As we all know, not all succulents get lanky due to inadequate sunshine. Because of the way some succulents develop, they can become lanky. Here’s how to keep your succulents from growing lanky as a result of inadequate light:
- Whether inside or outside, make sure they are getting enough sunlight. The ideal amount of daylight is between four and six hours every day.
- Succulents grown indoors are more likely to become lanky. Put them close to the house’s brightest window. If required, relocate the plant to a more light-filled area. If at all possible, provide the plant access to the outdoors. To augment the plant’s illumination requirements, think about utilizing a grow lamp.
- Ensure that no taller plants in a planter are blocking them. The planter was outdoors and receiving full sun, just like what occurred to my plant up top, however the plant was being obstructed by taller plants. When potting your plants, it’s ideal to think ahead to determine which ones will work best with which ones. But even if you don’t, the problem is easy enough to rectify. Simply remove the plant—whether it is tall, stretched, or both—from the planter and repotted it in a separate planter. Check out this post, “Revamping an Overgrown Succulent Fairy Garden,” to see how I did it.
- To ensure that every plant in the planter receives enough sunshine, turn the pot. You might need to rotate the pot occasionally to ensure that all of the plants are receiving enough sunlight, depending on where it is positioned and how the sun strikes the plants. My planter gets a lot of early sun, but because it is at an angle, the plants behind it don’t get as much light and are beginning to sag. To ensure that all the plants receive sunlight, simply rotate the pot periodically.
- Avoid overfeeding and overfertilizing your succulents. Because succulents are light feeders, overfertilizing will cause the plant to spread out and result in inferior growth. This is a result of the plant’s inability to support its own pace of growth due to its excessive rate of growth. It is advisable to use 1/4 to 1/2 strength of the fertilizer’s suggested dosage. For the majority of succulents, the active growing season is from early spring to late fall. Fertilize at this time. Avoid fertilizing in the late fall and winter when growth typically slows.
Leggy succulents can occasionally be very attractive, especially if they begin to cascade down the pot. Many succulents naturally grow in this manner, which adds to their appeal. However, there is usually a fast treatment for it and the plant will recover quickly once the issue has been resolved if your succulents are growing leggy from lack of light.
How do I make my cacti less lanky?
When cultivated in the right lighting conditions, succulents adore the sun and thrive. However, you’ve probably cultivated or observed a lanky, stretched-out succulent. In the area you have, these lanky or etiolated succulents aren’t getting the proper amount of light.
Not just succulent indoor plants experience this behavior. You may have seen how your plant stretches to reach as close to the sun as it can by bending toward it. As they extend toward the sun, succulents get taller and spread their leaves farther apart.
The compact shape of etiolated succulents won’t return, but you can give them a trim and grow additional succulents from the cuttings.
How to disassemble the plant and begin reproducing it in order to try again is demonstrated in this video by Laura from Garden Answer.
- Clear the foliage. Cut the roots and wholesome leaves from the succulent’s bottom half with pruners or by snapping them off. Get a break that is as spotless as you can to promote new growth. Get rid of your leaf if it tears. Up to a little bit after halfway up, remove leaves. To understand how to cut the stem and transplant it with the remaining rosette at the top, see to step three.
- Dry the leaves. After removal, let the leaves dry for a few days or until the raw ends have calloused.
- Replant the stem. New roots will be able to sprout if the stem is planted farther below where the leaves were removed. Simply clip the stem 1-2 inches from the plant’s base if it is too long for the pot. It’s alright if you have no stem at all. Simply bury the rosette in the ground to prevent it from falling out.
- Prepare to expand. A tray, saucer, or other container containing Espoma’s Organic Cactus mix should have dried leaves on top of it. Avoid burying leaves in the ground. Put the container in a location that will shield it from direct sunlight.
- Spray the ground until it is damp but not soaked. When the soil seems dry to the touch, rehydrate it.
- Wait. There will be new baby roots that appear in about a month.
- Replant. You can replant your propagated succulents once they have established roots. Put them on display in a recycled planter.
- The roots should be examined every six months to determine whether you need to transfer your plants to a larger pot. Espoma’s Cactus can be used to routinely feed your succulents. For optimal results, use liquid plant food.
Can you make a succulent grow taller?
The majority of succulents are graceful low-growing plants that neatly tuck into cracks in rockeries, flower beds, pots, and between pavement stones. Although succulent pruning is not typically necessary, it is a simple procedure that can be used on plants that grow long and lose the compact character that makes them so coveted. Understanding how to trim a leggy succulent can help you get the plant back to the size you want while also giving you plant material for another one of these resilient, simple plants.
When you complain that your plant is too tall, you should regulate it. This could be caused by blooms, leaves, or stalks, and the plant may end up seeming smaller or not fitting into its original location. The type of plant you are growing will determine what to do if your succulents get too tall.
Plants go through a process known as etioliation when they are grown indoors or in other low light environments. The plant is stretching upward to catch more light, which causes the stem to lengthen. Transferring the plant to a southern exposure is the straightforward answer. But that leggy party is still left after this. Fortunately, it is possible to top leggy succulent plants, which will remove the excessively tall portion and encourage the growth of new, more compact shoots.
How come my succulents are so lanky?
Almost all succulents will expand “if not given enough light, they become lanky. But more light-sensitive than other succulents are those that change color in response to stress. Their response can be swift, releasing etiolated “growth in just a couple of days. Additionally, stretching out succulents with rosette shapes like Echeveria, Graptoveria, and Graptosedum would make them appear worse from an aesthetic standpoint.
Why is my cactus growing taller?
When they don’t receive enough sunshine, succulents swell out. The succulent will first begin to turn and bend in the direction of the light source.
As it grows, the leaves will spread farther apart, making the plant taller.
The leaves are often smaller and paler in color than usual. The succulent will typically turn green or lose the strength of its original color when it is not exposed to sunshine.
This Echeveria ‘Lola’ is beginning to bend toward the light, and it isn’t quite as colorful as it was when I took the photo for the post about top dressings.
The majority of the time, this will occur when succulents are cultivated indoors, but it can also occur outside when succulents are exposed to too much shadow.
How are lanky plants fixed?
A leggy indoor plant can be pruned to foster the growth of new stems, which will help it regain its former lushness in addition to being moved into more light. Snip just above a node to remove one-third of the length of very long, lanky stems (the point where leaves grow from the stem). If your plant is already producing new shoots from the ground, trimming back gangly stems around it will give the new growth space to absorb sunlight and thrive.
Your Succulent Isn’t Getting Enough Light
All plants require light, but succulents particularly crave it. Your pal may be leggy if you don’t provide a sunny area where they can soak up the light.
Insufficient sunshine causes succulents to develop lengthy stems. They begin to turn and spread out in search of light during a process known as etiolation, which gives them a “leggy appearance with a long stem and smaller, spaced-out leaves.
It can be challenging to determine how much light your plant needs right immediately because every plant is unique. Try transferring the succulent to an area where it will receive more light if you find it starting to grow a long stem without adding more leaves. You might want to think about buying a tiny tabletop grow light if your house doesn’t have a place where the sun shines.
When ought to succulents be potted again?
Evergreen succulents have always captured my heart. Succulents are low maintenance plants that thrive in containers because to their unusual forms and thick leaves; I have a large collection of these well-liked varieties.
Repotting succulents every two years is a good general rule of thumb, if only to give them access to new, fertile soil. The beginning of a succulent’s growing season is the optimal time to repot it because it provides the plant its best chance of surviving. My gardeners, Ryan and Wilmer, took advantage of the snowy weather earlier this week to repot many succulent plants and propagate a variety of cuttings. Here are some pictures of the steps we took.
In times of drought, succulents, sometimes known as fat plants, store water in their fleshy leaves, stems, or stem-root systems. Because of their eye-catching shapes, succulents are frequently planted as attractive plants.
I needed to repot a few of the succulents in my collection either they had outgrown their pots or I wanted to relocate them into more attractive clay containers.
He stamps my name and the year the pot was produced on the reverse side. When I host big events in my home, they invariably look fantastic.
To aid in drainage, a clay shard is placed over the hole. Additionally, I like using clay pots because they permit adequate aeration and moisture to reach the plant via the sides.
We always keep the shards from broken pots; it’s a fantastic method to use those parts again.
Wilmer carefully takes a succulent from its pot without damaging any of the roots.
Wilmer then conducts a meticulous test to determine if the pot is the proper size for the plant. He picks a pot just a hair bigger than the plant’s original container.
Prills are the name for osmocote particles. A core of nutrients composed of nitrogen, phosphorus, and potassium is covered by the prill’s beige shell.
For the finest drainage, we mix equal parts of sand, perlite, and vermiculite for succulents. The correct soil mixture will also aid in promoting rapid root growth and provide young roots with quick anchoring.
Wait a few days before watering the succulents after repotting to give them time to become used to the new soil.
Wilmer shifts to the following plant. This one too need a little maintenance attention. He picked up any fallen leaves.
In order to promote new development, Wilmer lightly pruned the roots after manually loosening the root ball.
Wilmer inserted the plant into the pot after adding some Osmocote and a little amount of potting soil.
The pale blue-gray leaves of Echevaria runyonii ‘Topsy turvy’ curve upward, are prominently inversely keeled on the bottom surface, and have leaf tips that point inward toward the center of the plant.
Echeverias are among the most alluring succulents, and plant aficionados greatly respect them for their brilliant colors and lovely rosette shapes.
An aeonium is a succulent with rosette-like leaves that grows quickly. Aeonium is a varied genus that includes little or medium-sized plants, stemless or shrub-like, and plants that favor sun or shade.
Succulents should be placed on a table so that they can get enough of natural light even when the sun isn’t shining directly on their pots.
Moreover, propagation is fairly simple. Here, Ryan uses sharp pruners to cut a three to four-inch portion of stem off the mother plant.
There should be about a half-inch of stem showing. A handful of them are ready to be planted here.
Ryan provides plenty of space for the plants. There will be plenty to use in mixed urns during the summer if all of these take root and grow into succulent plants. Four to six weeks following planting, new growth should start to show, at which point each plant should be repotted independently.
Inside my main greenhouse, all of my priceless plant collections are kept on long, sliding tables. They all have such lovely looks. Which succulents are your favorites? Please share your feedback in the spaces below.
What causes my succulent to topple over?
If your succulent is not adequately watered, it may suffer harm and topple over. Waiting until the plant is practically dry and the leaves appear wrinkled is the right time to water. After that, water thoroughly until you notice water dripping from the drainage holes.
When cultivating succulents, it’s crucial to utilize pots with drainage holes. Their leaves might swell and become damaged if they are watered excessively or regularly.
If the damage has already happened, see if the stem is also compromised. If so, remove the rotten part of the plant and maintain the healthy part in a dry place. If you don’t water the plant for a week, it should recover to its previous state.
Overwatering
The succulent may suffer severe harm and eventually die if it is overwatered. The majority of succulent deaths are caused by the additional water swelling up the cell walls, which kills the plant.
Only water when the soil seems dry to the touch, which is usually once a week or so.
Underwatering
The soft and wavy leaves of a succulent that has been submerged might be used to identify it. The leaves will appear weakened and wilted, but there won’t be a noticeable change in color, unlike with overwatered foliage.
The plant can still be restored to its former state if leaves do not fall off when touched. Watering the plant won’t assist at this point if the damage is too serious; the plant will die.
If the succulent was only slightly submerged, you could save it by doing the following:
- To revitalize the plant, gradually increase the frequency of watering.
- Only making small, incremental improvements since big ones could harm the plant.
- watering from the bottom to avoid putting too much strain on the plant.
Your succulent will probably get its energy back with these remedies, and it won’t lean over anymore.