Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
How long do propagated succulents take to take root?
It is strongly advised to propagate your cuttings in water in a glass jar or another transparent container because doing so will allow you to see the growth of your plant and will also allow light to pass through.
Arrange it.
Once the cutting callus has healed, add water to the jar and place the object inside. While some opt to immerse it in water, we recommend that the stem and leaves remain dry to reduce the risk of rotting.
We advise covering the jar with plastic wrap and making a hole in it so you may insert the stem if the succulent cutting is too small. By doing this, you’ll be able to balance your cutting on the jar’s rim and make sure that only the stem’s bottom touches the liquid.  
After submerging the cutting, put the jar in a sunny spot or window and be patient while waiting for new roots to grow.
Grow period.
The time it takes for roots to emerge can typically range from 2 to 6 weeks, depending on your habitat and climate. It is advised that you periodically check the jar to make sure the water hasn’t dried up in order to avoid delays.
Why isn’t my succulent growing anymore?
You recently purchased some gorgeous succulent cuttings from a nursery in your neighborhood, or even better, online with free shipping. The cuttings you purchased are incredibly lovely, and you can’t wait to see them take root, develop, and flourish just as you anticipate!
Sadly, weeks have passed and your succulent cuttings haven’t even the least bit rooted! Now that the succulent cuttings appear dried up, wrinkled, or dying, you’re probably wondering why they aren’t taking root.
Be kind to yourself because this is something that occurs frequently. Rooting succulent cuttings is a challenge for many succulent growers, especially beginners. Especially if you recently purchased these cuttings and they aren’t rooted, it might be really discouraging.
Your succulent cuttings not rooting for a variety of reasons. It can be the result of overwatering, underwatering, insufficient sunlight, a lack of nutrients, improper soil use, or improper potting.
Not to worry! By the time you finish reading this article, you’ll understand exactly why your succulent cuttings aren’t rooted and how to fix the problem.
Can you put succulent cuttings directly into the ground?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- The cuttings will begin to take root in about a month, and then the tops of the cuttings will begin to grow.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
What is the propagation time?
Most plants will begin to root in 3–4 weeks, but others can take longer. The cutting is prepared for potting when the roots are at least 1-2 inches long.
Succulents—can they endure in water forever?
You will need to decide how to start your new plant first. We discover that employing an offshoot, as opposed to cutting, often generates a stronger plant. It ultimately depends on your preference, however the latter is also totally feasible. You can now start growing a succulent in water.
The cutting or branch must be given time to callus as the first and most crucial phase. For a few days, keep it in a tray without food. If you don’t do this, it will collect too much moisture, which could lead to rotting.
Next, lay the cutting or branch on the rim of a water container in a location with plenty of sunlight. It is necessary for the calloused end to be barely visible above the waterline. You will observe the roots penetrating it in a few days.
That’s all there is to it! As long as you give the succulent an appropriate container, it can continue to live in the water until the roots have formed.
A succulent that has adapted to living in water will most likely perish if transplanted into soil since water roots and soil roots are significantly different from one another. You are free to experiment to your heart’s content and discover what works best for you because succulents are easy to propagate.
How frequently should you water succulents in propagation?
Succulents may be multiplied, giving you more of what you love. In order to share succulents with friends or because your plants have grown lanky and unsightly, you may need to propagate succulents. Whatever your motivations, we have a tried-and-true method for propagating succulents successfully.
Easy Steps for Propagating a Succulent by Leaf Cutting
1. Cut the desired number of leaves off the stem of the succulent you want to multiply.
- Where the leaf meets the succulent stem, make a precise snap. Your propagation will go more quickly and easily as a result.
- For propagation, take many leaf cuttings (see #5).
2. Allow the succulent leaf’s broken end to callus over, mend, and/or dry out.
- While a week is a fantastic amount of time, you can get away with 2-3 days for small succulent leaves and 4-5 days for larger succulent leaves while you wait for the leaves to heal.
- The succulent leaves you want to multiply should be placed on a sunny window sill to dry. The sun’s rays expose the leaves, strengthening them with nutrients as well.
- When natural sunshine is unavailable, LED grow lights are a choice.
3. Place a succulent leaf directly on the soil in a container or on a tray of soil.
- You should touch the earth with the healed portion of the leaf you are propagating, but not bury it deeply. From there, the newly propagated succulent will grow, and in order to survive, it requires light and space to breathe.
- Although it would take a lot longer to spread, you could let the leaf develop without soil.
4. Provide water and light to your succulent leaf cuttings for successful propagation.
- Depending on the temperature and humidity in your home, water succulent leaf cuttings anywhere between two and four times per week. But don’t overwater. While keeping the soil from drying out, soil should be moist but not to the point of having any standing water.
- It’s ideal to have direct, bright light. Your leaf cuttings may become scorched by too much direct sunlight.
5. Produce several leaves.
- You’ll probably experience some casualties when propagating succulents. You have a better chance of successfully growing succulents if you follow the procedures of propagation with numerous leaf cuttings.
- Place a number of leaf cuttings on a tray or large pot filled with potting soil that is lightweight. Here, you can immediately see which leaf cuttings will begin to develop roots and young succulents and are good candidates for propagation and which leaves will begin to shrivel and turn black, making them unsuitable.
6. Be patient and give your leaf cuttings enough time to grow roots, produce offspring, and reproduce.
- Please take note that leaf cuttings that produce babies but no roots are preferable to leaf cuttings that produce babies but no roots.
- You can sigh with relief when you notice that the young succulents or pups are growing. When the pups or babies appear, you can tell that they are able to produce their own food through photosynthesis as well as their own leaf systems. A leaf cutting that only grows roots may never give birth to offspring or may take a very long time to do so.
- You can always pinch or clip off the mother plant leaf once the babies/pups have formed.
7. Plant your just multiplied succulents in pots.
- Allow your babies or puppies to establish strong roots so that you can repot them into any container you want. If you propagated them in your chosen pot, let them there to continue growing.
- While propagated succulents are still in their adolescent years, keep providing them with indirect strong light. Direct sunlight will be too harsh.
- Give your new succulents a nice soak once every two weeks to water them. Don’t overwater once more. Just keep in mind that succulents store water in their leaves and stems, and that too much water around their roots will result in death by root rot.
- Remove the leaf from the mother plant that was used to propagate the plant, if you haven’t done so before. It has probably already started to shrivel up. The mother leaf remnants will ultimately dry out and fall off if you cut it close to the new plant.
*Special remark Some succulents, such as hoya and kalanchoe, cannot be propagated via leaf cuttings but can instead be done using alternative techniques, such as stem cutting. Later, we’ll talk about those.
Folks, that’s all she wrote! Your succulents that you propagated should be well on their way to developing into mature plants. Good fortune!