How To Build A Vertical Succulent Garden

It’s critical to understand how wall gardening differs from regular gardening in order to grow plants successfully. Although you are doing it, I never considered gardening in pots or on the ground to be horizontal gardening. Although there are variances in slope, traditional gardening has typically been horizontal. Succulent plants are frequently found growing on cliffs, clinging to any soil they can find support in or growing in the cracks between rocks or on the brink of cliffs. They are a wonderful choice for vertical gardening due to their capacity to survive on little soil.

It is vital to choose the right kind of container for the plants being used and the structure the containers are being grown on in order to handle plants growing on a wall. I’ve decided to use two different types of containers for my vertical succulent planting. The first is a frame I created in the initial part of the 1980s. With a wire mesh front, the frame is constructed similarly to a picture frame.

This frame is intended for minor applications when each frame is not constructed to be larger than approximately 18 x 24. The frame gets uncomfortable and requires significant adjustment as you go over that size to prevent problems like soil droop. I’ve used this style of frame most frequently in the sizes 6×12, 12×12, 12×18, and 18×24. Each of these is roughly two depths. The challenge of elegantly filling a bigger wall space can be overcome by hanging a collection of these frames together. These low-tech frames lack watering systems, therefore in order to flatten each frame for watering, it is necessary to remove them from the wall or hang them on a hinge system. The frames can be altered to accommodate a drip system, especially given the variety of drip materials readily accessible today.

The other technique I employ is a 19.5×19.5×2.5 polycarbonate panel made specifically for vertical planting. This is a high-tech device that can be scaled to any desired size and is intended to receive drip. There are 45 slanted pockets on each panel, allowing water to flow from one pocket to the next. This design foresees some of the problems with large-scale vertical gardening. Uniform watering, soil slump, ease of mounting, and simplicity of removal are a few of the main problems.

When gardening with each of these categories of frames or systems, there are some contrasts and some parallels. A description of each system and how to utilize it, from planting through hanging and care, is provided below.

What types of succulents work best for vertical gardens?

Four succulents that are ideal for vertical gardens

  • Hortum sempervivum.
  • Derenbergia echeveria
  • the arborescent crassula
  • Sedum tinctorius.

How deep should a wall planter for succulents be?

In a straightforward wooden box with a depth of about two inches, numerous vertical succulent gardens are cultivated (5 cm.). The ideal box size should not exceed 18 inches by 24 inches (46 x 61 cm.). When hanging on a wall, larger sizes have a tendency to get out of control and lose soil or even plants.

Succulents may establish themselves in barely an inch (2.5 cm) of soil since their roots are typically shallow. To promote root growth, use rooting hormone or even a sprinkling of cinnamon. Several weeks should pass before watering.

Include a wire screen in the box to create a vertical garden from cuttings. This aids in keeping the soil and the plants in place. Push treated cuttings through the holes after working in the appropriate quick-draining soil and give them time to take root. Then simply hang it on the wall.

Once established, roots hold the soil in place. Give roots two to three months to establish. They should adjust to how much sun they will be exposed to while hanging during this period. Once vertical, the box can be mounted to a wall without the dirt spilling out. Combine numerous boxes to cover the wall completely or at your desired level.

To water the boxes, remove them. Although they require watering less frequently than conventional plants, succulents nevertheless require it occasionally. When it’s time to water, the bottom leaves will wrinkle.

How often should a succulent wall be watered?

To thrive indoors, succulents require lots of light that isn’t from the scorching, direct sun. Some thrive indoors more than others. In light of this, how frequently you water them depends on how much light they receive and how warm your home is.

During the summer, I give my indoor succulent plants around every two weeks of watering. Every three to four weeks during the colder, darker winter months. They receive less watering than my outdoor succulent plants, and that is fair.

My epiphytes, including the Christmas Cactus, Dancing Bones, and Epiphyllums, receive weekly watering during the summer and biweekly throughout the winter. Because they are indigenous to the tropics and subtropics, these are sprayed down in the kitchen sink. I don’t mist or spray any of my other succulents.

It’s important to remember that less is more when it comes to watering indoor succulents. As a general rule, it will be every 7–14 days during the summer and every 3–4 weeks during the winter. You should thoroughly water them and wait for the soil to dry up before watering them again.

Things to Consider When Watering Succulents

Sunlight is more frequent the more (just know that fleshy succulents will burn in hot, direct sun).

Less frequently if there isn’t a drain hole. water with caution. Here’s how to grow succulents in pots without drain holes and how to water them. Succulents are frequently grown in terrariums or small glass containers. Once more, be mindful of the frequency and amount of watering.

Think about the pot design. Terra cotta and unglazed clay are porous, allowing the roots to breathe. It can dry out more frequently. Succulents in plastic and glazed pots that aren’t porous (like ceramics) could need watering less frequently.

I’ve discovered that succulents like String of Pearls, String of Bananas, and Ruby Necklace require more frequent watering than succulents like Echvererias, Paddle Plants, Aloe Vera, and the like, which can go longer between waterings.

More frequent watering is required for succulents growing on driftwood, like as those at Roger’s Gardens.

Good Things to Know About Watering Succulents

Succulents don’t require any unique watering procedures. I would only recommend watering the soil and not the foliage.

Never have I irrigated my succulent plants with distilled water. Other plants are prone to the salts and are capable of tipping, but I haven’t discovered that to be the case with fleshies.

Don’t “Splat and run. Succulents prefer to receive thorough watering less frequently than spotty watering.

Avoid overwatering your succulents since root rot is quite likely to occur. Their succulent leaves, stems, and roots serve as water reservoirs.

Together with the aforementioned, lower them into a saucer of water and allow them to sit. The soil mixture will remain far too wet.

You might need to grow your succulents under cover, like a veranda, if you live in a rainy region. They “mush out quickly!

Succulents will do considerably better if you set your irrigation system to drip rather than spray, if you have one.

Pay attention to the weather and the water. For instance, two years ago, the winter was warm and sunny here in Tucson, so I watered more frequently. Since it was much colder last winter, I watered less frequently.

A heavy or dense soil mixture is not ideal for succulents. To avoid overwatering, it is advisable to grow succulents in a light mix. If you want to make your own succulent and cactus mix, check out my favorite recipe below.

Or, here are a few internet retailers where you can buy succulent and cactus mix: Hoffman’s (more affordable if you have a lot of succulents, but you might need to add pumice or perlite), Bonsai Jack (extremely gritty; perfect for those prone to overwatering! ), or Superfly Bonsai (another fast draining 1 like Bonsai Jack which is great for indoor succulents).

There is a difference between too much and too little water for all plants, especially houseplants. Your succulent is not getting enough water if the leaves and stems are yellow, withered, and appear dried out. It’s overwatered if the leaves and stems are mushy and brown. Succulents occasionally have lower leaves that dry out, but this is typical because it’s how they grow.

How can I keep my vertical garden’s soil moist?

To provide the necessary drainage, drill drainage holes in the bottom side of the planter box. Milorganite should be added, followed by potting mix, and the opening should be covered with landscape fabric fastened to the frame. The plants and soil are kept in place by the taut fabric cover.

How are succulent walls watered?

Succulents are drought-tolerant plants that thrive without water, as you probably already know. This does not imply that you should disregard your living wall. Consider the following maintenance advice:

  • Before you water your plants, let the soil dry. Depending on the type and specific requirements of the succulents, allow seven to ten days to elapse between waterings;
  • When you need to water the plants, take the frame off the wall. Before hanging the picture back up on the wall, set the frame down on a flat surface, water the succulents, and allow the dirt to drain.
  • Mist the succulents occasionally if you don’t want to take the hefty succulent wall art down.

Succulents planted in chicken wire: what should I do?

Succulent plants are the perfect choice for a hanging basket since they have thick, meaty leaves and stalks that can hold water. You may make a circular display of various plants that require less watering than typical plants and flowers by hanging the basket succulents from chicken wire. A tree branch, pergola beam, or the top of an arbor all make beautiful hanging locations for this spherical succulent hanging planter.

Put an 8-inch flower ball and the contents of a 100-cubic-inch bag of sphagnum moss in a pail of water. Let the moss and foam soak for 20 minutes under a brick-covered ball to keep the foam submerged.

Using a tape measure and wire snips, measure and cut a piece of chicken wire that is 8 by 8 inches. To attach the chicken wire to the planting basket, bend the free ends of one edge over the edges of an 8-inch wire basket.

Sphagnum moss that has been moistened is used to line the wire planting basket. Then, cover the moss with a 1-inch layer of cactus soil, pressing the soil firmly into the moss. Put the basket with the flowered foam ball inside. Wet sphagnum moss and cactus soil should be spread over the upper half of the foam ball. With your hands, bend the chicken wire over the foam ball. Use wire snips to remove any extra chicken wire.

To a depth of 3 inches, insert a pencil into the foam ball through a slit in the chicken wire. Put a succulent plant’s roots in the foam. Continue filling the hanging ball with succulents until it is entirely covered in greenery.

Wrap a number of the free ends of the chicken wire tightly around one metal chain, measuring 12 inches in length, and attach it to the top of the ball. Hang the succulent basket by attaching a chain over a hook that has been attached to the ceiling, a tree branch, a pergola beam, or the top of an arbor.