out the wood pulp in some circumstances.

In small, shallow logs, plant a variety of miniature succulent plants. Succulents thrive on little logs or logs that haven’t decomposed completely enough to form a deep well since they require very little soil to survive. It is simple to achieve diversity in a little log garden because succulents come in such a wide variety of hues and textures. Remain with animals that only reach heights of a few inches, such as hen and chicks. Succulents don’t need as much water as other plant varieties do, and with less water, the log won’t continue to decompose as quickly.

Petunias, pansies, and pinks should be planted in logs with deeper wells that are 4 to 6 inches deep. Annuals have the benefit of being simple to replace when their flowers fade with new annual species. Because annuals only live for a year, if the wood rots through to the ground you won’t lose the planter like you would with perennials.

How are cactus logs planted?

Simply walk outside and explore your own backyard or the nearby woods if you ever need ideas or materials for your next creative project. The best materials for making beautiful and unique objects are available to us in nature, and they come in a variety of shapes. Even something as basic as a log can be put to use in a variety of fascinating ways. One of the things you can do with it is make a log planter, but even then there are many other creative designs to take into account. See a few of our favourites in the list below.

Because succulent plants don’t require much room for their roots, you can plant them in a variety of containers and even within a tiny log to make a lovely centrepiece. Simply slice a little opening on one side of the log will do. Create a crevice with a chisel and a hammer, fill it with cactus soil, and then place your miniature succulents within. Depending on how you want the centrepiece to appear, you can space them out or group them together. You may learn more about this straightforward project on hearthandvine.

There are a few things to think about when creating a log planter, including how far apart the plants should be from one another, the size of the potting holes, and the kind of plants you should use. The best succulents are small and can take many different forms. If you want the log to look more lush with vegetation, you can also purchase trailing succulents. You can make the holes for the plants using a power drill and spade bits, fill them with soil, and then place some moss on top to seal them and prevent a mess on the table if you intend to use the log as a centrepiece. More advice and suggestions can be found at satoridesignforliving.

Another simple way to create a planter is from a large log. You might arrange the log vertically and create a hole in the middle as opposed to laying it down horizontally and creating small nooks on either side for the plants. This technique will be made considerably simpler if you can locate a stump whose centre has already begun to decay. Clean the log and enlarge the hole if necessary, then add the plants and fill the space with dirt. Another suggestion is to paint the log’s exterior or a portion of it. The DIY Mommy website has other sources of inspiration.

There are other options besides a great log with bark on it that can make a lovely planter. Any scrap wood will do as long as it is big enough for the projects you have in mind. Sand the wood, clean it, and if necessary, perhaps flatten the bottom. The top piece can then be hollowed out with a tiny turbo to create a sort of planter that you can then fill with soil and other succulent plants. If you’re interested, there is a tutorial on YouTube that describes the entire procedure.

You’re going to need bigger tools and a bigger log if you want to take things a step further and create a very large log planter that you can maintain in your backyard. You can saw the log piece by piece while working in portions. To do this project, you’ll need a curved blade saw, a hammer drill, a set of wood chisels, a set of flat boring tools, a standard hammer, and plenty of time. Once finished, it will look pretty interesting, and you can fill it with a variety of brightly coloured flowers and plants to transform your backyard or garden. On TampaHomeBody, there is a thorough lesson that covers everything.

Additionally, you can purchase a ready-made log planter and forego the carving altogether. Although they’re not that widespread, there are some pretty lovely designs to pick from. Although it is a fake log and not actually made of wood, this one is rather attractive. Once all the succulents are added, the scene does appear quite lifelike. It has a drainage hole at the bottom and a concrete planter inside. Visit etsy to purchase it.

Made from log pieces and rope, this hanging planter is adorable. In order to protect the wood from injury, the actual plants are kept inside plastic cups that fit at the heart of the log. If you had the materials, creating something similar from scratch would be quite simple. In either case, keep the bark on since it gives the hanging planter more texture and gives it a more genuine, endearing appearance. To learn more, see this lovely product’s etsy listing.