Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
How long does it take for succulent leaves to sprout?
Taking an active, healthy leaf from a mature succulent plant and utilizing it to establish a new plant is known as “propagating with leaf cuttings.” Because the leaves of succulents with fleshy, plump leaves, like echeveria, are simple to snap off cleanly, this method of propagation works well with them.
While some leaves may simply pop off with a little tug, others could necessitate the use of a sharp knife. Take a healthy leaf from the plant’s base with clean hands or a sterile knife, making sure to remove the full, undamaged leaf.
After being removed, allow the leaf to recover for about four days in a warm, well-lit place so that the wound can callus over. When the leaf has calloused, prepare a fresh planter with soil, fill it with water, and set the callused leaf on top of the soil for multiplication.
When the earth is dry, spritz your leaves with a spray bottle. Keep them warm, in a room with lots of light, but out of direct sunlight. They must be kept warm and moist.
Little roots and leaves will start to emerge after around three weeks! A succulent may need a few months to grow large enough to be replanted (photos above are after about 8 weeks). When the leaf eventually gets brown and falls off, you’ll know it’s time. This indicates that the succulent no longer requires the leaf because it has consumed all of its nutrients.
Why aren’t the leaves on my succulent growing?
You recently purchased some gorgeous succulent cuttings from a nursery in your neighborhood, or even better, online with free shipping. The cuttings you purchased are incredibly lovely, and you can’t wait to see them take root, develop, and flourish just as you anticipate!
Sadly, weeks have passed and your succulent cuttings haven’t even the least bit rooted! Now that the succulent cuttings appear dried up, wrinkled, or dying, you’re probably wondering why they aren’t taking root.
Be kind to yourself because this is something that occurs frequently. Rooting succulent cuttings is a challenge for many succulent growers, especially beginners. Especially if you recently purchased these cuttings and they aren’t rooted, it might be really discouraging.
Your succulent cuttings not rooting for a variety of reasons. It can be the result of overwatering, underwatering, insufficient sunlight, a lack of nutrients, improper soil use, or improper potting.
Not to worry! By the time you finish reading this article, you’ll understand exactly why your succulent cuttings aren’t rooted and how to fix the problem.
How is a succulent leaf rooted?
What kind of cuttings you can take from your succulent will depend on its genus and species. For instance, cuttings or leaves can be used to reproduce the majority of delicate Sedums and some Echeverias. Nevertheless, I utilize leaves for each.
Simply twist a leaf off the stem gently to remove it for propagation. Make certain that the draw is clean and leaves nothing on the stem. In fact, it’s okay to remove a small portion of the stem as well.
Make sure you get all the way down to the stem because every time I’ve broken off a leaf before the stem, it has always died. As you take the leaf off, it helps to have a clear view of the leaf’s base.
It’s a really cheap method to begin a collection of new plants, plus it’s a lot of fun to grow succulents from seed to baby plant to plant!
How to take a cutting for propagation
On the other side, you’ll need sharp scissors or pruning shears to make a cut (I use these and adore them!). Just above a leaf on the stalk, cut off a bit of the succulent.
The succulent’s top can be removed, or you can remove a fresh branch. Both will function!
Can you put succulent cuttings directly into the ground?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- The cuttings will begin to take root in about a month, and then the tops of the cuttings will begin to grow.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
Gather Your Succulents To Plant
For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.
Prepare your succulents for planting.
The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.
After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.
Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.
Mix your soil.
If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.
To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.
Plant!
We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.
Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.
Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.
Admire and Show Off Your Work!
Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!
How much time do succulents need to root in water?
It is strongly advised to propagate your cuttings in water in a glass jar or another transparent container because doing so will allow you to see the growth of your plant and will also allow light to pass through.
Arrange it.
Once the cutting callus has healed, add water to the jar and place the object inside. While some opt to immerse it in water, we recommend that the stem and leaves remain dry to reduce the risk of rotting.
We advise covering the jar with plastic wrap and making a hole in it so you may insert the stem if the succulent cutting is too small. By doing this, you’ll be able to balance your cutting on the jar’s rim and make sure that only the stem’s bottom touches the liquid.  
After submerging the cutting, put the jar in a sunny spot or window and be patient while waiting for new roots to grow.
Grow period.
The time it takes for roots to emerge can typically range from 2 to 6 weeks, depending on your habitat and climate. It is advised that you periodically check the jar to make sure the water hasn’t dried up in order to avoid delays.