Cuttings can be grown in a temporary pot while they develop roots, or you can just plant them in a permanent container. In either case, you’ll need a pot with a drainage hole that’s big enough to give each cutting 2 to 3 inches of space.
To shield your succulents from standing water and root rot, fill the container with a grittier, well-draining soil. Cactus/succulent potting soil is typically available at garden centers. Alternatively, you can create your own by mixing 3 parts potting soil with 2 parts coarse, salt-free sand and 1 part perlite or pumice.
Plant the Cuttings
Insert the cut end of a stem 1 to 2 inches into the ground. If the succulent has leaves, you might need to remove a few of them to reveal the stem’s base. The lowest leaves shouldn’t contact the soil; they should rest just above it. To help the cutting stand straight, softly compact the dirt around it.
Remove any necessary leaves from stemmed succulents to expose 1 to 2 inches of stem for planting.
Pick the Right Location
Choose an area with enough of airflow, bright indirect light (not direct outdoor sun), and succulents that are still young. Cuttings require sunshine to develop new roots, but direct sunlight might cause them to quickly dry up. On indoor succulents, good airflow helps avoid gnat and mealy insect infestations.
Water
Cuttings require constant hydration until they can form roots, unlike mature succulents. Water the soil just enough to prevent it from drying up, but not too much that there is standing water. Actual frequency varies depending on humidity and temperature but is often 2-4 times each week.
Care for Rooted Succulents
A very slight pull will reveal whether a cutting has roots after 4-6 weeks. Change to deeper, less frequent watering for succulents with roots. Water just once the soil is completely dry, which takes about 2-4 times each month. If necessary, repot the succulent and relocate it gradually to the right lighting. Don’t increase light exposure for 1-2 weeks to give the plant time to adjust. Maintain your succulent’s care, and in the upcoming months, keep an eye out for above-ground development.
When growing succulents, how frequently should they be watered?
Succulents may be multiplied, giving you more of what you love. In order to share succulents with friends or because your plants have grown lanky and unsightly, you may need to propagate succulents. Whatever your motivations, we have a tried-and-true method for propagating succulents successfully.
Easy Steps for Propagating a Succulent by Leaf Cutting
1. Cut the desired number of leaves off the stem of the succulent you want to multiply.
- Where the leaf meets the succulent stem, make a precise snap. Your propagation will go more quickly and easily as a result.
- For propagation, take many leaf cuttings (see #5).
2. Allow the succulent leaf’s broken end to callus over, mend, and/or dry out.
- While a week is a fantastic amount of time, you can get away with 2-3 days for small succulent leaves and 4-5 days for larger succulent leaves while you wait for the leaves to heal.
- The succulent leaves you want to multiply should be placed on a sunny window sill to dry. The sun’s rays expose the leaves, strengthening them with nutrients as well.
- When natural sunshine is unavailable, LED grow lights are a choice.
3. Place a succulent leaf directly on the soil in a container or on a tray of soil.
- You should touch the earth with the healed portion of the leaf you are propagating, but not bury it deeply. From there, the newly propagated succulent will grow, and in order to survive, it requires light and space to breathe.
- Although it would take a lot longer to spread, you could let the leaf develop without soil.
4. Provide water and light to your succulent leaf cuttings for successful propagation.
- Depending on the temperature and humidity in your home, water succulent leaf cuttings anywhere between two and four times per week. But don’t overwater. While keeping the soil from drying out, soil should be moist but not to the point of having any standing water.
- It’s ideal to have direct, bright light. Your leaf cuttings may become scorched by too much direct sunlight.
5. Produce several leaves.
- You’ll probably experience some casualties when propagating succulents. You have a better chance of successfully growing succulents if you follow the procedures of propagation with numerous leaf cuttings.
- Place a number of leaf cuttings on a tray or large pot filled with potting soil that is lightweight. Here, you can immediately see which leaf cuttings will begin to develop roots and young succulents and are good candidates for propagation and which leaves will begin to shrivel and turn black, making them unsuitable.
6. Be patient and give your leaf cuttings enough time to grow roots, produce offspring, and reproduce.
- Please take note that leaf cuttings that produce babies but no roots are preferable to leaf cuttings that produce babies but no roots.
- You can sigh with relief when you notice that the young succulents or pups are growing. When the pups or babies appear, you can tell that they are able to produce their own food through photosynthesis as well as their own leaf systems. A leaf cutting that only grows roots may never give birth to offspring or may take a very long time to do so.
- You can always pinch or clip off the mother plant leaf once the babies/pups have formed.
7. Plant your just multiplied succulents in pots.
- Allow your babies or puppies to establish strong roots so that you can repot them into any container you want. If you propagated them in your chosen pot, let them there to continue growing.
- While propagated succulents are still in their adolescent years, keep providing them with indirect strong light. Direct sunlight will be too harsh.
- Give your new succulents a nice soak once every two weeks to water them. Don’t overwater once more. Just keep in mind that succulents store water in their leaves and stems, and that too much water around their roots will result in death by root rot.
- Remove the leaf from the mother plant that was used to propagate the plant, if you haven’t done so before. It has probably already started to shrivel up. The mother leaf remnants will ultimately dry out and fall off if you cut it close to the new plant.
*Special remark Some succulents, such as hoya and kalanchoe, cannot be propagated via leaf cuttings but can instead be done using alternative techniques, such as stem cutting. Later, we’ll talk about those.
Folks, that’s all she wrote! Your succulents that you propagated should be well on their way to developing into mature plants. Good fortune!
Take the Cutting
Choose a suitable location on your succulent to make the cut. Make a quick, even cut through the succulent’s stem with your pruning shears to separate a cutting. Make sure that there is around 1 inch of stem exposed on the cutting before planting. The bottom leaves of the cutting might need to be removed for this.
Let the Cutting Callous
It is not possible to immediately put the cutting in the ground after it has been taken. Allow the “damaged” stem of the cutting to callous over for 24 hours by setting the cutting aside in a dry place. The stem should be healed and not seem to be “wet” in any regions after 24 hours. It’s now time to plant the cutting.
Plant the Cutting
Put a succulent mix or well-draining soil in a small terracotta or plastic planter. Make a tiny hole in the middle of the soil, and after placing the succulent cutting’s stem there carefully, firm the earth up around it. To prevent rot, make sure the cutting’s lowest leaf is perched just above the surrounding soil.
After planting, avoid watering the cutting. Give the newly planted succulent cutting two or three weeks in a spot with bright, indirect sun.
Begin Watering Once Roots Sprout
It’s crucial to hold off on watering a fresh succulent cutting until the roots have formed, unlike when propagating other plants. Since succulents don’t need much water to begin with, watering a cutting before it has roots might cause the cutting to decompose under the soil very rapidly. Succulent cuttings may go quite a while without water, so don’t worry!
Give the cutting’s top a little push to check for roots after letting it sit for two to three weeks. If there is any resistance, the cutting can now be watered because the roots have started to form. Once the cutting has grown roots, it might need to be watered more frequently than usual succulents until it becomes established. Make sure the top inch of the soil dries out between waterings to prevent overwatering.
Patience, Patience, Patience!
Be patient while you take care of your new plant because succulent cuttings grow slowly. But after a few months after planting, you should start to see fresh growth.
Growing succulent cuttings can be gradually put back into stronger lighting as they become older, eventually reaching the full sun conditions that most succulents enjoy. Remember that succulent cuttings are susceptible to death from excessive affection. Once the soil dries out, they simply require light watering because they thrive on neglect.
How frequently should you sprinkle cuttings of succulents?
Because you probably already own one or many succulents, for many people, propagating them can be the simplest method to get started.
If a succulent is starting to get a little leggy, which means the succulent starts to grow long and the leaves become widely separated, remove the lower leaves. Make sure to completely separate the leaf from the stalk. It won’t establish new roots if you rip it.
The only thing left is a succulent perched atop a lengthy stem. To quickly get the succulent to root again, make a cut between the base of the succulent and the stem’s midpoint.
Then, it’s crucial that you allow the ends to callus over and dry out. Your cuttings may rot and perish if you plant them straight in the soil because they will absorb too much moisture. To allow ends to dry, Tiger advises finding a shaded, dry area on the patio or even indoors. Some people want to expose them to the sun, but he claims that doing so will just bake them. Be tolerant. This procedure can take a few days to more than a week.
When the cuttings are dry, set them on top of cactus or succulent soil that drains well and plant them in a position that gets a lot of indirect light. Only water if the leaves seem particularly dry.
Several weeks later, young plants begin to emerge. Using a spray bottle, spritz the plants once daily, being cautious not to drench the soil.
The leaf will ultimately fall off naturally, at which point you can pot up the young succulent.
How long does it take a cutting of a succulent to take root?
Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- For leaves, insert the base at an anglebarely below the soil line. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- For stem cuttings, insert the bottom half of the stem so the potting mix covers at least two bare nodes.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.