Probably the most frequent and straightforward method of propagation is stem cuttings. Stem cuttings are an effective method for multiplying many cacti. Stem cuttings from an existing plant are removed, then left to calluse and dry out. Eventually, the cuttings will begin to take root from the cut end and grow into a new plant.
Some cacti that are frequently multiplied via stem cuttings include:
- Prickly pears or opuntia
- Collapsed cactus
- Globular and pincushion cacti
How do you re-root a cactus fragment?
Large desert cactus, such as the prickly pear (Opuntia spp. ), can be rooted either indoors or outdoors in U.S. Department of Agriculture plant hardiness zones 3b through 11. Usually, smaller desert plants are rooted in flower pots. One-third to one-half of the pad or stem should be buried, bottom end down, in the potting media after making a small hole in it. Place in a warm environment with filtered light that is bright. Wait to water the plant until the roots start to form.
Can you grow cacti in water?
It’s time to get your cutting ready for planting in a pot once it has dried! Cactus propagation can potentially be done in water, just like with other houseplants, but it’s not a very usual procedure because they thrive in soil.
Your brand-new cutting will require excellent drainage to survive, much like other cacti (unless it’s a jungle cactus like the Christmas cactus). The roots of cacti have not developed to become used to extended wet periods. They enjoy a cool splash, but the soil shouldn’t be prone to being wet or humid afterward; instead, it should immediately dry out again.
It’s not too difficult to spot an excellent cactus soil because it will be grippy and contain little to no potting soil at all. You can either purchase a prepared cactus soil combination or create your own by mixing 1 part potting soil, 1 part perlite, and 1 part orchid bark (not too gritty) for your cutting.
As far as planters go, as long as they have proper drainage, you should be set to go. Standard plastic nursery containers are excellent, but some cactus growers like to use clay planters to provide even more drainage. Water can really evaporate through the walls of this substance since it is porous.
Advice: Visit the article on planting succulents indoors for further details on how to grow succulents like cacti.
Which cactus parts can be multiplied?
The majority of cacti are simple to grow from stem cuttings, particularly those with segmented stems like blue candles, prickly pears, and Christmas cacti.
Can you plant a cactus after removing the top?
The enjoyable part is now. With the exception of damaged or dead stems and leaves, almost all of the material you remove is salvageable.
- If pads are placed on top of soil, they will take root and grow into a new plant of the same species.
- After several days, cut stems and trunks should be allowed to callus before being planted to grow new cacti.
- You should immediately pot up any offsets or pups that you remove from the specimen’s base because they are new plants in their own right.
- Compost is used for dead flower stalks and leaves, although certain cactus species develop leaves on the flower stem that can be treated similarly to other species’ pad material. Within a month, the majority of cactus portions will begin to root.
Once you’ve brought your first cactus back to life, you’ll enjoy creating more of the magnificent plant so you can add to your collection or give them as gifts to loved ones.
Can you grow cacti from damaged ones?
As long as the damaged component is otherwise healthy, a broken cactus arm or stem segment can be used to grow a new cactus. If your cactus has spikes, never forget to wear protective gloves. Until the ends of the plant piece harden and start to callus, allow it to sit in a cool, shaded area for about a week.
How long does a cactus cutting take to take root?
It’s time to pot up offsets from cacti after removing them and letting them callus. The ideal medium is grippy and well-draining. You can buy cactus mixes or make your own by mixing 50 percent peat or compost with 50 percent pumice or perlite.
Cuttings only require a pot that is slightly larger than their base diameter. In order to prevent the offset from toppling over, cover one-third to one-half of the base with the medium. Keep the medium mildly moist and place the pup in indirect but bright sunlight.
Although some cacti can take months to root, most do so in four to six weeks. By observing any fresh green growth, which shows that the roots have taken hold and the plantlet is receiving nutrients and water, you may determine when it has rooted.
Is it possible to repair a shattered cactus?
A slow-growing succulent plant known as a cactus has stiff, jointed, mushy stems that are encased in tough, leathery leaves. Unfortunately, it’s also quite thorny! Because of their appealing look and low maintenance needs, cacti have long been a beloved houseplant. The cactus is prone to breaks and dents because of its thick stem and fragile joints, which can be a serious issue for the plant.
Such wounds can serve as points of entry for fungus and cactus rot. Small cactus breaks typically don’t kill the plant, but their gloomy aspect will undoubtedly detract from your home’s visual appeal. As much as we do, you might need to learn what to do if a cactus breaks if you have prickly pets.
What should one do if the cactus breaks, then? Finding out the degree of the harm is the first step. This will help you decide whether to graft it, plant the detached piece into a new plant, or try to rejoin it. A broken cactus can be repaired by simply putting the damaged pieces together. However, grafting or replanting may be your best alternative if the fracture is severe and some of its portions are too far apart from one another.
It can be disappointing to have a broken cactus, especially if you don’t know how to fix it. You don’t need to panic, though, as this article will show you how to take care of a broken cactus by walking you through a checklist of fixes.
Is it better to grow succulents in soil or water for reproduction?
Using water as a medium to root succulent cuttings is known as water propagation. This may contradict popular perceptions of succulents. The general consensus is that succulent plants dislike sitting in water and that doing so encourages root rot.
Therefore, water propagation may go against what we have learned to be true about nurturing and propagating succulents. However, lately I seem to be hearing more and more about water propagation.
According on what I have heard and read, some people believe water propagation to be simpler than more “standard” techniques like roots on dry medium or soil.
I’ve heard a lot of success tales from folks who used water propagation after trying succulent propagation unsuccessfully for a long time. In fact, some people solely reproduce succulent cuttings using water because they see quicker outcomes and more overall success.
According to one notion I’ve heard, succulent cuttings don’t rot in water since water isn’t the main source of rot. When succulent plants are left in moist soil, they are exposed to fungi and other pathogens that can cause illnesses and root rot in the plant. The plants do not decay when propagating in water because they are not exposed to the pathogens that are often found in the soil media.
The fact that the roots generated in water are different from those required for a plant to thrive in soil is another worry people have regarding water propagation. They need to create new roots that are better suited for thriving in soil after they are planted. Others who propagate in water, however, claim that the plants flourish when transferred from water to soil.
As someone who has had excellent success with “soil propagation,” I decided to conduct an experiment to find out how water propagates. To see what might happen, I tried soaking three stem cuttings in water. I picked two distinct plants that I had no trouble establishing in soil. I reasoned that picking a plant that is simple to grow would increase my chances of success. I used stem cuttings from the aeonium (blushing beauty) and the jade (crassula ovata) plants.
The water was placed in three Mason jars, which I covered with clear plastic and punctured in the middle of. I used drinking water that has been treated. Some individuals drink simple tap water. Others have reportedly used distilled water. I didn’t enrich the water with any nutrients. This is not required, based on what I’ve read.
The three stem cuttings were then placed on the jar’s rim with their tips resting directly on the water. When rooting in water, there are two main approaches that people take. One technique is to place the cuts’ end just above the water’s surface. The reason for this is because the cuttings will start looking for moisture and roots. Another approach is to actually let the cuts’ ends touch the water. Although both procedures appear to be effective, I opted for the second one.
I placed the cuttings in a well-lit spot and made an effort to ignore them for a few weeks. The cuts still look the same as I had left them when we returned from a family holiday two weeks later. No roots developed. I just left them alone and kind of forgot about them because the water didn’t seem to need to be refreshed or changed.
I was surprised to notice that the two jade cuttings had a lot of pink roots after another two weeks (a total of roughly four weeks).
Six weeks after the experiment’s start, the jade plants continued to grow more roots while the aeonium remained unchanged.
I took the roots cuttings out of the water and placed them on paper to dry for approximately a day after deciding that it was time to transplant them into soil after around 6 weeks. All three stem cuttings appeared healthy and were not rotting.
The next test will be to evaluate how these cuttings fare in soil after spending five weeks in water and developing water roots. After five weeks, the aeonium cutting hardly developed any roots, but I will still plant it in soil. Since I have grown several aeonium cuttings in soil before, I am almost convinced that this will flourish once planted.
I made a cactus mix and perlite mixture and put the potting mix in little pots. After that, the stem cuttings were placed inside the pot.
The same care is given to these potted cuttings as I do to my other stem cuttings. Keep them in a spot with plenty of light, but shield them from the hot afternoon heat or direct sunlight.
Increases in the quantity and quality of sunlight can be made once these plants are well-established and rooted.
Move to a more shady area if you see that they are getting sunburned. The plants can be moved around to observe where they thrive. After around three weeks, you can pull the stem out to see if the cuttings have rooted. The plant has rooted if it resists being pulled out of the ground and is challenging to do so.
Update:
Please click on to see how these plants are doing four months later “Click here to see updates and photographs for Does Water Propagation Work for Succulents?
A Step-by-Step Guide for How to Procreate in Water is Provided Below:
acquire a cutting. Snip a piece of a succulent plant’s stem. Leggy plants can be a fantastic source of stem cuttings. Leave the stem naked for at least two inches.
OR You can propagate plants by using leaves in place of a stem cutting, or by using both stems and leaves.
Pick healthy leafy plants. A healthy leaf is a better place to start if you want to succeed. Select leaves that are not ripped, torn, damaged, or irregularly shaped. Instead of dried and flat leaves, search for full, plump leaves.
Remove the leaves off the stem gently. Your thumb and forefinger should be used to carefully twist the leaves from the stem. Some leaves are loosely linked to the stem while others are securely attached.
To remove the entire leaf, gently wriggle it back and forth. The entire leaf, including the base where it connects to the stem, is what you desire. The leaf won’t survive if the base does not separate or if it sustains harm.
Launder the cuttings. Till the cut end has calloused or dried, let the cutting air dry for a few days.
Submerge in water. Select the ideal-sized cup for the clippings, then fill it with water. Place the cutting so that the stem or leaf’s tip is slightly visible above the water’s surface.
Another method is to let the cutting to touch the water at the end. From what I’ve heard, both approaches appear to be effective. (I chose to do the latter, where the cuts’ end was in the water.)
Plant the cuttings that have roots. After the cuttings have developed roots, let them dry for a few days. The roots cuttings can be planted in an appropriate potting mix once they have dried out.
occasionally use water. Compared to adult plants, baby plants require a bit more moisture. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
Some people opt to leave the rooted cuttings submerged in water rather than planting them as described in step 7 of the process. In water, the cuttings will perpetually live and thrive. Every few weeks or as needed, replace the water and add fresh, clean water.
Some individuals use hydroponics to grow succulents in water. They enjoy the way it seems and are very successful with them. They can be left with lots of light either inside or outside.
My opinions on the spread of water:
I don’t see the necessity to pursue water propagation since I have success with “soil” propagation. It does appear more simple, and I can understand why it could be appealing to others. Just submerge the plants or set them directly over water, then wait for the roots to form.
The aeonium cutting was the only plant that didn’t actually produce any roots at all when I attempted this procedure; it took approximately 4-5 weeks for roots to start to appear. Given that I only utilized stem cuttings and attempted two distinct plant species, I might have different outcomes with leaf cuttings or with other plant species. Additionally, the stem cuttings I left in water for five weeks were OK and didn’t rot or die.
Naturally, depending on the surroundings, the outcomes would definitely vary for others. Depending on the temperature, the type of plant, etc., some people have more success than others when it comes to soil propagation. I most certainly wouldn’t completely reject this approach and would encourage others to give it a shot, even if it’s only for fun or for those who haven’t had success with the “dry” approach.
According to what I have read and heard, many people prefer this technique because it is quicker and they have more success with it than with soil propagation. Therefore, this is definitely worth a shot if you want to experiment and try something new or if you’ve tried propagating repeatedly but without success. Please select “To learn about further succulent propagation techniques, read 4 Simple Ways to Propagate Succulents.
About
You’ve come to the correct location if, like me, you enjoy succulents. This website is a repository for the succulent-growing knowledge I’ve accumulated over the years and am still learning. Although I am by no means an expert on succulents and cacti, this website was created as a result of years of hard work, love, and many mistakes and learning opportunities.