Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
How long does it take for succulents to root in water?
It is strongly advised to propagate your cuttings in water in a glass jar or another transparent container because doing so will allow you to see the growth of your plant and will also allow light to pass through.
Arrange it.
Once the cutting callus has healed, add water to the jar and place the object inside. While some opt to immerse it in water, we recommend that the stem and leaves remain dry to reduce the risk of rotting.
We advise covering the jar with plastic wrap and making a hole in it so you may insert the stem if the succulent cutting is too small. By doing this, you’ll be able to balance your cutting on the jar’s rim and make sure that only the stem’s bottom touches the liquid.  
After submerging the cutting, put the jar in a sunny spot or window and be patient while waiting for new roots to grow.
Grow period.
The time it takes for roots to emerge can typically range from 2 to 6 weeks, depending on your habitat and climate. It is advised that you periodically check the jar to make sure the water hasn’t dried up in order to avoid delays.
Gather Your Succulents To Plant
For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.
Prepare your succulents for planting.
The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.
After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.
Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.
Mix your soil.
If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.
To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.
Plant!
We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.
Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.
Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.
Admire and Show Off Your Work!
Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!
How long do cuttings of succulent stems take to take root?
You can begin watering your succulent and cactus cuttings once the cut end has started to scab over. While mature succulents and cacti don’t require much watering, leaves and cuttings that you are trying to propagate do. They must be frequently watered without being overwatered.
Your succulent or cactus cuttings can be planted in a pot that drains well by burying the cut end, which is the rooting end, in the dirt. Make sure to remove any leaves that are lower on the stem if you are planting a succulent cutting. Leaves shouldn’t be buried, please. You may keep the soil moist after planting your cuttings without overwatering.
Laying your cuttings flat on the earth, with the cut end not contacting the soil, is another approach to help them begin to take root. After that, just water the soil to maintain its moisture and wait for your succulent or cactus cuttings to begin roots. This is a fantastic alternative if your clippings are weak.
You should try to put a succulent in the ground after you have cuttings rather than just leaves. It only has to be planted and watered for it to begin producing roots; another plant does not need to be grown.
Your cuttings should begin growing in two to three weeks if you keep the soil moist and take good care of them. The rate at which your roots grow will vary depending on a number of factors. Give your cuttings a little pull after two to four weeks to check if they have rooted. They are rooted if they are poking through the ground!
Why won’t my succulent root?
You recently purchased some gorgeous succulent cuttings from a nursery in your neighborhood, or even better, online with free shipping. The cuttings you purchased are incredibly lovely, and you can’t wait to see them take root, develop, and flourish just as you anticipate!
Sadly, weeks have passed and your succulent cuttings haven’t even the least bit rooted! Now that the succulent cuttings appear dried up, wrinkled, or dying, you’re probably wondering why they aren’t taking root.
Be kind to yourself because this is something that occurs frequently. Rooting succulent cuttings is a challenge for many succulent growers, especially beginners. Especially if you recently purchased these cuttings and they aren’t rooted, it might be really discouraging.
Your succulent cuttings not rooting for a variety of reasons. It can be the result of overwatering, underwatering, insufficient sunlight, a lack of nutrients, improper soil use, or improper potting.
Not to worry! By the time you finish reading this article, you’ll understand exactly why your succulent cuttings aren’t rooted and how to fix the problem.
How are succulents bare rooted?
- Fill your planter 3/4 full with commercially prepared succulent soil or your own 50/50 blend to get it ready. Make sure the planter is at least 2″ wider than the diameter of the succulent if you are relocating it to a larger container. Your succulent will have plenty of room to expand and become stable as a result.
- Remove your succulent from its present container, then gently separate the roots. To loosen the roots and remove the soil, you can “tickle” them from the bottom. Consider this phase as a pleasant stretch for the roots. They can stabilize in a larger pot and acclimate to their new soil by being spread out and lengthened. This is the ideal time to remove any dead leaves and brush away any dead roots from the plant’s base. While doing this, be careful to brush away any old or extra dirt.
- The succulent should be placed in a shallow hole dug in the fresh dirt, and the roots should then be covered with more potting soil and tightly tamped to stabilize the plant. Don’t cover any leaves or allow them sit on top of the dirt; just be sure to add enough soil to cover the plant’s base. As a result of the leaves absorbing too much moisture from the soil, this will cause them to rot.
- After the plant has stabilized, you can add colored rocks, pebbles, or sand to give your new succulent plant in a pot a unique touch. Make sure the material drains adequately if you do add something on top so that water can reach the soil underneath.
Please take note that you should wait a few days before watering newly potted succulents. The plant eventually becomes stabilized as a result of the roots spreading out in search of water as a result of the delay.
The Next Steps
It’s time to learn about the water needs of your succulents now that you’ve planted them in their new container to ensure their happiness, health, and beauty.
Succulents—can they endure in water forever?
You will need to decide how to start your new plant first. We discover that employing an offshoot, as opposed to cutting, often generates a stronger plant. It ultimately depends on your preference, however the latter is also totally feasible. You can now start growing a succulent in water.
The cutting or branch must be given time to callus as the first and most crucial phase. For a few days, keep it in a tray without food. If you don’t do this, it will collect too much moisture, which could lead to rotting.
Next, lay the cutting or branch on the rim of a water container in a location with plenty of sunlight. It is necessary for the calloused end to be barely visible above the waterline. You will observe the roots penetrating it in a few days.
That’s all there is to it! As long as you give the succulent an appropriate container, it can continue to live in the water until the roots have formed.
A succulent that has adapted to living in water will most likely perish if transplanted into soil since water roots and soil roots are significantly different from one another. You are free to experiment to your heart’s content and discover what works best for you because succulents are easy to propagate.