Succulents can be propagated in water, but doing so goes against the ideal growing circumstances for these plants. Start your leaves and cuttings in shallow planting trays or tiny containers packed with potting soil for the best outcomes. Succulents can be grown in individual containers without having to transplant them right away.
Follow these easy steps once planting day arrives and your leaf or stem cuttings have callused:
1. Get your planting trays or containers ready. Use a coarse, quick-draining potting mix made for succulents and cacti and gently moisten it. 2 Make planting holes with a little stick.
2. Add a little RootBoost Rooting Hormone to a serving dish. When pouring, only utilize what you’ll need and discard the remainder.
3. Cut one piece at a time. Wet the cutting stem or leaf base before dipping it into the dish of rooting hormone. Completely round the stem or leaf base. Get rid of any extra rooting powder by shaking.
4. Carefully tuck leaves or stems into the rooting powder so it doesn’t fall out. The potting mix should then be carefully pressed around the cuttings.
- Insert the base at an angle just below the soil line to accommodate leaves. Put curled leaves in an upwards-curving position. (On that side, the new tiny plant grows.)
- Insert the bottom half of the stem into the potting mix so that it covers at least two bare nodes when taking stem cuttings.
5. Wait until roots start to form before watering. Once the dirt has dried, give it a good watering before repeating the process. The majority of succulent leaf and stem cuttings should root in two to three weeks, while rooting times might vary greatly. The fastest-rooting cuttings are those from stem tips.
6. After the roots have taken hold, transplant your new succulents from trays to tiny containers. Use the same kind of potting soil as you did previously. Be careful not to disrupt young, delicate roots.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilize the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.
How long does it take a succulent leaf to grow a new succulent?
- Leaf propagation: Typically, it takes 2 weeks for roots to develop through leaf propagation. New leaves will start to form in around 8 weeks and can optionally be transplanted to a tiny container.
- Root formation typically takes 4 weeks, but it can occasionally take longer with stem proliferation.
- Offset propagation: Once the pups have developed a calloused skin, the roots typically begin to grow after 4 to 10 weeks.
- The process of propagating seeds takes the longest—cactus seeds can take anything from three weeks to a year to even begin to germinate. After that, the seedling takes a very long period to mature into a full-grown adult.
Can you simply bury a succulent leaf in the ground?
Fill a shallow tray with succulent soil (I like to add in some perlite or pumice) and lay the callused leaves on top to propagate your succulent leaves directly in or on soil.
They can also be planted in the ground with the calloused end down. Simply put, this wouldn’t allow you to observe the roots develop.
Water infrequently or not at all until roots begin to grow. The leaves will almost always rot if there is too much water at this time.
I spray a small amount of water just in front of the leaves after placing them on top of the soil. Just enough moisture to make the roots feel comfortable.
When roots or young succulents begin to emerge, spray the leaf cuttings to hydrate the roots. Avoid getting the actual leaves wet. To prevent the roots from drying out, repeat this procedure every few days or so.
Succulent cuttings should be kept in strong light, but until the new plants are more established, direct sun should be avoided.
Transfer them now into their individual pots. Make sure not to overly damage the roots. Keep the young succulents above the dirt and merely cover the roots with soil.
Avoid plucking up the leaves repeatedly to inspect their roots! Although it’s tempting, try to restrain yourself. The young roots can be damaged and stressed out if they are disturbed. The roots will frequently wilt and shrivel up as a result.
Succulents can I grow from falling leaves?
But did you know that cuttings and fallen leaves may also be used to generate new succulent plants? Indeed, you can! It’s simple. You only need to follow a few simple instructions, and after a few weeks, you will have a ton of adorable baby succulents!
Can I replant a fallen succulent leaf?
Allow your succulent’s leaves to dry for three days after they have fallen off. This gets them ready for propagation, which is the procedure for developing new succulent plants from cuttings.
How can you root succulents the quickest?
So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.
Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.
Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.
Always check that the stem cuttings are a respectable size for the plant’s typical size.
According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.
How long do succulent cuttings take to root?
The time it takes to propagate a succulent varies based on the type of succulent and the method you utilize. Succulents are fairly simple to grow.
After you propagate a succulent, it often takes two to three weeks or longer for it to begin exhibiting symptoms of new growth.
A succulent won’t begin to grow right away after being propagated, though. You should have patience while your plant is propagating because it could take several weeks before any new growth appears.
The kind of succulent you are propagating and the method you use will determine how long it takes.
- Cuttings
- Leaves
- Offsets
- Seeds
- Water
How Long Do Succulents Take To Grow From Cuttings?
Because they grow quickly, succulents are a common plant to reproduce from cuttings.
Root development and new leaf growth typically take 4 and 8 weeks, respectively, when growing succulents from stem cuttings.
It’s probably big enough to move to a new pot at this time. The original leaf changing color and dropping off is typically a sign that the new plant is prepared for potting.
The cuttings should all root fairly rapidly if kept in strong light, and once established roots have grown, they should all start producing new succulent leaves.
Depending on the size of your cutting, it may take longer or less time, but in general, you may begin harvesting baby succulent plants in around 20 weeks.
Even if some of your cuttings could take longer to grow than others, there are no problems with the propagation procedure as a result.
Due to their genetic make-up or other variables like exposure to particular elements or light, some succulents just develop more slowly than others.
Your cuttings should successfully root as long as you keep them out of direct sunshine and give them plenty of water!
How Long Does It Take To Propagate Succulents From Leaves
The amount of water provided and whether or not they are put in direct sunlight are just two of the numerous variables that will affect how long it takes for succulents to form roots.
For instance, whereas Sedum species have thin leaves and can take up to three weeks to establish roots, Aeonium species have thick leaves and form roots in one week.
When propagated from leaves, succulents typically take 1 to 3 weeks to produce roots. A succulent could need a few months to grow to the right size for repotting.
Generally speaking, as soon as the leaf has roots and the succulent is large enough, it’s typically preferable to repot.
While some leaves may quickly take root, it takes a lot longer for a rosette to develop. In certain circumstances, it is preferable to hold off on any repotting until the rosette has developed.
How Long Does It Take To Grow Succulents From Offsets
With offsets, which are miniature replicas of the main plant, succulents can reproduce swiftly and easily.
When reproduced via offsets, the time it takes for succulents to grow roots ranges from 4 to 10 weeks.
Offsets happen when a plant develops so much that its root system starts to encroach on too much area.
Now, just as you would cut a branch from any other tree, the mother plant creates an offshoot that will eventually become an individual.
Succulents are easy to propagate—all you have to do is take the offset from the mother plant. They often attach pretty simply, so this method should be straightforward.
Just be sure to give the offset a separate pot or container so that it can develop on its own.
If you want to grow more succulent plants rapidly, offset propagation offers a quick turnaround.
Simply wait until your offset has established roots, which takes, on average, four weeks, and then repot it into its own pot.
How Long Does It Take To Grow Succulents From Seeds
Dealing with succulent seeds can be challenging. The seedling takes three to six weeks to germinate, and another six months or longer for it to mature.
The method that requires the most time is seed-to-plant propagation. The process of starting the seedlings can be difficult.
It takes perseverance to grow succulents from seeds because it takes around three weeks for the first little shoot to appear.
However, there may still be a long waiting period until they reach adulthood.
The type of succulents you are propagating, the growing environment, and whether you are utilizing hydroponic or conventional techniques all have an impact on how long it takes to cultivate succulents from seed.
Although it takes many months for the seed to germinate and grow into a full plant, the process is often gradual.
How Long Does It Take To Propagate Succulents in Water
Succulent cuttings that are reproduced in water require around two weeks to establish roots and are then prepared for soil transplantation.
When a succulent’s roots begin to grow after being propagated in water, it should be placed in soil.
It will produce more leaves rather than a root system if the succulent is not transplanted, which will make it more challenging for the plant to take nutrients from its surroundings.
When you notice the roots forming, that’s a good sign that the succulent plant is ready to be rooted in the ground.
Until they can be planted permanently, succulents that are propagated in water do best when placed outside on a sunny patio or porch.
It is significant to note that each succulent’s propagation period will vary according on its growth environment, cutting material, quantity of leaves, and water quality.
Succulents can be grown in water.
Many people choose to cultivate their collection in this way since doing so really speeds up the process and increases the likelihood of success compared to growing succulents in soil.
Is it better to grow succulents in soil or water for reproduction?
Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.
Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.
According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.
I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.
According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.
The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.
As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.
The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.
The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.
I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.
I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).
Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.
I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.
The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.
I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.
The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.
Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.
Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.
Update:
Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?
A Step-by-Step Guide for How to Procreate in Water is Provided Below:
acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.
OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.
Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.
Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.
To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.
Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.
Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.
Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)
Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.
occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. In water, the cuttings will perpetually live and thrive. Every few weeks or as needed, replace the water and add fresh, clean water.
Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.
My opinions on the spread of water:
I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.
The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.
Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.
According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.