How To Make A Succulent Chair

This project is for you if your yard has a pile of logs that you need for firewood or other purposes. Succulents or other small plants thrive in this shallow wood log planter, which also makes a striking outdoor display. It is constructed out of a genuine wooden log and was carved out using a drill press, hole saw, and chisel. The best part is that this project can be completed in an afternoon or less for less than $40, making it one of our favorite wood log crafts.

How to hollow out a log

Choose a log that you like to start with. We picked a log with some character, some moss, and some discolouration. The fact that it is dry and not moist in the middle is crucial in this situation. Then, there are numerous techniques from which to choose in order to hollow out the wood log. There are two methods you can pick from: using a chainsaw to cut out the center or drilling holes with a Forstner bit and then using a chisel to remove the edges. However, because we used a hardwood, we decided to use a 3-in. diameter hole saw in a drill press to carve out the center of our log planter.

Stabilize the Wood Log

Locate the log’s most stable position, then fasten the base side to a board. The length and width of this wood board should be slightly larger than the log. The board should then be fastened to the log using long screws. In order for your hole saw cuts to be consistently parallel across the wood log, it is crucial to position the log further back on the wood board so that it may ride against the drill press fence. However, provide enough space so the log won’t be pressing up against the fence, peeling the bark off in the process. When cutting through the log with a hole saw and drill press, the board on the log will help support the log.

Cut Into the Wood Log

It’s a good idea to approximately mark the area where the opening will be before you start cutting into the log. We calculated that the opening should contain two inches of bark on either side. Clamp the log firmly to the drill press table so that you can begin carving the wood. We sliced into the timber with a 3-in. diameter hole saw in a drill press. To get the length of the aperture you want for the log planter, make a series of overlapping cuts with the hole saw as deep as it will go. We’ll need to make a second pass after roughly chiseling out this top layer of hole saw cuts because the maximum depth for our hole saw was 1-1/2 in. and the necessary depth for the planter aperture is 3 in.

Carve Out Planter Opening

When the hole saw has finished its work, use a chisel and a mallet or hammer to remove the cuts. The most time-consuming step is rounding the corners, but since the log planter will be stuffed with soil and succulents nonetheless, it doesn’t have to be flawless. Avoiding chipping off the bark is the hardest issue here.

Add Charcoal to the Base of the Planter

The base of the wood log planter should be equally covered with a layer of activated charcoal. Most garden centers sell activated charcoal, which aids with air filtering. This drainage layer assists in preventing root and log rot caused by too much water remaining in the soil.

Plant Your Succulents

Transfer the succulents to their new location in the wood log planter by removing them from their plastic containers. To give the planter visual interest and dimension, we selected succulents in a range of textures, heights, colors, and widths. When purchasing succulents from your neighborhood garden center, decide and prepare the appearance you want to achieve.

Add Soil

Add extra dirt around the plants so they won’t move once all of your succulents have been placed in their ideal spots. After carefully patting the earth around the plant with your hands, water the succulents. Because it offers succulent plants excellent soil structure and drainage, we utilized cactus mix potting soil.

Additionally, it’s crucial to keep in mind that succulents don’t thrive in soggy soil, so avoid overwatering your plant. Never water the succulent when the soil is damp or moist; just water it when the earth is dry. And if you’re concerned about overwatering your plant, fill the base of your planter with stones or gravel to allow for drainage (like mentioned in step 5).

Finishing Up Your Log Planter

This succulent log planter can be given as a present, but construct one for yourself as well. They look fantastic as the focal point of a patio table or as window sill decor. Check out these 14 succulent decorating ideas for your home right away!

A planter chair is what?

Form and function come together flawlessly and harmoniously, as with all successful designs.

The low recliner’s back and seat are caned together in a single piece. A cooling effect is produced by the cane work, which is necessary for survival in the humid and hot tropical climate. Each arm is made out of a flat plank with a rounded end that is attached to a nearly identical plank that rotates outward from the bottom into a footrest, creating a platform to rest one’s legs on, using a flat headed dowel or occasionally an attractive brass pin.

The defining characteristics of the planter’s chair are its sloping back and flat arms.

GROWING POPULARITY

The male-dominated environments of the plantations and camps were the only ones to employ planter’s chairs at first. However, by the late nineteenth century, they had solidified themselves as necessities for every British colonial home, primarily for usage on the veranda. It is now a classic and the pinnacle of fashionable colonial architecture. Perfect for people looking for an attractive colonial interior design.

We are constantly looking for these beautiful chairs to add to our collection of colonial furniture, and we have some fantastic examples of them in our shop and online.

Here you may see our collection of colonial chairs.

How are indoor succulent arrangements made?

The advantages of indoor plants are endless.

They increase mood, air quality, and even focus and concentration. Succulents are among the simplest and most adaptable houseplants to include into your decor, and making your own indoor succulent garden is a wonderful way to do it.

You may make your own arrangement of lush and beautiful succulents in just a few easy steps.

  • Select a Container The versatility of indoor succulent gardens is one of their most beautiful features. Succulents may be grown in a variety of sizes and shapes, thus almost any container can be used as a succulent planter. Succulents don’t require a deep container to support their roots because of their slow growth, therefore even the most unusual container can be used as a planter. Wide, shallow bowls or pots are popular, but you may also construct your own garden out of a wine glass, a wooden trough, a mug, a shadow box, an old bucket, a candle holder, or even half of a huge shell.
  • Ensure drainage It’s crucial that your container has adequate drainage because succulents don’t want their roots to be damp. If at all possible, the container’s bottom should be pierced with a hole, but you can also ensure proper drainage by placing 1-2 inches of gravel in the pot’s base. To prevent soil from spilling out of a hole, cover it with a small piece of screening or a scrap of newspaper.
  • Fill in the Base With a succulent-friendly soil, like a cactus and succulent potting mix with plenty of drainage, fill in the base of your pot or planting container. Sand and vermiculite or other similar minerals can be added to standard potting soil to enhance drainage and make it suitable for a succulent garden.
  • Decide on Your Plants To give the layout considerable visual interest, choose plants with a variety of forms, colors, and textures for your succulent garden. However, make sure that all of the plants require a similar amount of care so that they may coexist in harmony. Because they grow slowly, plants don’t mind being packed closely together, so take your time positioning them around the pot. A trailing plant might look lovely next to the edge of the pot, or you might choose to place smaller plants all around a larger specimen.
  • Complete the Soil After placing the plants in their respective locations in your garden pot, add more dirt and lightly compact it around each plant. However, avoid planting the plants too deeply or burying them, since this could lead to root rot. A top dressing layer of gravel, sand, glass marbles, sea glass, or crushed shells can be a lovely method to tie the garden together. Top off the planter with a decorative material if desired.
  • Attach extras Accessorizing succulent gardens can be enjoyable, and you could wish to use miniature props to transform your indoor garden into a fairy world. Other ideas include inserting a larger “boulder” or huge seashell into the arrangement or adding moss as a final touch around the plants.
  • Sprout the Garden Following planting, sprinkle the garden gently with a spray bottle to water it, being careful not to overwater the plants. Overwatering succulents can cause them to decay, therefore it is preferable to let them dry out a bit rather than keep them damp. When they receive fresh water, they will recover if they are dry and will start to shrivel or wrinkle.
  • Lie back and enjoy! Even inside, full sun or a location where they will receive many hours of good sunshine each day are optimal for succulent gardens. However, stay away from placing the garden close to a heating or cooling vent that could cause temperature extremes. On a kitchen table, the corner of a desk, or a mantelpiece, a succulent garden can look beautiful. You may design a succulent garden to be the ideal match everywhere you want to add a touch of greenery to your home’s decor!

How is a succulent tray made?

Here are six comparatively simple steps for making your own succulent tray garden.

  • Decide on a container. Any shallow container should work.
  • Pick out some planting soil.
  • Choose your plants.
  • Plants are potted.
  • Set the container down.
  • Keep up with your garden.

What might I employ as a plant shelf?

Ideas for Diy Indoor Plant Shelves

  • Contemporary Plant Shelf. Making this sleek and contemporary plant shelf is simple and only requires standard wooden planks.
  • Plant Shelf That Hangs.
  • Planter with a ladder.
  • Simple DIY Plant Shelf
  • Solid Wood Floor Stand
  • Wheeled plant cart here!
  • Plant Shelving Made of Wood Slices
  • Perfect White Plant Shelf

Succulents may be placed within a wooden box.

In any home, succulents are a lovely addition. They not only give beauty to a room, but they also act to increase the humidity and add more oxygen while providing significant health advantages.

Of course, they require more work to maintain than other varieties of houseplants, even though you can’t just leave them alone. That is a huge benefit if, like me, you have a busy schedule.

I recently made the decision to expand my collection of succulents. In the past, I’ve used ceramic planters, but because I enjoy arts and crafts, I thought about constructing my own wooden planter box.

The outcomes were astounding! The DIY succulent planter was enjoyable to construct, reasonably priced, and, in my opinion, extremely fashionable. I’ll walk you through how to make your own DIY succulent planter if you just follow the steps below.

How are succulent logs watered?

Keep the soil as moist as a sponge that has been wrung out. It should be enough to water once a week in the summer and once a month in the winter. To fully immerse the roots and remove salts, water. Allow the soil to almost dry out between waterings.

Most succulents won’t be harmed by an unintentional overwatering in warm, dry weather if the soil is quick-draining.

It’s not water you need to worry about, it’s rot

The risk of rotting roots increases when they receive more water than they can tolerate. Rot develops from the plant’s roots up towards its essential center. While this darkens the tissues, the only visible symptom of rot is frequently the loss of leaves. It’s too late by that point.

This haworthia was in a non-draining container, which I had forgotten. It was OK for more than a year till I carelessly drenched it.

More water is stored in the tissues of rotund succulents or plants with fleshier leaves, which reduces the requirement for water at the roots (or can tolerate). For instance, cacti typically have a lower tolerance for overwatering than succulents with smooth leaves, like echeverias.

The need for quickly draining soil increases as the risk of rot increases. If a delicate succulent is in the ground or a pot, add pumice to the soil to soak up extra moisture.