Watering is one of the most common problems with most houseplants, and snake plants are no exception. While they are less sensitive than other plants, overwatering them might create serious problems in the long run.
Snake plants despise wet soil, and over watering will cause their leaf tips to discolor. During the growing season, you should only water your snake plant once or twice a week. Once a month is more than plenty during the colder months. It’s important to get to know your plants because they’re all different in some way.
We recommend picking up your snake plant before and after watering to get an estimate of how much it will weigh when it needs water, in addition to monitoring the wetness at the top of the soil before watering. When doing this, be careful not to injure yourself on the leaf tips; we speak from personal experience!
Inconsistent watering
It’s possible that the browning of your snake plant’s leaf tips is due to uneven watering rather than just too much water. If your plant goes from being wet to bone dry, it can cause serious problems for the root system and plant, resulting in brown tips. Simply follow a precise watering schedule that corresponds to the growing and dormant seasons. A moisture meter is useful for regulating watering and avoiding over- or under-watering.
Too much light
For your Snake Plant, the right amount of sunshine is more vital than you might imagine. They have a reputation for being able to handle anything from direct sunlight to shaded places. However, if your snake plant receives too much direct sunlight, the leaf tips may become brown. To avoid more leaf burn, try moving your plant further away from the window or to a somewhat shadier location. To eliminate the guesswork, use a light meter to ensure that your Snake Plant receives the proper quantity of light.
Overfertilisation
Most generic plant meals and fertilizers will suggest a dosage for your plants, but this is typically too high for your snake plant, causing browning of the leaf tips. It’s advisable to start with half the recommended amount and see how your snake plant responds. If any browning occurs, flush the feed with extra water and try again with a quarter of the dosage the next time you water.
Low humidity
Snake plants prefer wet settings and may suffer in drier environments. This is especially harmful during the winter months, when we frequently use the heater for many hours each day. A lack of humidity in the air can cause the leaf tips to brown, which can spread to the entire leaf. If you have a lot of dry air, spritz your snake plant with a spray bottle once a week or so to keep it from drying out.
Consider investing in a humidifier if you want an even easier answer to humidity issues. These handy small machines can keep humidity levels at a considerably higher level.
What do you do when snake plant leaves turn brown?
Snake plants (also known as Mother-in-Tongue) Law’s are tough succulents that have become quite popular as houseplants. That isn’t to say they won’t have health problems from time to time that you’ll have to deal with. If the tips of your snake plant’s leaves are turning brown, it’s time to give it some careful loving care. Let’s take a look at each area that may require attention in order to boost the health of your plant.
Check To See If It Has Enough Water
The snake plant requires less water than other plants because it is a succulent, yet it can still become too dry. Browning leaves indicate that your plant is dehydrated. To determine how dry your soil has become, you can use a moisture meter or a finger test. If your snake plant is dry, water it. However, between waterings, make sure to let it dry out.
Make Sure The Soil Is Not Too Loosely or Tightly Packed
Because snake plants don’t like too much water, make sure the soil isn’t too compacted. Your soil may be too loose if your plant shows signs of dryness and brown tips. You may always re-pot your snake plant to ensure that it has the correct mix for its roots and requirements.
Feel For Drafts
A draft is another issue that can alter the dryness of your plant. If your snake plant is close to a heating duct or a warm window, the breeze and heat may prematurely dry out the soil. This is a simple repair; simply relocate the plant to a less drafty place and the problem will be resolved. If you can’t find another position that appeals to you as much as this one, invest in a little humidifier to keep near the plant. This will increase the amount of moisture in the air.
Observe The Plant’s Leaves For Signs Of Illness
If you find brown tips on your snake plant, search for additional signs that it may require assistance. You may have an insect problem if the leaves are curling or falling. The most common pest to invade a snake plant is thrips, which are tiny black bugs. Shake the plant off and rinse the leaves with a solution of water and mild dish soap to get rid of them. A commercial product can also be used.
Prune Away Any Dead Areas
Now that you’ve figured out what’s wrong with your snake plant, it’s time to bring it back to life. Clip away any dead or dying patches with some sharp pruning snips. Your plant will be able to focus all of its energy on its healthy leaves and grow like crazy as a result.
Should I cut the brown spot off my snake plant?
If it’s absolutely necessary, use slow or liquid fertilizers sparingly. Organic blends or a conventional all-purpose fertilizer are also excellent choices. Use a diluted fertilizer if possible.
Protect the plant from cold damage
Unfortunately, the effects of frigid weather cannot be reversed. If only a small portion of the leaf is impacted, cut it off with a sharp, sterile knife. Cut the leaves off at the base if they’re all mushy. New leaves are likely to emerge if the roots are unaffected.
Protect your plants from low temperatures to avoid this problem. Bring your snake plant inside during the winter if it’s outside.
What does an overwatered snake plant look like?
Drooping, yellowing leaves, and easy falling over are all indicators of an overwatered snake plant. To keep the snake plant from dying, remove it from its pot, chop off any rotting roots, and repot it with fresh potting mix. Place the plant in a bright, indirect light source.
Why is my snake plant turning brown and wilting?
Root rot, which is caused by overwatering, is the most common problem with Snake Plants, especially during the winter months. The roots then die back due to a lack of oxygen or a soil fungus overgrowth. Soggy soils promote the growth and reproduction of Pythium, Phytophthora, Rhizoctonia, and Fusarium fungi, which attack plants by spreading into the roots. As healthy roots die, they turn dark and mushy, unable to absorb the nutrients required for growth.
Root rot is difficult to detect since it develops beneath the soil surface and out of sight. Root rot can kill an entire plant in 10 days if the conditions are ideal, such as in pots without drainage holes.
While snake plants will struggle to live in pots without drainage holes, there are a few creative solutions to this problem that you might not consider. To learn how to grow plants in pots without holes, read my post.
Although it is necessary to pot your snake plant in a well-draining pot, you also want your plant to look good and add to the attractiveness of your home. You may have some ornamental pots with adequate drainage in which to plant your snake plant, but I prefer to place it on a drip tray or within a more elegant planter. Here are some of my favorite indoor planter designs.
Symptoms
The rot is first visible on the roots, causing them to turn dark and mushy, which are classic indicators of rot. Root rot causes leaves to turn yellow, wilt, or droop, and eventually become mushy. Once symptoms appear in the leaves, the condition may be beyond repair, putting the entire plant in jeopardy.
Treatment
If you catch the problem early enough, you can repot the plant. Remove as much diseased soil as possible before replacing it with new, clean potting soil. To assist avoid reinfection, apply a root treatment with helpful mycorrhizal species or sprinkle the healthy roots with sulfur powder. Sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot. Beneficial mycorrhizae create a hostile environment for unwanted bacteria and fungi; sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot.
If the root rot has progressed far enough, dissect the plant and keep just the healthy parts. Take cuttings from healthy foliage and root them to propagate a new plant if the entire base is compromised.
Prevention
When the top 2-4″ of the soil has completely dried up, water the plants. During the cooler, winter months, when the plant is dormant, this could mean just watering it every 1-2 months.
Snake plants are perfect for the less-than-careful gardener. For weeks at a time, you can go without watering them. Your snake plant will easily endure 3 weeks or more without water, even in hot, arid conditions, so you won’t have to bother about all the methods to water houseplants while on vacation.
Can Brown leaves turn green again?
Underwatering, sunburn, or overwatering are the most common causes of browning leaves.
The soil grew too dry for too long between waterings if the leaf tips are turning brown and crunchy. The plant may also drop leaves as a result of this. This does not always imply that you are regularly under watered; the browning could have occurred only once. Although the brown leaf tips will not return to green, you can trim the brown margins to restore the plant’s appearance. More information can be found here.
If you notice brown patches on your leaves, this could be a sign that you’ve overwatered them. You’ll notice some yellowing on the leaves if the plant has been overwatered. More information can be found here.
If you notice dark stains in the center of your leaves, it’s possible that they’re produced by too much direct sunlight. Some plants are sun-sensitive and will quickly burn if exposed to direct sunshine. If this is the case, try shifting your plant to a spot where it won’t be exposed to the sun’s direct rays.
– If you move your plants from indoors to outside during the summer without acclimating them to direct sunshine, this is likely to happen.
Do snake plants need sunlight?
- Plants can grow in a wide range of light conditions, from low to high. They grow faster in brighter light, but direct sunshine, especially when plants are outside, burns leaves. A 10 foot distance from a west or south window is excellent.
- Use a commercial potting soil mixed 50:50 with a cactus and succulent mix when potting snake plants. This results in a loose, quick-draining soil with many air spaces, which should help minimize overwatering.
- Fertilizer: These slow-growing plants don’t require much in the way of fertilizer. Snake plants should be fed any houseplant food twice a year, once in the spring and once in the summer. These plants are low-maintenance.
- Snake plants do well in hot, dry environments. For the summer, consider placing potted ones in bright shade outside. They will flourish in the landscape where there is no frost or snow. Just make sure these plants aren’t invasive in your area by checking with local nurseries.
- Snake plants are slow-growing and rarely require repotting (they actually grow better when pot-bound). Low-light plants may need to be repotted every 5 to 10 years. Expect to transfer snake plants in stronger light every 3 to 5 years.
Is my snake plant getting too much sun?
Snake plants, also known as mother-in-tongue, law’s are practically indestructible and thrive in the absence of human intervention. This is ideal for folks who have a habit of killing plants by unintentionally.
Snake plants are so tough that they can withstand droughts and a variety of other difficulties, therefore they don’t mind being in direct sunshine. Although snake plants can withstand direct sunshine, they prefer indirect light. Snake plants are prone to leaf burn when exposed to direct sunshine.
Your snake plant will alert you if it receives too much light. If the leaves of your snake plant start to turn odd colors, such as yellow, brown, or pale, move it away from the light source.
Heat, as well as overexposure to light, can result in leaf burn. Similarly, if you see your snake plant is turning pale, move it away from the light. Overexposure to light in general, not just direct light, is a common cause of pallor.
Do not be alarmed if your snake plant suffers leaf burn. Snake plants are tough and resilient, recovering swiftly from nearly any harm. Leaf burn will only cause long-term damage in extreme circumstances. Similarly, your snake plant will not be killed by these conditions.
How often should I water my snake plant?
Your Snake Plant only needs to be watered every two weeks, and you should let the soil dry completely between waterings to avoid overwatering and root rot. If the soil is still moist after two weeks, water your snake plant once a month throughout the winter months.
How do I know if my snake plant is healthy?
Southern blight is a snake plant disease that causes mushy leaves. Sclerotium rolfsii is a fungus that causes this disease.
The fungus can enter the snake plant’s stems, where it consumes the stuff inside.
Before the plant dies, the leaves of your snake plant will become brown and possibly white, and they will feel mushy and soft. This happens when the fungus infects the tissue of your snake plant.
If you don’t take precautionary actions before determining that southern blight is the cause of your snake plant’s squishy leaves, your plant will die within a week.
Measure the Plant’s Height
When you have a baby, you keep an eye on their size to make sure they’re developing normally. Similarly, keeping note of your snake plant’s height over time will help you determine how healthy it is.
A fully mature snake plant leaf can be up to three inches broad and six to eight feet tall when cultivated in a container. You may observe two to four new leaves and three to six inches of fresh height development per season.
If your snake plant isn’t growing at all or isn’t growing as fast as you’d want, you should investigate why.
Many reasons, many of which I’ve already mentioned, can prevent your snake plant from developing as it should.
A snake plant that has been submerged in water or that has been overwatered is unable to flourish. Plant diseases will obstruct growth as well.
A lack of sunlight is also a concern. The snake plant is shade-tolerant, and it can even survive in complete darkness if that’s all you have.
It’s vital to remember that plants growing in low light will not develop as quickly or as robustly as those growing in more perfect lighting circumstances.
Review the Leaf Uprightness
The snake plant is known for its long, sword-like leaves, which have earned it the moniker “mother-in-tongue.” law’s What if the leaves don’t stand straight up as they’re intended to?
Don’t get me wrong: your snake plant’s leaves don’t have to be exactly straight. A few people can lean or even tilt their heads.
When the bulk of the leaves are drooping, stretching, or bending, there is a concern.
What could be causing the snake plant’s leaves to sag? Returning to sunshine, a lack of it can cause your snake plant to become drooping and melancholy.
Your snake plant’s leaves will droop if you overwater it. Because the plant’s roots are so wet, everything immediately becomes floppy and droopy.
Even if you have proper watering habits, if your snake plant doesn’t have enough drainage, its leaves will be anything but upright.
Your snake plant houseplant’s container should ideally have numerous drainage holes, each of which should be large enough to prevent water from becoming trapped in the pot’s bottom.
Water will be trapped in compacted soil. Replace the plant’s soil every few years to avoid this.
The last reason your snake plant’s leaves may be drooping is because of a lack of humidity.
The snake plant does not require high levels of humidity. It prefers a relative humidity of roughly 40%, which is right in the middle of the range for a home or workplace.
Your snake plant’s leaves can bend to the point where they touch the floor if the humidity is very low.
Do the Fingertip Test
When it comes to determining whether or not your snake plant is healthy, the fingertip test will be one of your finest indicators. All you have to do is stick your finger into the soil around your plant and feel around.
What do you have a strong desire for? The majority of the time, it’s moisture. A healthy snake plant has semi-moist soil that is slightly drier than normal but not fully dry.
You should water your snake plant once the earth has totally dried out, but not before that.
Feeling about in the dirt will also allow you to determine how compacted the snake plant’s soil has become, at least to some extent. How is water meant to get to the roots if you can hardly get your fingers into the soil?
It can’t, which implies it’s becoming stuck in the pockets of the dirt. Wet water is bad for the snake plant, so make sure to replace any standing or moist soil as soon as possible.
Root rot can be considerably reduced by replacing any mushy soil in your snake plant’s pot.
If you have a habit of overwatering your snake plant, I recommend learning how to grow it in LECA. Snake plants are an example of an indoor plant that thrives in LECA.
Inspect the Root Ball
When the time comes to remove your snake plant from its present pot, inspect the root ball thoroughly.
The root ball is your plant’s heart and soul, yet it’s something most indoor gardeners don’t get to see very often. What should your snake plant’s root system look like when you examine it?
The roots of a healthy snake plant should be white and solid. If your plant’s roots are brown or black and mushy, it’s suffering from root rot. The decaying roots will have an unpleasant odor as well.
As promised, I’ll speak briefly on root rot. Root rot is a plant-killing disease caused by the presence of more water than oxygen in the roots. Overwatering is the most common cause of root rot, although compacted soil can exacerbate the problem.
The roots will die first, followed by signs such as mushiness and leaf discoloration on your plant. The sickness had already advanced quite far by that stage.
Trim away the dead roots, repot your plant in drier settings, and restrict your watering habits going forward to prevent your plant from root rot.
How do you bring a snake plant back to life?
Snake plants thrive in hot, sunny conditions, although they prefer to be in the shade, frequently under tree canopies.
In some situations, snake plants can adapt to full sun, although they prefer brilliant indirect light and can even thrive in deep shade.
(Shade can help snake plants develop more slowly.) (For more information on why a snake plant isn’t growing and how to fix it, see my article.)
If the snake plant is relocated from a shady location to bright sunshine, it will burn and develop brown spots on the leaves.
The sunburned areas of the leaf do not recover in appearance, but they do not harm the snake plant, which can live for a long period even if its leaves are sunburned.
However, cutting the damaged leaf blade back to the earth to encourage additional healthy leaf growth is a good idea.
Because the snake plant can become quite top heavy, larger pots with a larger base prevent it from tumbling over. If a snake plant topples over, it might cause bruising.
Key Takeaways:
- Overwatering and moist soils cause the leaves to become yellow or brown and droop, resulting in a dying snake plant. Cold stress can be caused by temperatures below 50°F, resulting in a dying snake plant.
- If the leaves curl, it could be a sign of cold stress if they’ve been exposed to freezing temperatures, or it could be a sign of drought stress because the leaves store water.
- Sunburn is often indicated by brown dots on the leaves. Snake plants prefer bright indirect light, while direct sunlight can cause brown patches.
- To resurrect a dying snake plant, emulate the conditions of its native habitat by watering it seldom, using indirect light, and keeping it warm to avoid cold stress. Take leaf cuttings from healthy tissue to propagate the snake plant if it is dying.