How To Grow Succulent From A Leaf

In the spring and summer, when leaves and stems are ready for active growth, it is simplest to propagate succulent leaves and cuttings. Most common succulents can be multiplied successfully from individual leaves or stem fragments.

  • For succulents with fleshy leaves, like jade plants or echeveria and sempervivum rosettes, leaf propagation works well. The leaf must remain intact for the root to take. To loosen the leaf, gently bounce it back and forth while holding it between your forefinger and thumb. After that, carefully separate the leaf from the parent plant, keeping the base in tact.
  • Succulents with distinct stems, including stacked crassulas and spreading or erect sedums, respond well to stem cuttings. Cutting succulents is analogous to propagating soft-stemmed plants. To cut stem tips, use a sharp knife, or take an entire stem to make many starts. Each cutting should be 2 to 3 inches long and have multiple leaves. Only the top two leaves should be kept.

What You’ll Need:

  • slicing shears
  • gardening mitts (for handling spiny varieties)
  • a little trowel
  • potting soil for cacti and succulents
  • jars with sufficient drainage holes

Remove Some Leaves or Behead

Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.

These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.

To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.

If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.

Plant

When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.

Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.

When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.

To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.

Water and Feed

It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.

Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.

How long does it take a succulent to develop from a leaf?

The time it takes to propagate a succulent varies based on the type of succulent and the method you utilize. Succulents are fairly simple to grow.

After you propagate a succulent, it often takes two to three weeks or longer for it to begin exhibiting symptoms of new growth.

A succulent won’t begin to grow right away after being propagated, though. You should have patience while your plant is propagating because it could take several weeks before any new growth appears.

The kind of succulent you are propagating and the method you use will determine how long it takes.

  • Cuttings
  • Leaves
  • Offsets
  • Seeds
  • Water

How Long Do Succulents Take To Grow From Cuttings?

Because they grow quickly, succulents are a common plant to reproduce from cuttings.

Root development and new leaf growth typically take 4 and 8 weeks, respectively, when growing succulents from stem cuttings.

It’s probably big enough to move to a new pot at this time. The original leaf changing color and dropping off is typically a sign that the new plant is prepared for potting.

The cuttings should all root fairly rapidly if kept in strong light, and once established roots have grown, they should all start producing new succulent leaves.

Depending on the size of your cutting, it may take longer or less time, but in general, you may begin harvesting baby succulent plants in around 20 weeks.

Even if some of your cuttings could take longer to grow than others, there are no problems with the propagation procedure as a result.

Due to their genetic make-up or other variables like exposure to particular elements or light, some succulents just develop more slowly than others.

Your cuttings should successfully root as long as you keep them out of direct sunshine and give them plenty of water!

How Long Does It Take To Propagate Succulents From Leaves

The amount of water provided and whether or not they are put in direct sunlight are just two of the numerous variables that will affect how long it takes for succulents to form roots.

For instance, whereas Sedum species have thin leaves and can take up to three weeks to establish roots, Aeonium species have thick leaves and form roots in one week.

When propagated from leaves, succulents typically take 1 to 3 weeks to produce roots. A succulent could need a few months to grow to the right size for repotting.

Generally speaking, as soon as the leaf has roots and the succulent is large enough, it’s typically preferable to repot.

While some leaves may quickly take root, it takes a lot longer for a rosette to develop. In certain circumstances, it is preferable to hold off on any repotting until the rosette has developed.

How Long Does It Take To Grow Succulents From Offsets

With offsets, which are miniature replicas of the main plant, succulents can reproduce swiftly and easily.

When reproduced via offsets, the time it takes for succulents to grow roots ranges from 4 to 10 weeks.

Offsets happen when a plant develops so much that its root system starts to encroach on too much area.

Now, just as you would cut a branch from any other tree, the mother plant creates an offshoot that will eventually become an individual.

Succulents are easy to propagate—all you have to do is take the offset from the mother plant. They often attach pretty simply, so this method should be straightforward.

Just be sure to give the offset a separate pot or container so that it can develop on its own.

If you want to grow more succulent plants rapidly, offset propagation offers a quick turnaround.

Simply wait until your offset has established roots, which takes, on average, four weeks, and then repot it into its own pot.

How Long Does It Take To Grow Succulents From Seeds

Dealing with succulent seeds can be challenging. The seedling takes three to six weeks to germinate, and another six months or longer for it to mature.

The method that requires the most time is seed-to-plant propagation. The process of starting the seedlings can be difficult.

It takes perseverance to grow succulents from seeds because it takes around three weeks for the first little shoot to appear.

However, there may still be a long waiting period until they reach adulthood.

The type of succulents you are propagating, the growing environment, and whether you are utilizing hydroponic or conventional techniques all have an impact on how long it takes to cultivate succulents from seed.

Although it takes many months for the seed to germinate and grow into a full plant, the process is often gradual.

How Long Does It Take To Propagate Succulents in Water

Succulent cuttings that are reproduced in water require around two weeks to establish roots and are then prepared for soil transplantation.

When a succulent’s roots begin to grow after being propagated in water, it should be placed in soil.

It will produce more leaves rather than a root system if the succulent is not transplanted, which will make it more challenging for the plant to take nutrients from its surroundings.

When you notice the roots forming, that’s a good sign that the succulent plant is ready to be rooted in the ground.

Until they can be planted permanently, succulents that are propagated in water do best when placed outside on a sunny patio or porch.

It is significant to note that each succulent’s propagation period will vary according on its growth environment, cutting material, quantity of leaves, and water quality.

Can you simply bury a succulent leaf in the ground?

Fill a shallow tray with succulent soil (I like to add in some perlite or pumice) and lay the callused leaves on top to propagate your succulent leaves directly in or on soil.

They can also be planted in the ground with the calloused end down. Simply put, this wouldn’t allow you to observe the roots develop.

Water infrequently or not at all until roots begin to grow. The leaves will almost always rot if there is too much water at this time.

I spray a small amount of water just in front of the leaves after placing them on top of the soil. Just enough moisture to make the roots feel comfortable.

When roots or young succulents begin to emerge, spray the leaf cuttings to hydrate the roots. Avoid getting the actual leaves wet. To prevent the roots from drying out, repeat this procedure every few days or so.

Succulent cuttings should be kept in strong light, but until the new plants are more established, direct sun should be avoided.

Transfer them now into their individual pots. Make sure not to overly damage the roots. Keep the young succulents above the dirt and merely cover the roots with soil.

Avoid plucking up the leaves repeatedly to inspect their roots! Although it’s tempting, try to restrain yourself. The young roots can be damaged and stressed out if they are disturbed. The roots will frequently wilt and shrivel up as a result.

How can you root succulents the quickest?

So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.

Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.

Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.

Always check that the stem cuttings are a respectable size for the plant’s typical size.

According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.

Gather Your Succulents To Plant

For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.

Prepare your succulents for planting.

The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.

After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.

Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.

Mix your soil.

If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.

To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.

Plant!

We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.

Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.

Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.

Admire and Show Off Your Work!

Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!